Question about Sub-Zero 632 / S

1 Answer

Sub Zero 700 CT problem

My sub zero is also not producing ice. 2 notables. The machine was off for a period of time (15 days) and the condo complex it resides in has experienced some water quality issues. Is there a defrost bulb on this model? and is there a filter that may be clogged? -Chris

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 90 Answers

I am guessing yes on both. Make sure you have water running to the unit. Follow the water line and it should lead to a filter. You stated the unit was off. Was the power to the unit removed? If the unit was on but the water was on it could have burned out the water valve solinoid. This is the unit that the main water line runs into from the source... Start there and get back to me...

Posted on Feb 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sub Zero 700 suddenly stops after 12 years. Compresser is burning hot.


The compressor will normally be 100 to 110 degrees. I would suspect the thermostat or mouse damage in the freezer area. Also, if you keep it overstocked, to the point of poor air circulation, you could just have ice blockage. Put the frozen food in a styrofoam cooler or a good heavy corrugated box and give the unit a good full defrosting.

Dec 15, 2012 | Sub-Zero 700 Refrigerator Freezer...

1 Answer

I have sub-zero model 3211 red. My ice maker stop making ice. what to i do?


Hello,
Here is a link to a Sub Zero Repair Video
http://www.appliancerepairlesson.com/shop/refrigerator/sub-zero-diy-repair-video-for-replacing-ice-maker/

Feb 20, 2011 | Sub-Zero Refrigerators

1 Answer

The freeszer door on my Sub Zero does't have suction anymore


what is the mod num> 650, 700? no a lot help. check the freeze inside the upper part for any ice build up

Apr 02, 2010 | Sub-Zero Bottom Freezer Refrigerator

1 Answer

Ice making for sub zero 48


The sub zero should make ice soon after being installed. If there is ice around the door frame of the freezer there may be a problem with the door frame heaters. There should not be ice around the door frame.

Nov 09, 2009 | Sub-Zero 661/F Side by Side Refrigerator

1 Answer

Sub zero 700 TR error code 06


Error code six means: from SZ
Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
Erratic temp can be many things such as an open door. Clear the code by holding the bell key for 15-30 seconds or until you hear a tone. Keep an eye on your temps for a couple of days. If it comes back its time to call a service tech. If you are in OC I have the number of the best tech for Sub Zero in all of SoCal. There is more tests that can be done depending on how tech savvy you are.

Jan 21, 2009 | Sub-Zero 700TR

1 Answer

Sub zero fridge


water filter maybe too dirty

Jul 05, 2008 | Sub-Zero Refrigerators

1 Answer

Sub-zero 632 error code 24


clean out auger bucket ec-24 is defrost underheat,to clear press and hold bell on/off key for 15 seconds.

ALL APPLIANCE REPAIR L.L.C
HOT SPRINGS

Feb 28, 2008 | Sub-Zero 632 / S

4 Answers

Sub zero 532 ice maker


When my repair tech came out, he showed me that the fill tube sometimes retracts toward the rear of the freezer. He simply pulled it forward with a pair of needle nose pliers until it rested in the delivery reservoir. This placement allows the detector to know when the tray is full and shut off; thus not overfilling the freezing tray and/or splashing additional water onto the freezer wall and into the ice cube drawer.

Nov 21, 2007 | Sub-Zero 632 / S

1 Answer

Sub Zero Frezzer drawer


I had the same problem. I found the piece of plastic in the ice tray and couldn't figure how to put it back. I ordered a new ice flapper from the parts place on the internet and installed it. The ice maker now shuts off. Good Luck.

Rick S.

Oct 26, 2007 | Sub-Zero 650 / O Bottom Freezer...

Not finding what you are looking for?
Sub-Zero 632 / S Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sub-Zero Refrigerators Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Sal De

Level 3 Expert

2699 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Sub-Zero Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...