Question about Mitsubishi WS-65807 65" Rear Projection Television

1 Answer

My ws-65807 wont turn on or stay on. shop vaked the board and looked at the fuse and the fuse looks fine. is there anything else I can do?

Posted by on

  • richiethebas Dec 20, 2009

    2,2 is flashing that we got. What does this mean?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 14,553 Answers

Do the self check if it comes on for a moment and then the power light goes off.

On the front of the set hold both the MENU and INPUT(also called DEVICE) together for at least five seconds and then release both buttons.

The power light will blink an error code--for example 2 blinks a pause and 2 blinks--it will repeat it several times. 2,2 is the most common error code for this set.

Let me know what you find and I will tell you what it means--it is designed to give a quick idea of what is wrong with the set.

if this helped you rate this solution as I do this here for free.

SD TECH

Posted on Dec 19, 2009

  • SD Tech
    SD Tech Dec 20, 2009

    it means one of the two fuses that are soldered in for the convergence circuit are blown.

    This model uses two of the STK-392-570 CHIPS---blown fuse means one or both are bad.

    What needs to be done is replace both chips and fuses and adjust set.

    If it is of interest to you I have start to finish instructions for this repair--done hundreds of them.

    shops will get 300 or more for this but actual parts cost from EBAY is under 30 dollars total.

    Let me know if you are interested in the instructions.

    SD TECH


  • Jacob Melgoza
    Jacob Melgoza Aug 09, 2017

    Could I get those instructions

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Television has sound but no picture.


The liquid is actually CRT coolant dripping down onto the circuits. It will need to be cleaned with denatured alcohol and then dried good. Then any components in the area where the liquid was will need to be resoldered as the coolant will destroy the solder and the circuit traces if left too long as its highly corrosive to solder.

Nov 18, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Where is the fuse located for the convergence IC for ws65807


There are two 5 amp pico fuses on the same board as the IC the board location jmbers are f(A04 and F9A05 they are solid green and look like a resistor without color bands.

Mar 07, 2010 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

The power board in my tv has gone out and they no


In short...probably not!

Sounds like its time to buy one of those newfangled, big-screen plasma units you can hang on the wall.

Nov 19, 2009 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Attempt to turn on greenlt comes on for 2 secs then shuts off


WS-65807?The most likely problem is one or both of the fuses that protect the 2 convergence chips are blown. The set detects no voltage and shuts down. This set uses 2 stk-392-570 convergence IC's; I have step by step start to finish instructions for this repair along with photos that show the fuses and protect resistors.

If you can do the repair yourself---the fuses (called pico fuses) should be checked first---if either of the 2 for the convergence circuit are blown---you have to replace them and BOTH chips.

If you are not able to do this repair yourself, find someone in your area who has done this kind of repair; any good tech can do this repair in your home--takes about an hour. Most shops will try to charge 300-400 for this repair-----I do lots of them here for 200-250 total. If a shop says it "has to go to the shop", keep looking.


I do this here for free so if this information has been helpful take a minute to give me a vote here.

If you have any questions reply to this post.

Sep 07, 2009 | Mitsubishi WS-65807 65" Rear Projection...

4 Answers

Turns off as soon as I turn it on. ws - 65819


I had the same problem. The repairman said the Convergence ICs were bad, located on the big aluminum heat sinks on the center board in the TV. He replaces both, and a couple of fuses (that look like resistors).

The tv worked fine for a couple of days then did exactly the same thing. They are coming back out to fix it next week. If there is anything different, I'll post an update.

Nov 22, 2008 | Mitsubishi WS-65819 TV

1 Answer

Mitsubishi WS-65807 blinks '22'


Jim,
yes the convergence Ics are what cause the two picos to be open they are both 5 amp picos. You can get the picos, the convergence ICs and the factory service manual for your model at the following link.your model is known as the V17 chassis for service manuals and you should require two STK392-570 Convergence ICs. Heres the link they provide free instalation instructions.
http://servicemanuals.vstore.ca/

Oct 02, 2008 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Mitsubishi WS-65807 blinks '22'


I replaced the pico fuses and the convergence IC's. fuses poped right away code 22 . Further inspection of the board showed the coolant had leaked out of the center projector and fried the board. Not willing to pay $300. Passed it on to someone else

Oct 01, 2008 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

Won't power up.


Check the center board for two green 5amp Pico fuses F9A04 and F9A05 if those two picos are blow, replace both STK392-570 convergence ICs on that same board and the set will be repaired. Fuse F9A05 will read open in circuit but F9a04 wont so its best to lift one side of those two pico fuses out of circuit to check them. (* % of the time a 22 code in that chassis its the ICs having shorted and it will blow those two picos. You can get replacement parts at the following link.
http://servicemanuals.vstore.ca/

Aug 08, 2008 | Mitsubishi WS-65807 65" Rear Projection...

Not finding what you are looking for?

Open Questions:

See all Mitsubishi WS-65807 65" Rear Projection Television Questions

Mitsubishi WS-65807 65" Rear Projection Television Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1255 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...