Question about XFX GAMEPAD | GA-CP03-SK0200G (GACP03SK0200G)

5 Answers

X gear pc dual reflex controller

After clicking  the config button in the controller window it says no device is connected. and while inswtalling the device it says that the cotroller has not passed the windows logo testing. i am also unable to use the trick sticks and not getting vibrations. would like to get assistance. thank you.

Posted by on

  • 3 more comments 
  • Anonymous Feb 13, 2008

    the same

  • Anonymous Mar 10, 2008

    yep, same thing on XP SP2.
    can't instal the drivers.

  • Anonymous Jul 18, 2008

    Te driver cd is lost and i cant plsy


  • foysal Dec 27, 2008

    It cannot find XFX XGAR gamepad in my PC

  • jhepodi Jan 13, 2009

    the same thing goes for me. I have windows xp sp pack 3. When installing the driver there occurs a notice about the controller not being connected to the pc while in fact it is connected (LED lights to green).

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Put a willy in ur bum

Posted on Oct 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can find the driver in the website www.xfxforce.com if you register yourself and then regist the product using the serial number in the back of the pad.

Posted on Oct 29, 2008

Ad

Where can i download THE Drivers?

Posted on Jul 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ho can i find x gear driver

Posted on Jun 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Get a powered USB Hub and plug in the controller into it. (I got a Logitech 4 port).

Did the job for me. XP immediately detects it as a "USB Joystick".
Install from the CD, and it doesn't come up with the message asking you to plug it in.

Playing my games with 2 controllers attached to the USB hub. Excellent!

Posted on Mar 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saying:/windows/system32/config/system is missing or corrupted n i dnt now how to fix it wut link exactly do i have to download to my usb to fix it n wut r the steps?


Assuming it is windows XP here are the steps to fix that error:
To complete part one, follow these steps:
  1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
    Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line:md tmp
    copy c:\windows\system32\config\system c:\windows\tmp\system.bak
    copy c:\windows\system32\config\software c:\windows\tmp\software.bak
    copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
    copy c:\windows\system32\config\security c:\windows\tmp\security.bak
    copy c:\windows\system32\config\default c:\windows\tmp\default.bak

    delete c:\windows\system32\config\system
    delete c:\windows\system32\config\software
    delete c:\windows\system32\config\sam
    delete c:\windows\system32\config\security
    delete c:\windows\system32\config\default

    copy c:\windows\repair\system c:\windows\system32\config\system
    copy c:\windows\repair\software c:\windows\system32\config\software
    copy c:\windows\repair\sam c:\windows\system32\config\sam
    copy c:\windows\repair\security c:\windows\system32\config\security
    copy c:\windows\repair\default c:\windows\system32\config\default
  6. Type exit to quit Recovery Console. Your computer will restart.
My YouTube Channel
Click Here Live Tech Support

May 03, 2013 | ASUS Eee PC 2G Surf Notebook

1 Answer

Card reader


what happens if you disconnect the card reader restart your computer then reconnect it

does it activate the found new hard ware wizard

you might have to contact the manufacturer of the card to get the updated driver for windows 7 or go to the manufacturers web site to update the driver

First, please disconnect all USB devices and then perform the following steps:


Click "Start" button, type "devmgmt.msc" (without quotation marks) in the "Search" bar and press "Enter". Click "Continue" if necessary.



In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".



Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".



Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.

hope this helps

Jul 27, 2012 | Lenovo 3000 K100 57061334 Intel Desktop...

1 Answer

I cant see the pic on pc


I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for the compatible Operating Systems for the Camera:

The compatible Operating Systems are as follows:

Windows XP Windows 2000 Professional Windows Vista Mac OS X

Please follow the below troubleshooting steps below if your Computer is installed with any of the above mentioned Operating System. Please note that other Operating Systems are not compatible with your Camera. Please make sure that the connections are secure. Prior to making any adjustments, first ensure you've firmly connected your Camera's USB cable into the USB port on your PC. Power off and disconnect your Camera from your computer. Restart your computer. After your computer is rebooted, connect your camera to your computer using the USB cable provided. Note: Connect your camera to an alternate USB port, preferably on the back of your computer. Select MTP instead of default PC from the USB select screen appears on the LCD screen after connect the Camera to the Computer. If the issue persists, please check the Device Manager driver conflicts by following the steps: Connect the camera to the computer with the USB cable. Turn on the camera. Open the Device Manager of the operating system.
Windows 2000 - Right-click the My Computer icon, left-click Properties , left-click the Device Manager tab. XP: Right-click the My Computer icon, left-click Properties , left-click the Hardware tab, left-click the Device Manager button. Windows Vista: Click the Start button, click Control Panel , click System and Maintenance , click the Device Manager button. Windows 7: Click the Start button, click Control Panel , click Hardware and Sound , under Devices and Printers , click Device Manager. You may try the steps before give up even if the Operating System is Windows 7 as it supports many cameras with default driver. In the Device Manager window, at the left of Universal Serial Bus controllers , click the PLUS (+) symbol. Under Universal Serial Bus controllers , right-click Sony DSC or USB Mass Storage Device to display the drop-down menu. In the drop-down menu, click Uninstall or Remove. In the Confirm Device Removal dialog box, click the OK button. Restart the computer. Follow any on-screen instructions to complete reinstallation of the USB driver.
If the issue persists, reset the Camera by removing the battery for more than one minutes and check the operation. I hope following the above troubleshooting steps should definitely resolve the issue. If you require any further assistance, please get back to me with the exact Operating System, I can definitely help you with this. If a PC connection is not recognized by a Computer, most probably it will not be a hardware issue. Thanks for understanding.

Apr 10, 2011 | Sony Cyber-shot DSC-S750 Digital Camera

1 Answer

How can i connect my sony dsc-w50 to pc. any drivers needed to install?


I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for the compatible Operating Systems for the Camera:
The compatible Operating Systems are as follows:
  • Windows XP
  • Windows Me
  • Windows Vista
  • Windows 7
  • Mac OS X

Please follow the below troubleshooting steps if your Computer is installed with any of the above mentioned Operating System. Please note that other Operating Systems are not compatible with your Camera.
  1. Please make sure that the connections are secure. Prior to making any adjustments, first ensure you've firmly connected your Camera's USB cable into the USB port on your PC.
  2. Power off and disconnect your Camera from your computer.
  3. Restart your computer.
  4. After your computer is rebooted, connect your camera to your computer using the USB cable provided. Note: Connect your camera to an alternate USB port, preferably on the back of your computer.
  5. Select MTP instead of default PC from the USB select screen appears on the LCD screen after connect the Camera to the Computer.
  6. If the issue persists, please check the Device Manager driver conflicts by following the steps:
  • Connect the camera to the computer with the USB cable.
  • Turn on the camera.
  • Open the Device Manager of the operating system.

Windows 2000 - Right-click the My Computer icon, left-click Properties , left-click the Device Manager tab.
XP: Right-click the My Computer icon, left-click Properties , left-click the Hardware tab, left-click the Device Manager button.
Windows Vista: Click the Start button, click Control Panel , click System and Maintenance , click the Device Manager button.
Windows 7: Click the Start button, click Control Panel , click Hardware and Sound , under Devices and Printers , click Device Manager. You may try the steps before give up even if the Operating System is Windows 7 as it supports many cameras with default driver.
  • In the Device Manager window, at the left of Universal Serial Bus controllers , click the PLUS (+) symbol.
  • Under Universal Serial Bus controllers , right-click Sony DSC or USB Mass Storage Device to display the drop-down menu.
  • In the drop-down menu, click Uninstall or Remove.
  • In the Confirm Device Removal dialog box, click the OK button.
  • Restart the computer.
  • Follow any on-screen instructions to complete reinstallation of the USB driver.

If the issue persists, reset the Camera by removing the battery for more than one minutes and check the operation.
I hope following the above troubleshooting steps should definitely resolve the issue. If you require any further assistance, please get back to me with the exact Operating System, I can definitely help you with this.
If a PC connection is not recognized by a Computer, most probably it will not be a hardware issue.

Mar 26, 2011 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Why can't I print dual sided with Hp4250dtn using pc with win 7 64 bit


If you go to PRINTERS in the Control Panel.
Right click on your printer.
Drill down to PRINTING PREFERENCES
Go to FINISHING.
Make sure that "print on both sides" is checked.

Close that window. Now drill down to Properties at the bottom.
Go to "device settings". Drill down to "installable options".
Make sure that "Duplex Unit" is INSTALLED.

Print out the CONFIG pages. On the first page right side, look for duplexer. I believe that it is down where the paper trays are listed. Make sure that it is there.

Feb 10, 2011 | HP LaserJet 4350dtn Printer

1 Answer

Stack overflow at line 598


Stacks are reserved memory that programs use to process hardware events. A stack overflow occurs when there is not enough space in memory to run the hardware interrupt routines. To resolve these behaviors, you can modify the "STACKS=" line in the Config.sys file, eliminate terminate-and-stay-resident program (TSRs), and eliminate hardware conflicts.

When Windows delivers an error message that is related to an internal stack overflow, there is not enough space in memory either set aside or available to handle the calls that are made to the computer hardware. There are several things to consider when you troubleshoot this behavior:
  1. The Config.sys startup file may not be properly configured for the Windows installation. Use the following values: STACKS=64,512 ;(this is the maximum allowed)
    FILES=60
    BUFFERS=40 If you are using the dual-boot capabilities in Windows, the Config.sys and Autoexec.bat files may not contain the correct configuration to run Windows. When you are dual-booting between Windows 3.x and Windows, these files may not have been renamed back to Config.dos and Autoexec.dos.

    Examine the Config.sys file to determine if files such as Himem.sys or Emm386.exe are loaded from a folder other than the Windows folder. If so, boot Windows by using the Safe Mode Command Prompt Only option. Rename the Config.sys file to Config.dos and the Autoexec.bat file to Autoexec.dos, and then restart your computer.
  2. Some TSRs may be interfering with Windows. Disable any non-boot device drivers in the Config.sys and Autoexec.bat files. If you install from Windows 3.x and you receive a stack overflow error message, check the Win.ini and System.ini files for non-Windows-based programs or drivers that are loading.
  3. There may be an incompatible hardware configuration. Check the port and IRQ settings of the network adapter, sound card, and modem. Make sure that there are no COM2/COM4 or COM1/COM3 conflicts and that no devices are sharing IRQs. Disable or remove conflicting devices.
  4. The computer may need a BIOS upgrade. Check the BIOS version and contact the manufacturer of your computer for information about a BIOS upgrade.

Hope this helps. Please rate my response.
Thanks.
Have a good day

Dec 28, 2010 | Microsoft Computers & Internet

1 Answer

Installed windows 7 and the left click does not work on the mouse, i have installed the drivers for win 7


Go to control panel- hardware and sound - devices and printers - Mouse. Go to buttons and check if the config is ok. If that doesnt solve ur problem, i have the same issue with my logitech g5(gaming mouse having issues... u believe? hehe) middle button keeps getting stuck, and even after i unplug it, windows records it as if it was still there and still stuck!. This is a hardware problem obviously, try checking that.
Check it on another pc too, just to be sure its ur config.

Nov 03, 2009 | Logitech LX8 Mouse

1 Answer

Dual monitor, Intel 82915G & nVidia RIVA TNT2 64, FC6, Dell Gx520


Here is a little guide for setting up dual monitors with fedora core 6: http://blog.taragana.com/index.php/archive/how-to-setup-dual-monitors-on-linux-fedora-core/

I haven't had to use duals monitors with Linux yet but if this doesn't work let me know and I'll run some tests as I can easily set this up at work (we use the same computers and similar cards).

Jan 12, 2009 | Dell OptiPlex GX280 PC Desktop

1 Answer

Configuration with windows xp


eash game sums offer controler suport sum dont ok one that do go in menu select losgitch gamepad should auto config it self for that game ok

Jan 23, 2008 | Logitech Dual Action for Pc (963292-0403:)...

1 Answer

Configuring gamecontroller


you have to configure the buttons, go to control panel>game controllers and yours should be listed, click on it and select properties, then you follow the button set up wizard, click ok, then it's configured.

Sep 10, 2007 | Logitech Dual Action for Pc (963292-0403:)...

Not finding what you are looking for?
Video Game Consoles & Games Logo

2,274 people viewed this question

Ask a Question

Usually answered in minutes!

Top XFX Video Game Consoles & Games Experts

James Wishart

Level 2 Expert

122 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Brad Brown

Level 3 Expert

16974 Answers

Are you a XFX Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...