Question about Car Audio Receivers
i have a kenwood kdc-mp235 cd player in my car it plays and sounds great. my problem is when i tried to install my amp the sub woofer preout will not send to my amp.i tried diffrent a v wires and still the same problem i hooked the amp up to a friends car an it played find i also checked the subwoofers and they worked fine.can you guys please help me.
I assume the amp is turning on (lighting up) No audio may be due to Burnt rca ground trace in your kenwood radio. If you have a ohm meter measure continuity from rca's ground terminal to radio chassis. Should be close to zero resistance. If there is no no continuity there are fusible traces on radios main board that burn open at times when to much current is flowing thru rca ground
Just a good possibility , haver seen this happedmany times.
If you need service manual let me know email@example.com
Posted on Jan 26, 2008
Tips for a great answer:
Jan 02, 2013 | Kenwood KDC-MP235 CD Player
Mar 31, 2011 | Kenwood KDC-MP235 CD Player
Sep 27, 2010 | Kenwood KDC-MP235 CD Player
May 16, 2010 | Kenwood KDC-MP235 CD Player
Jul 26, 2009 | Kenwood KDC-MP235 CD Player
Mar 25, 2009 | Kenwood KDC-MP235 CD Player
Sep 11, 2008 | Kenwood KDC-MP235 CD Player
Feb 21, 2008 | Kenwood KDC-MP235 CD Player
355 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: