Question about Jensen VM9510 Car DVD Player

1 Answer

DUEL XDVD700 Below is the resulted answer to the question of how to bypass the ebrake on the Duel XDVD700. I am not certain that this would be a legite solution and wonder if it would do more damage to my unit instead of producing the result desired. Please help., is this a viable solution? i got the xdvd700 by dual just yesterday. i figured it out! plug the ground wire(black) for the dvd player into the antenna while the antenna is still plugged in. then plug the yellow and blue wire into the recieving black ground wire. i did it and it works all the time no code, lost memory, no trippin, no BS!! email me for questions:

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The fix for the override on the dual described above is not recommended, unessassary and dangerous.

If anyone has the original thread please post the override question again and I can answer it.

On the IPOD classic question, your new IPOD 160 has a different firmware that will not be compatible with your dual model. The older one is compatible, IPOD had changed their firmware and only tv/dvd units / radios that were manufactured in 2008 will be compatible. So unless your unit is one of the new ones that is loaded with the new apple / IPOD firmware no NEW ipods will work on those devices. Call your manufacturer to get exact info. 1-866-382-5476

Posted on Feb 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i bypass the parking brake feature on my jensen vm9324

Bypassing the EBrake wire is not a good idea. Should you have an accident as a result of watching moving video in the view of the driver (illegal in ALL 50 states) your insurance company will NOT pay the claim. God forbid there is a fatality, then you are going to be charged with Manslaughter as a result of inproper equipment. Best bet is to connect the PINK wire to the vehicle's parking brake.

Mar 07, 2012 | Jensen Car Video Players

2 Answers


You do not need a bypass code. Pull out the stereo unit, take the parking brake wire and disconnect it from the parking brake sensor ground. Reconnect it to the radios ground wire and this will tell it that the vehicle is always in park and your videos will work while driving. It must be the stereos ground not just grounded to the frame or something. Must be a live source ground wire.

May 18, 2010 | Dual Electronics XDVD700 Car DVD Player

1 Answer

I have a xdvd700 dual and want to bypass the brake thing but no remote is there anyother way?

Usually there is a handbrake connection that needs to be grounded to the chassis in order to bypass the screen lock. I normally wire it though a switch to ground and back to the handbrake, so if the car is inspected it works like it should.

Some units feature a footbrake wire that needs to be pulsed as well. This is harder to override. I use a bypass device from Peripheral called the PAC-TR7.

Dec 06, 2009 | Dual Electronics XDVD700 Car DVD Player

1 Answer

Video bypass for dual xdvd700 without remote

i used a switch, to the ground, and i'm still having problems, so yeah lol

Jun 17, 2009 | Dual XDVD8181 Car Video Player

3 Answers

How do i bypass the emergency brake wire on a dual xdvd700

Its illegal to do but i have done it! You have to connect the brake wire to either the pos or neg wire! You need to find out which one it is thou, so attatch it to the negative first so you dont cause any damage if it doesnt work then connect it to the pos wire and it should work a treat for ya! I stress connect to neg first!!!!!!!!!!

Jun 13, 2008 | Jensen's VM9312 Car DVD Player

3 Answers

Need help on hooking up a xdvd700 dual without ebrake

i have the xdvd700 dual. my screen goes blank when it comes all the way up. is there a solution for that? or is that manufacture's problem?

Jan 30, 2008 | Car Video Players

10 Answers

Xdvd700 bypass code

How to get code xdvd 700 for dual model

Dec 27, 2007 | Jensen VM9510 Car DVD Player

3 Answers

Dual audio XDVD700

Try playing a DVD Press Stop Twice Enter 26604 Press Enter

Dec 21, 2007 | Car Video Players

12 Answers

How do i bypass the emergency brake wire on a dual xdvd700

Just ground out the Ebrake wire... it will work fine then. Even if you just link the ground and ebrake wire together and ground them together it works!

Dec 01, 2007 | JVC KD-AVX33 Car Video Player

19 Answers


The way you bypass the E Brake is you have to ground the wire to the radio sleev itself. There are two different peices. The radio itself and the sleeve that holds the radio in place. Take the yellow wire (the ebrake wire, not the yellow ignition wire) and open the metal connector up just slightly. Attach that wire to the top of the sleeve on 1 of the teeth located near the front of the unit. You have to make sure that the connection is good or it will not ground. Next slide the clear plastic over the wire so the only connection is with the tooth.
Then Insert a cd or dvd in the player. Press play on the remote and then push stop 2 X times on the remote. After you have done that press 26604 on the remaote and then press enter. This will permanently unlock the parking brake feature and allow you to watch dvds while in motion. If you need any further help you can eamial me.

Nov 19, 2007 | Jensen VM9510 Car DVD Player

Not finding what you are looking for?
Jensen VM9510 Car DVD Player Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Video Players Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

94198 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Jensen Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides