Question about Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Changing door hinge position

I tried to swap the cupboard door hinge positions on the front of my Zanussi ZJD1219 integrated washing washine. I started with the magnet and I removed all of the screws. Unfortunately I should not have removed the bottom screw as it held on a piece of metal inside the front casing used to fix on the magnet (and indeed the other hinges). The piece of metal fell to the bottom of the machine.

How do I get access inside the front of the machine to retreive this peice of metal and put it back on?

Thanks in advance.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 236 Answers
Re: Changing door hinge position

You could try and pop off the door seal from the w/m front and reach down to see if retrieval is possible.

Posted on Feb 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Drum noisy when in high speed spin

Problem for Zanussi ZJD1219 Front Load All-in-One Washer / Dryer How do i change the main bearing please?

Feb 02, 2010 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Zanussi ZJD1219 Washer/Dryer - noisy spin and dirty spots

Sounds like the main drum bearings have failed, and the marks on clothes are probably grease spots from the main bearings.
It is quite an involved repair, and not one that I would recommend you tackle yourself unless you are competent to do so,as it really is involved.
Please rate my solution.

Nov 15, 2009 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

After wash there is terrible smell. have cleaned filter and powder tray.could there be residue somewhere

front load washers are known for foul odors, There are many products available to eliminate these odors. Affresh and smellywasher are two products for removing the odor

Nov 10, 2009 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Zanussi ZJD1219 Not Drying

check safety overheat button due to faulty stat or blocked vent,burnt element connections,blown element hope this helps

Apr 07, 2009 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Zanussi nexus FL 1081

Sounds like your water pipes are on the wrong way round so its rinsing in hot water.

Nov 07, 2008 | Zanussi FJS1225W Front Load Washer

1 Answer

Zanussi zjd1219


Machine is showing E40 ERROR

Sep 07, 2008 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Zanussi Front loader washing machine

is the door loose( up/down movement) could be hinge problem,or the door lock may need replacing.

Mar 20, 2008 | Washing Machines

1 Answer

Replacement cabinet door hinge

search internet any zaussi dealer will order it for you.

Jan 22, 2008 | Zanussi ZJ1217 Front Load Washer

Not finding what you are looking for?
Zanussi ZJD1219 Front Load Washer / Dryer Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides