Question about Office Equipment & Supplies

2 Answers

Royal Cash Register 130 cx Does Not Print Correctly

Our Royal 130CX Cash Register does not print the entire transaction only small codes. It is as if the printer is stuck...

Posted by on

  • ramonarae Mar 05, 2008

    I put in a new ink roll and the printing is heavy in some spots and too light to read in other spots. This is a Royal CX120. Any suggestions? Seems like keys need cleaned, but haven't got a clue how to do this. Help.

  • parisianlane Feb 19, 2009

    Our Royal 130cx doesn't print the entire transaction. Seems as if printer gets stuck.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 21 Answers

Cleaning and alignment is needed to solve these problems. As you can notice, the printer has various gears and small parts on it. Although the alignment for this kind of printer model is too complicated that only an authorized technician is capable of doing it. If you can look for an authorized service center for your cash register on your area then try to contact them. They either render home service or you will have to bring your unit to them.

Posted on May 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Maybe uou have a some paper in the tray path,tru to clean it

Posted on Feb 01, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Royal cash register 485 CX

Try and study the route the ribbon is suppose to go and try again

Feb 05, 2014 | Retail Supplies

1 Answer

Royal Cash Register 120 CX

we'll find that for meantime, try not to run any transaction, eh?

Mar 19, 2008 | Office Equipment & Supplies

1 Answer

Hoe do I turn off my cash register it isn't working and it won't ring up anything

Did you sort out the problem?
I haven't worked with this model but one of the users has Royal cash register manuals here:

Aug 13, 2013 | Royal 14509 X Alpha 583 Cx Cash Register...

1 Answer

How do you Z out a 435dx

"Z" (Prints End-of-Day Management Reports and Resets Totals) - Prints the "Z" management report at the end-of-the-day and resets totals to zero (except "locked-in" grand total).
To print Management Reports, slide the control switch to the "X" or "Z" position as needed, then press the [amt tend/TOTAL] key. Refer to explanation starting on page 37.
Transaction data is maintained in the memory of the cash register as long as the battery back-up system is in effect. This data can be printed as a report for management review.
The Management Report can be printed from either the "X" or the "Z" position on the Control Switch.
"X" POSITION REPORT (Refers to a mid-day reading)
The "X" position report prints the accumulated information and RETAINS ALL TOTALS IN MEMORY. Use this position to print periodic readings of transaction information at any time through-out the day. (Some users call the X-report a mid-day report).
"Z" POSITION REPORT (Refers to an end-of-day or close-out reading)
The "Z" position report prints the same information as the "X" report. However, once this report is printed, ALL TRANSACTION TOTALS ARE RESET TO ZERO except the Grand Total. (Some users call the Z-report an end-of-day report).
NOTE: To prevent accidental printing of the "Z" report, set the security code as explained in the SECURITY CODE section.
Once this code is set, a "Z" report will not print until the security code is entered. If a "Z" report is attempted without entering the security code, the prompt "SEC Code" will appear in the display.

IMPORTANT: Once a "Z" reading is taken, it cannot be duplicated, so be sure to have plenty of paper in the register.
1. Set the Control Switch to either the "X" or "Z" position.
2. Press the [amt tend/TOTAL] key.
NOTE: If a security code has been assigned, be sure to enter the security code before pressing the [amt tend/TOTAL]
1. Set the Control Switch to the "prg" (Program Mode) position.
2. Type [2], type [0], then press [RA].
After this operation, the grand total resets to zero.

Oct 21, 2011 | Royal 435dx Electronic Cash Register

2 Answers

Sir good evening i have cash regester casio 160cr.Error code is e94 pls help how i can run my cash regester thanks.

I suggest you to reset your equipment.Here is how:
Remove AA batteries and unplug register from wall for 15 minutes.

Two more options;
Option #1:
To print the transaction details before clearing the journal memory:

VERY IMPORTANT: Do not interrupt once printing begins or the journal will not be cleared.

1. Make sure the paper is full in the register.
2. Turn to Z mode.
3. Hit the RC key until the screen displays "E94".
4. Hit Cash Amount Tender.

Once the printing is completed, the journal is cleared and the register is ready for use.

Option #2:
To clear the journal memory WITHOUT printing the transaction details:

1. Turn to Z mode
2. Hit RC key until the screen displays "E94 Clear"
3. Hit Cash Amount Tender

Nov 27, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

We purchased this model used and were wanting to know how to reprogram...set the date, taxes, time and basic functions. We are not wanting to set up dept. if it has this capability. Just cash, check and...

You probably know that the website doesn't have the manual link yet. So your best bet is to have a look at a manual for other models.

Royal 110cx

Royal 130cx

Aug 26, 2010 | Computers & Internet

2 Answers

Cash register PE ondisplay and nothing will work

It means printer error. Usually after a paper jam. Clear any paper out and try turning off and on at the wall. ***************************************************************************** *****************************************************************************
All of these manuals can be downloaded at:
royal 110cx User royal 115cx User royal 130cx User royal 425cx User royal 435dx User royal Alpha-580 User Programming royal Alpha-583cx User Programming royal Alpha-600 User Programming royal Alpha-600sc User Programming royal Alpha-601 User Programming royal Alpha-710ml User Programming royal Alpha-9155sc User Programming royal Alpha-9180sc User Programming royal TS4240 User Programming

Mar 02, 2010 | Office Equipment & Supplies

4 Answers


Try this, for example june 30 2004 =
Put the mode key in PRG position In round number keys press 063002 then press #/ST/NS key
If that works to set the time in round number keys press 1100 then press Qty/Date or 1305 for one 05 pm. I have a 587 cx and can't fiqure out how to print my reports X Z

Aug 21, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

78010 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides