Question about Standard (CRT) Televisions

3 Answers

I cant get aux on my symphonic tv to play

How do i find the aux on my symphonic using my rca universal remote

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: i cant get aux on my symphonic tv to play

Ok so I just fixed the issue i had with AUX. Old trick I learned a while back. You will need an old vhs player hooked up to your TV set, set it to channel 3 or 4 and press play. Doing this will automatically convert the channel to AUX. You may stop the video and it will remain on AUX. Hope this helps, And hopefully some of you actually have an old vhs player lying around.

Posted on Jan 27, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: i cant get aux on my symphonic tv to play

@Demitra, under the numbers there is a blue button on the right side that says TV/VCR, it is considered your "Game" button that was on the original symphonic remote.

@lawsonrox, Don't know that there is a way, just pick up the RCA remote, you can get it for about 5 dollars.

Posted on Jun 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers
Re: i cant get aux on my symphonic tv to play

Try Channel down from 2 or up from 99.......T.

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

G25819TK RCA tv (1991) aux jack problem

Without looking further you may need the Factory remote not all functions may be accessable using a "Universal" Ha,Ha,Ha remote.These Universal remotes have been problems in my line of work for years,Best idea is when you get a new tv pick up a cheap basic functions remote & use it for everday normal Vol./Channel/Power et. & keep the orig.for things the universal won't do

Jul 28, 2013 | RCA Standard (CRT) Televisions

1 Answer

Cant find auxillary channel

You will need a connection to an aux,a VCR, DVD etc. The TV will recognize and display. You may need an original RCA TV remote with an aux button. RCA universal remotes will also sometimes have this. Or in this case press your remote button to 00. Sometimes this will work, or press channel search while playing an aux device, Thanks for listening, Sincerely, Matt.

Feb 28, 2013 | GE 35GT695 TV

1 Answer

Tv aux channel issues

youll have to use the original remote to be able to do that still. always keep the original tv remote because of those issues.

Jun 02, 2010 | Symphonic ST420FF 20" TV

3 Answers

Durabrand TV stuck on AUX mode

You can program a Comcast remote to work with the TV. Press the "TV" button on the Comcast remote. Then, hold down the "Setup" button until the red light blinks 3 times. Enter a 5 digit code:
These are the Durabrand codes: 10171 10463 10180 10178 11034
The 10171 code worked for my Durabrand DWT1905. Then use the TV/VCR button located beneath the "7" to switch inputs.

Jul 30, 2009 | Durabrand DWT1905 TV

1 Answer

No Aux Channel but I have the yellow and White plugs in the front!

Certain Universal remotes have extra menu and input buttons. Take a look around and see what you can find.

Apr 24, 2008 | Orion STV2763 27" TV

4 Answers

Video mode

I went to add/delete channels in my menu on my symphonic and it let me scroll through the channels, make sure you have them all set to add (by pushing the volume buttons to make them light blue instead of purple)....after adding all of your channels (or just the one if you use dish) just power the tv off while on a channel and then power back on and you should have tv.

Jan 12, 2008 | Symphonic ST419E TV

3 Answers

Whats the tv remote code if i have a direct tv + remote.

The Directv remote isn't capable of fully emulating the native remote of the Symphonic Combo. You can get limited functionality though.

1. Move Remote slider to "AV1" position.
2. Hold down mute and select until you get 2 flashes of the green light, then release both keys.
3. Enter 20821 and observe 2 more flashes of the green light.

Next lock the volume controls to this device.

4. If you have moved the remote's slider from the AV1 position, move it back. The slider should remain on AV1.
5. Hold down mute and select until you get 2 flashes then release both keys.
6. Enter 993 and observe 2 flashes.
7. Press and release THE SELECT KEY and observe 2 more flashes.

You can control the TV's power using the big power button under the device selector.

Oct 23, 2007 | Symphonic WF20D4 TV

6 Answers

Can't get TV onto the AUX channel

You can purchase an RCA universal remote that will let you access the A-V inputs. These only cost about $10.00 or so. Stargazer

Sep 09, 2007 | RCA F25254GY 25" TV

1 Answer

Universal remotes

You have to use the input selection button. Example like video, video1 video2, aux etc...

Sep 01, 2007 | Symphonic ST419E TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

1,315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66444 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides