Question about GE JASRM24912 Remote Control

1 Answer

Ge 4 device remote silver

How to i progam my remote to my tv my tv is insigina how to do i program it to fit my tv

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers
Re: ge 4 device remote silver

Universal remote codes change every year depending on what the most popular models are on the market. If you have tried "code search" and have been unable to lock-in a code for your device, this means a code for your model is not available in this remote. The memory chip in a universal remote can hold only a limited amount of information. There are no lists of models for each of the brands.

but here is a link to the code list universal remote codes and instructions

Posted on Jan 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Need to reprogram GE remote to Samsung tv

GE Universal Remote Codes ' Jasco
A version 2 through version 4 remote will have a "V2" to "V4" after the model number. ... Program your GE Universal Remote using the correct code list and ...

GE Universal Remote Codes and Instructions ' direcTutor
Direct Code Entry for GE remotes with 4 digit codes. 1. ... Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press ...

How to Program a Universal Remote - Frontier
Here's how to program universal remotes from RCA and GE: ... with whatever device you're currently attempting to program (i.e. the TV, the DVD player, etc.) ... If you havea V2, V3 or V4 remote and are programming a DVD player, press PLAY ...

How To Program A GE Universal Remote ' Codes For ...

Feb 03, 2016 | GE Remote Controls

1 Answer

GE 24929-V2 code for Element TV

Check the bellow link for to find the code GE V2 universal remote

GE 24929-V2

Feb 26, 2013 | GE Remote Control. 4-Device Universal...

1 Answer

I have a ge universal remote and have a toshiba tv dont know codes and how to programe it could you please help?

Which GE universal remote do you have? Does the remote use a 3-digit or a 4-digit code? To program most GE remotes for a TV, turn on the TV. Then press and hold the Code Search or Setup button until the indicator light comes on. Then press and release the TV button. Enter the first code available for your device. The indicator light should go off then check if the remote controls the functions of the TV. Repeat the above steps if the code doesn't work or doesn't control all the features of your TV.

The manuals and code lists for GE remotes are here: .

Toshiba 4-digit TV codes are: 0159 0178 0109 0120 0181
.............0105 0049 0095 0170 0260 0358
.............0394 0924 0012 0095 0117 0141
The 3-digit codes are 170, 181 or 641 for Toshiba HDTVs.

Please note that the remote probably only has codes for devices that were released 6 months or more before the remote was programmed. If your TV is newer than your GE universal remote, you may need a newer remote.

I hope this helps.

Cindy Wells

Jul 06, 2011 | RCA Remote Controls

1 Answer

Got a ge tv universal remote control...trying to get it to work on sanyo tv..had it work b4 but the person who helped do it isnt here...please help us

you did't spesify the model number of ypur remote . any way follow the steps to prgram your remote with your tv.

1.Manually turn on the device (TV, VCR, DVD, etc.) you wish to
2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.
4. Enter the three or four digit ( or three digit)code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.
5.Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.

code for your tv if the remote is 4 digit onep { margin-bottom: 0.21cm; }

0049, 0097 ,0110 ,0004

code for your tv if the remote is 3digit onep { margin-bottom: 0.21cm; }

004, 012, 013, 049, 097, 108, 110, 180, 209, 268


Feb 02, 2011 | GE Remote Controls

1 Answer

Unable to progam remote

1. turn on device 2. press setup (underneath on/off) till red light stays on the take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code

Mar 27, 2009 | GE JASRM24912 Remote Control

3 Answers

Will not progam

1. Turn on the device to be controlled
2. Press that devices button on the URC e.g. TV
3. Press and hold SET until LED blinks twice - then release SET.
4. Put in the code number supplied. The LED should blink twice.
5. Aim the URC at the device to be controlled (e.g. TV) and press power button once. Device should turn off. If not, repeat entire procdure trying each code number supplied.
Remember that there is some help available at

Feb 13, 2008 | One For All URC4220 Remote Control

3 Answers

I need a manual with the progamming codes for a Sanyo tv

I don't have a code book for you, but I can tell you how to program the RCR660 using the automatic programming feature.

Programming RCA model RCR660 (no code search button)

While following these instructions, keep the following in mind:

device = the component you wish to control with your remote (TV, DVD, VCR, etc.)

DEVICE = the button labeled for the component you wish to program

1. Turn on the device you wish to program.
2. Turn off all other devices in the general vicinity.
2. Press and hold DEVICE
3. While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device.
4. Release both buttons.
5. Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing.
6. If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off.
7. When the device turns off, press REVERSE, wait two seconds and continue doing this until the device turns back on.
8. To finish programming, press and hold STOP until the LED turns off.

Dec 22, 2007 | RCA RCR660 Remote Control

4 Answers

Lost code and instruction book?

Orion Codes: 035, 121, 135, 191, 394 Programming a GE Universal Remote Control takes about seven steps. Step One: Manually turn on the device you wish to program. Step Two: Press the Code Search button on the remote until the indicator light turns on. Step Three: Release the Code Search button. Step Four: Press and release the button for the device you are programming. Step Five: Enter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off. Step Six: Aim the remote at the device and press the power button. The device should turn off. Step Seven: Press Channel Up on the remote with the device on. If the device responds, no further programming is required. To look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator Website. Hope this helps, Good Luck :) Please Vote

Jul 10, 2007 | GE RM24911 Remote Control

Not finding what you are looking for?
GE JASRM24912 Remote Control Logo

1,466 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66451 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Peggy Cook
Peggy Cook

Level 1 Expert

7 Answers

Are you a GE Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides