Question about Dell PowerEdge 1800 Server

1 Answer

Same Problem Again - Mega Raid.... Unknown Error

Hello Dear,

I am using Dell Power Edger 1800 with Linux AS-3 ... i am copying here my error log messages here... Could you please help me to resolve this error... 3 Monhts ago; one HDD was demaged and i had replaced it...

Log is as under.....
Jan 21 14:16:01 localhost smbd[27854]: [2008/01/21 14:16:01, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 14:16:01 localhost smbd[27854]: read_socket_data: recv failure for 4. Error = No route to host
Jan 21 16:05:08 localhost smbd[12290]: [2008/01/21 16:05:08, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 16:05:08 localhost smbd[12290]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 21 18:03:30 localhost smbd[12616]: [2008/01/21 18:03:30, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 18:03:30 localhost smbd[12616]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 21 18:30:55 localhost smbd[12957]: [2008/01/21 18:30:55, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 18:30:55 localhost smbd[12957]: read_socket_data: recv failure for 4. Error = No route to host
Jan 21 18:47:22 localhost smbd[13045]: [2008/01/21 18:47:22, 0] lib/util_sock.c:get_socket_addr(919)
Jan 21 18:47:22 localhost smbd[13045]: getpeername failed. Error was Transport endpoint is not connected
Jan 21 18:47:22 localhost smbd[13045]: [2008/01/21 18:47:22, 0] lib/util_sock.c:get_socket_addr(919)
Jan 21 18:47:22 localhost smbd[13045]: getpeername failed. Error was Transport endpoint is not connected
Jan 21 18:47:22 localhost smbd[13045]: [2008/01/21 18:47:22, 0] lib/util_sock.c:write_socket_data(388)
Jan 21 18:47:22 localhost smbd[13045]: write_socket_data: write failure. Error = Connection reset by peer
Jan 21 18:47:22 localhost smbd[13045]: [2008/01/21 18:47:22, 0] lib/util_sock.c:write_socket(413)
Jan 21 18:47:22 localhost smbd[13045]: write_socket: Error writing 4 bytes to socket 5: ERRNO = Connection reset by peer
Jan 21 18:47:22 localhost smbd[13045]: [2008/01/21 18:47:22, 0] lib/util_sock.c:send_smb(585)
Jan 21 18:47:22 localhost smbd[13045]: Error writing 4 bytes to client. -1. (Connection reset by peer)
Jan 21 20:03:47 localhost smbd[13154]: [2008/01/21 20:03:47, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 20:03:47 localhost smbd[13154]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 21 20:10:56 localhost smbd[13236]: [2008/01/21 20:10:56, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 20:10:56 localhost smbd[13236]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 21 23:01:42 localhost smbd[13271]: [2008/01/21 23:01:42, 0] lib/util_sock.c:read_socket_data(342)
Jan 21 23:01:42 localhost smbd[13271]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 22 03:18:35 localhost smbd[13675]: [2008/01/22 03:18:35, 0] lib/util_sock.c:read_socket_data(342)
Jan 22 03:18:35 localhost smbd[13675]: read_socket_data: recv failure for 4. Error = No route to host
Jan 22 10:11:19 localhost smbd[14834]: [2008/01/22 10:11:19, 0] lib/util_sock.c:read_socket_data(342)
Jan 22 10:11:19 localhost smbd[14834]: read_socket_data: recv failure for 4. Error = No route to host
Jan 22 14:15:41 localhost smbd[15625]: [2008/01/22 14:15:40, 0] lib/util_sock.c:read_socket_data(342)
Jan 22 14:15:41 localhost smbd[15625]: read_socket_data: recv failure for 4. Error = No route to host
Jan 22 20:04:30 localhost smbd[17144]: [2008/01/22 20:04:30, 0] lib/util_sock.c:read_socket_data(342)
Jan 22 20:04:30 localhost smbd[17144]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 22 23:02:24 localhost smbd[17462]: [2008/01/22 23:02:24, 0] lib/util_sock.c:read_socket_data(342)
Jan 22 23:02:24 localhost smbd[17462]: read_socket_data: recv failure for 4. Error = Connection reset by peer

Jan 23 03:15:16 localhost smbd[17667]: [2008/01/23 03:15:16, 0] lib/util_sock.c:read_socket_data(342)
Jan 23 03:15:16 localhost smbd[17667]: read_socket_data: recv failure for 4. Error = No route to host
Jan 23 08:00:50 localhost smbd[18827]: [2008/01/23 08:00:50, 0] lib/util_sock.c:read_socket_data(342)
Jan 23 08:00:50 localhost smbd[18827]: read_socket_data: recv failure for 4. Error = Connection reset by peer
Jan 23 10:16:14 localhost smbd[18884]: [2008/01/23 10:16:14, 0] lib/util_sock.c:read_socket_data(342)
Jan 23 10:16:14 localhost smbd[18884]: read_socket_data: recv failure for 4. Error = Connection reset by peer

Jan 23 16:03:47 localhost syslogd 1.4.1: restart.


When i see the Server at last, last 4 or 5 messages were displayed on Screen and Machine was in hang position. I restart it then its solve....

Please help me to solve this matter. Please also give you email id so that i can get some help from you....


Thanks & Best Regards

Aleem Asghar
aleemasghar@yahoo.com

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 156 Answers

Hi

The title of your post suggests that you have "Maga RAID" errors. Maga RAID messages would be in line with issues on the LSI PERC sub-system.

However, the extract posted in your suggests network problems.

Any number of physical to driver and configuration issues can result in network problems.

Try the basic checks;
1. Change or try a known patch cable
2. Run "ping" test to a known good system connected to same network switch or direct connect with a "cross-over" cable and check for dropped connections.
3. Is the NIC and switch set to Auto-Negotiation or static at 10, 100 or 1000Mbps speed
4. Can you try another switch
5. Check and load correct or latest manufacture's drivers

Reply with more info.

Mike

Posted on Apr 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is poweredge 1800 display led connector


http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/Print?he Embedded System Management (ESM) log - also called System Event Log (SEL) or hardware log - reports potential hardware problems in Dell PowerEdge servers. Sometimes, simply turning off the server and disconnecting it from the electrical outlet will remove the error message. Wait approximately 10 seconds, and then reconnect the power cable and restart the server.

Other times, you will need to clear the ESM log to remove the error message. For instance, error code SEL FULLindicates that you will need to clear the ESM log. (You will lose the server's event history.) There are different ways to clear the ESM log.

To use DSET to Clear the ESM Log
  1. Download and open the DSET utility.
  2. Click the plus (+) next to System, and then click the plus (+) next to Logs.
  3. Click ESM to highlight it.
  4. Click Clear ESM Log located in the upper-right corner of the page.
To use OpenManage Server Administrator (OMSA) to clear the ESM log
  1. Start OpenManage Server Administrator (OMSA).
  2. Log in to OMSA by entering your username and password, and then press Enter.
  3. Click the Logs tab, and then click Hardware.
  4. Click Clear Log located next to Options.
To use Dell IT Assistant to clear the ESM log
  1. Start IT Assistant.
  2. From the middle System Tree bar, select your server by clicking it.
  3. Click the Logs tab, and then click Clear Log in the upper-right corner of the page.
Find your Dell PowerEdge server model in the chart below for other ways to clear the ESM log:

PowerEdge server model How to clear the ESM log 2300, 2400, 2450, 2500, 2500SC, 2550, 4300, 4350, 4400, 6300, 6350, 6400, 6450
Use the Log2Txt.exe utility to clear the ESM log:
  1. Start your server to the Log2Txt utility.
  2. When you see the ESM Log main menu appear, press 2 on your keyboard to select Clear ESM log.
  3. When the ESM Log main menu reappears, press 5on your keyboard to exit the utility.
1650, 1850, 1800, 2600, 2650, 2800, 4600, 6600, 6650, 7150, 6800, 6850, R900
Use the DRAC or ERA to clear the ESM log:
  1. Type the IP address of the Remote Access Controller (RAC) in the web browser address bar, and then press Enter.
  2. Log in to the RAC.
  3. Click the Logs tab, and then click Hardware.
  4. Click Clear Logs located in the upper-right corner of the page.
1850, 2800, 2850, 6800, 6850
Use the program BMCCFG.exe to clear the ESM logs:
  1. Download and extract the Dell OpenManage Deployment Toolkit here.
  2. Go to x:\Dell\Toolkit\Tools, where x is your primary hard disk drive.
  3. Copy the file BMCCFG.exe to a bootable floppy disk.
  4. Start the server from the bootable floppy disk.
  5. At the command prompt, type bmcc - clearsel, and then press Enter.
    The message "Clearing SEL" will display while the log clears.
1950, 2900, 2950, DP500, DP600, NF500, NF600
Use the BMC/BIOS to clear the ESM log:
  1. To open the BMC menu, press the Control + Ekeys during POST.
  2. From the list, select System Event Log, and then press Enter.
  3. Select Clear System Event Log, and then pressEnter.
=8590&doclang=EN

Jun 09, 2014 | Dell PowerEdge 1800 Server

Tip

PlayStation 3 ERROR CODES


Complete PS3 Error Codes:<br /> <br /> <br /> 0710102 - DNS Error; No DSN server available.<br /> <br /> 8013030 - System Error due to failed update download<br /> <br /> 80010001 - Major Error , Game ability stopped<br /> <br /> 80010006 - An error occurred during the start operation (corrupted folding install)<br /> <br /> 80010007 - An error occurred during the start operation (during disc swap tests)<br /> <br /> 8001000B - it happens when trying to establish wireless connection<br /> <br /> 80010017 - Can't start BlueRay Game<br /> <br /> 8001050B - Will not play demo hard drive games, (when blue-ray disc is inserted) - cause unknown<br /> <br /> 8001050D - An error during the start operation; Ps3 game swapped using the eject function and then play pressed quickly - ps3 game inserted again<br /> <br /> 8001050F - Hardware failure. Cannot update firmware or connect to internet.<br /> <br /> 80010510 - Will not play games installed on the hard drive<br /> <br /> 80010514 - Possibly reading blu-ray disc problem<br /> <br /> 80010516 - An error occurred during the start operation; Ps1 game swapped using the eject function and then play pressed quickly - ps1 game inserted again<br /> <br /> 80023101 - Unknown<br /> <br /> 80028E07 - which pops up when i try to update to 1.93 and says that i have been disconnected from the server<br /> <br /> 80028EA5 - User cannot connect to PS3 network<br /> <br /> 80028EA6 - Connection error , Possible Proxy error power cord. Then shut off your modem/router, for about 5 minutes, then turn the modem back up first and let it sync, then turn the router back on(if using one) and let it sync. Reconnect your power cable and flip the back switch up again. Then make a new network connection.<br /> <br /> 80028EA8 - Seems to mean unable to authorize isp account details<br /> <br /> 80028F10 - Go to Display Settings then HDMI (or whatever your connection is) and choose Automatic,<br /> <br /> 80028F17 - Ps2 disc Boot Error , An error occurred during the start operation; Ps2 game swapped using the eject function and then play pressed quickly - Backup ps2 game inserted again<br /> <br /> 80028F18 - Ps2 Disc Error, unsupported disc; eg. Utility discs, BB discs, IQ Remix game etc. ode).<br /> <br /> 80028F19 - PS2 Disc Error , fsck; the internal PS2 disk got corrupted and I guess that you can use HDD utility disc to fix it<br /> <br /> 80028F1A - Ps2 Disc Error , invalbnnetcfg; network config error<br /> <br /> 80029023 - Exchanging Key Information exchange has timed out<br /> <br /> 80029024 - "The attempt to obtain an IP address has timed out".<br /> <br /> 80029301 - An error occurred during the delete operation (attempting to delete some ps2 homebrew from virtual mem card)<br /> <br /> 80029501 - connection<br /> <br /> 80029509 - When the PSN network is down for maintenance.<br /> <br /> 80029513 - This content cannot be accessed on your account (80029513)<br /> <br /> 80029516 - Sign in to PLAYSTATION-Network (needed for some games or Ps3 processes - have to sign in to use them)<br /> <br /> 80029564 - Downloaded game will not install<br /> <br /> 80029751 - warhawk wont start but eveything else seems ok<br /> <br /> 80029945 - Can't playback burn BD movie<br /> <br /> 80029946 - Attempting to play burnt Dual layer NTSC disc on a PAL ps3 ( workarounds is to transfer files to ps3 via TVersity )<br /> <br /> 80029C68 - Corrupt data usually on external device<br /> <br /> 8002A10B. It shows up when I try to view my friends trophies, profile etc.<br /> <br /> 8002A10D - Unable to Add friend in XMB<br /> <br /> 8002A4A6 - Cannot load game to play online<br /> <br /> 8002A515 - Error Signing in<br /> <br /> 8002A524 - connection<br /> <br /> 8002A548 - Unable to remain logged in - either to game or server<br /> <br /> 8002A705 - Unable to connect to server/host. Check router port configuration.<br /> <br /> 8002AD23 - Unknown<br /> <br /> 8002AD3D - Cannot Log into PSN - Is the PSN down? Try manually configuring your PS3 IP info. Try disabling medai server connection in the PS3.<br /> <br /> 8002B241 - DVI has no audio.<br /> <br /> 8002B71A - Possible NAT Error , Can log onto Game Server but can't join game and can't host game<br /> <br /> 8002F994 - Too many people downloading the update (download it later on)<br /> <br /> 8002F997 - Can not update XMB firmware<br /> <br /> 80030001 - Deleting messages from inbox<br /> <br /> 8003041F - An error occurred during the copy operation (using media server)<br /> <br /> 80030517 - It seems to happen when you copy large media files.<br /> <br /> 8003051E - Game will not save<br /> <br /> 80030920 - An error occurred during the copy operation, the file may be corrupt or there isn't enough memory (Try copying data from original source)<br /> <br /> 80031150 - "Setting information is corrupted.Press the x button to repair and restore default"<br /> <br /> 80031601 - Error Creating Account<br /> <br /> 8013013D - "A connection error has occurred" - May be to do with the SSID of the Router or signal strength if the connection drops Putting the PS3 into DMZ may help - otherwise check WPA key Ps3 can't handle WPA2 only WPA or none<br /> <br /> 8013013D - connection<br /> <br /> 8013013E - WEP Key error, change WEP key to all numbers (on router homepage) and try agian, or which to WPA. - Otherwise disable security<br /> <br /> 80130203 - PS3 connects to internet but not to network - Typically means that the required ports are not open to connect to store but PS3 can connect to internet.<br /> <br /> 8013030F - Access Point not detected<br /> <br /> 8041040F - Communication with the server failed. A dsn error has occured.<br /> <br /> 80410418 - DNS Error<br /> <br /> 80410A0B - Internal PSP error, hardware fault. Send back to be replaced/fixed.<br /> <br /> 80710016 - Playstation Network is down.<br /> <br /> 80710092 - "An error has occurred. you've been signed out from the ps network" , "Media Server Error: A network error has occurred (80710092)"<br /> <br /> 80710101 - Connection error<br /> <br /> 80710102 - IP conflict , PS3 Cannot connect to the router with current IP information - Try rebooting your router<br /> <br /> 807101FF - An error occurred during communication with the server. This is a DNS error - This is a DNS error<br /> <br /> 8071053D - Hard boot the PS3, turn off the PS3 to stand-by, flip off the back switch and completely remove the power cord. Shut off your modem/router, for approx. 5 minutes, then turn the modem back up first and let it sync. Then turn the router back on (if you're using one) and let it sync. Reconnect your power cable and flip the back switch up again. Then make a new network connection<br /> <br /> 80710541 - The connection to the server timed out.<br /> <br /> 80710723 - Possible Port Error - Try opening ports , TCP port: 80, 443, 5223 and UDP port: 3478, 3479, 3658. or add Ps3 to DMZ<br /> <br /> 80710A06 - An error occurred during the install operation (error when downloading game from PSN - network error occured<br /> <br /> 80710B23 - PS3 Network is Down or PS3 Network is too busy to respond<br /> <br /> 80710D23 - Turn the PS3 off for approx. 30 minutes with the power toggle, not standby mode<br /> <br /> 81019002 - Error copying saves from location A to location B not open to connect to store but PS3 can connect to internet.

on Feb 06, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Dell power edge 2850 make 4 seconds beeps alarm without stopping and without show any error Msg on the screen.


I don't understand the beep code you describe, but the 2850 has many beep codes to help understand what is going on.

First ... Identify the beep. Does the beep start as soon as you power it on, or after several seconds? What is the pattern of the beep - is it a repeating set of beeps - 3 sets of beeps between 1 and 4 beeps ... like 1 beep-3 beeps-2 beeps, or 3 beeps, 3 beeps, 1 beep? Or is it a steady repeating beep - about once per second?

Second ... is the LCD panel on the server blue or orange? If orange, what is the error code(s) it is scrolling?

If it is a steady, once-per-second beep, it is probably your RAID controller. Does the system boot to Windows/OS ok? If so, use (or install) OpenManage Server Administrator (Managed Node from Dell's Support Site) to check the Hardware Logs and check the RAID array (under Storage/Virtual Disks). If it is not booting to the OS, then go into CTRL-M to see what the status of your array is.

Aug 16, 2010 | Dell 3.0 GHz Second Processor for...

1 Answer

It's Urgent


Hi,
when you boot the server there is a menu that comes up before the bios screen, enter that menu there you can know which raid level is being used.

Further Queries are welcome

Feb 26, 2009 | Dell PowerEdge 1800 Server

1 Answer

Valid operating systems fro Power Edge 1800


During the Windows XP setup you will need to provide the RAID driver using a pre-formated floppy disk.
Windows will ask you if you want to provide additional drivers and give you the key combination to use to do that.

Jan 21, 2009 | Dell PowerEdge 1800 Server

1 Answer

Dell 9150


This system has onboard RAID, sometimes it is simply because the RAID controller is in error, to get it out of error:

* Disconnect the power cable
* Hold power button for 15 seconds
* Release the power button
* Plug in power cable
* Start the computer

If this does not work, please provide information, is is Windows XP or Vista?

Dec 01, 2008 | Dell Dimension 8200 PC Desktop

1 Answer

Service Tag 277MW0j-DY


The best solution is to get another power supply and back the data up.

If you can't do that, and you have SCSI drives, then I would suggest marking the drives (0, 1, 2, 3, etc) and putting them in another Dell Power Edge server with the same RAID card and reading them that way. It can be dangerous to your data if you don't know what you are doing.

There are programs out there that can help you re-construct your RAID if needed. CaptainNemo and RAID Reconstructor have helped me in the past. If you have a Dell Perc 3/DI in your existing server, I may have the parameters for those programs.

Let me know.

Nov 13, 2008 | Dell PowerEdge 1800 Server

3 Answers

Dell server poweredge 1800 frequently shutdown


is there an error message that appears? can you check error logs? I need more information to be able to help you. I would first try to blow dust out of the fans, as it may be over heating, another possibility is that there is software on the machine that is causing it to shut down.

Mar 17, 2008 | Dell PowerEdge 1800 Server

10 Answers

Flashing orange light


Power edge system are having two power input check the cables from the power outlet may be one is in contact otherwise one of your power supply gone means not working. Check the wires first then the power supply units

Nov 26, 2007 | Dell PowerEdge 1800 Server

Not finding what you are looking for?
Dell PowerEdge 1800 Server Logo

1,133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...