Question about Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer


I have a 19" Toshiba TV/VCR/DVD combo. one night my remote control just stopped working. naturally, i assumed it was the batteries. so i changed them, twice. and still no success. i then tried operating the tv with my universal remote that came w/ my cable box because it is programmed to control the volume on my tv. that didn't work either. i tried cleaning the sensor on the tv but nothing. is it damaged? if so, do i need to haul my bulky crt to a repair shop and possibly pay an arm and a leg to replace/fix it? or is it something i can do myself? HELP!

thanks :)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

I'm sorry, but it's "shop time" for your set. You have lost the clock or voltage going to the interface panel, and that's why nothing works from the remote or front panel...accordianman

Posted on Feb 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sanyo TV connect to cable box connect DVD player

If your DVD/VCR combo player has three RCA connectors (yellow, red, and white), you can connect them to the corresponding inputs on the front of your TV.

Dec 29, 2012 | Sanyo Standard (CRT) Televisions

1 Answer

I am trying to get a remote code for my slyvania 6719

I also can't find the remote for my Sylvania
TV/VCR/DVD combo...
Model number 6719DF. I don't normally use this tv
(it's an extra spare that I plug into our generator when
the power goes out... since our regular family TV is
quite big and set into the wall making it difficult to
track cords around, I drag this crappy Sylvania down
from our dining room to our family room) I did
happen to find an old Zenith universal remote that
does work with it in some ways (See directions
below). I can turn the TV on and off, set the channels,
language, clock.. etc through the Input select button
on the universal remote but can't set to "Game Mode"
after using connections with video/audio input cords
plugged into the front panel of the TV. So
Playstations, extra dvd players or vcr's, etc won't
Switching from the VCR to DVD and vice versa does
require manually setting the tv itself (remote doesn't
work with that) but at least I can set sub titles, fast
forward through chapters on Dvd's and control the
volume, etc without having to constantly walk over to
the tv.
Programming the remote: I've noticed a lot of people
have tried using codes supplied by different universal
remote providers and couldn't find a code that
worked using their lists with this particular model...
there is a way that it can be done but it's a bit more
time consuming:
Many types of "universal" remotes give the option of
"scanning" the electronic device for a code if one is
not available or the one provided with lists does not
work... Every universal remote though needs certain
buttons pushed during the "scan" and they are all
different! Ha! So if you lost or misplaced the MANUAL
as well (like me!) you might need to do a search on a
manual for your particular universal remote, but I can
at least give you directions on programming a
"Zenith" Universal remote to "scan" for a Sylvania
TV/DVD/VCR combo model 6719DF:
Using the Zenith Universal Remote or any Universal Remote using it's "scan" method:
1: Shut off the TV
2. Press and hold "Code Search" on the remote until
the red LED
light lights up and stays lit.
3. Press the device button for the device (In my case,
for my crappy Sylvania combo, I pressed "TV".)
The LED light will blink once.
4. Scanning: Slowly press and release the "Power"
button on the remote, waiting a few seconds between
while watching the TV to turn on. It's very important
that you pause in between because if you do it too fast
and the TV turns on before you press the power
button again... you'll have to start all over. I've
learned that lesson.
It took 160 presses each time on that button to get the
correct code scanned! I had to do it over 3 times
before I stopped myself beforehand because I was
pressing it too quickly..
5. Right after the TV power turns on, press the "Mute"
button on the remote to set the code. It should work with few limitations (no "game" mode)
after that.

May 26, 2011 | Sylvania 6719DF 19" TV/VCR/DVD

2 Answers

I want the codes for my remote to control the vcr/dvd rather than just the tv

The Sony remote that came with your TV will not be able to code to your DVD / VCR combo unit, combo units have to be operated by their original type/style remote, because they operate on very specific frequencies.
Now you may be able to code the combo units remote to operate the TV, but usually not the other way around, it just won't work.
Good luck !

Jan 27, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Uneiversal Remote Code

The model of the TV is not important as the code list is by Make only and usually list 3 ot 6 codes to try for each make. Having the Remote control model number is more important so you can find the right instructions and code for your remote.
Check here

Feb 18, 2009 | Toshiba MW20H63 TV

1 Answer

Problem with old TV

The channel is almost always 3 or 4. Be sure you have the VCR connections correct. Just hook up the TV and VCR alone to start with and try both the VCR and DVD. Also the output of the VCR should show a blue screen.

Dec 17, 2008 | Memorex MT1194 19" TV

1 Answer

Hooking up dvd

I did not get an answer, but I am not interested in paying for premium assistance. I will keep trying, thanks.

Sep 21, 2008 | Emerson ET-20F7 19" TV

1 Answer

Connecting dvd/vcr combo with tv and digital cable box.

You trying to put the DVD/VCR combo between the cable box and the TV? OK, cable out goes to vcr in, vcr out goes to tv, I think you got that. Now there should be a tv/vcr button on the vcr/dvd, you need to press that when the unit is on. Also, make sure you are on the correct input on both the vcr and the tv, usually video 1 or AUX and choose line in or L1 on the vcr/dvd. If the tv/vcr button is toggled, itll completely bypass the vcr/dvd player.

Mar 03, 2008 | Toshiba 32A41 32" TV

1 Answer

EWC19T3 Emerson TV/VCR/Combo remote window sensor issues

We ordered a new remote for our Emerson TV thinking it had quit working. It's not the remote! What is causing this problem where we can't turn on the TV or adjust the volume with the remote?

Jan 20, 2008 | Standard (CRT) Televisions

1 Answer

Connecting VCR/DVD combo

If you are able to you can connect to the RF connector (F Type Conncetor) on the TV. This should work. The layout is from the VCR (RF to TV) to the TV antenna F type connector from your Cable box to the Antenna in of the VCR that way you have cable through the VCR, and access to you VCR and DVD all controlled by the Cable and VCR remotes (set TV to Channel 3, set VCR to Channel 3) and use the Cable box as the tuner, Use the TV remote to switch between Cable and VCR inputs then use the VCR remote to switch between the VCR and DVD input.

Sep 20, 2007 | GE 25GT516 TV

2 Answers

TV remote is turing on VCR

Is it a original remote or a replacement universal remote? If it is the latter, then it looks like someone has accidently programmed it for the frequency which is compatible with the recieve frequency of the Remote sensor of your VCR or DVD player.

May 09, 2007 | Daewoo DTQ-19V1FC 19" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-27FS100 27" TV Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66444 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides