Set time and date

To Change the date

Hit "Feature" 0,0
then hit left intercom button 2 times
then type #101
type in date ex 102508
they hit "Feature" 0,0

To change the date and time on the Merlin MLX-20L:
press menu
press System Program
Press Exit
Press System
Press Time
Enter the time
Press Enter
Press Exit
Press Home to exit programming mode

To change the Date:
Press Menu
then System Program
then Exit
then System
then Date
Enter date
then Enter
then Exit
press Home to exit programming mode

I downloaded and printed the Users Manual and there was NOTHING this clear and concise in the manual....
spent 40 minutes searching the internet to find this solution!

and it's so easy...that I now I feel like so ******

I had a wonderful time searching online for the same solution, without any success. All I did was call myself from a different phone line and the date and time changed automatically!

Hope this works for you!

Terry

Press 'Prog' then press star key twice, then enter '1234', then enter '000', will get you to Date & Time Set, then press 'enter' button (bottom right hand corner of phone), this will then allow you to change the date and time accordingly.
Hope all goes well

hit the feature button (gray, looks like a globe on it) under the display, under the 3 gray buttons in a row.
then **8463
password is 23646
follow prompts :)
hit the hang up (phone with arrow underneath) when fone.

feature
00
*phone lights up
left intercom
left intercom
*system program* (onscreen)
#101 for date
#103 for time

You can only change the time on the primary phone in the system. You need to find out which one that is and change it on that one and the rest should change. Or just try it on all the phones connected to the system. It will work on one. Then that's it.

Samsung Digital phone systems... including DCS, DCS Compact, DCS 50si, DCS 400si, iDCS 500, iDCS 100, DS 616 And Samsung Voice mail systems... including SVMi-4, SVMi-8, and Cadence.
This is a multi-step process which involves entering administrator level programming and then setting the date and time. Programming can only be done from a 12 or 24 button display telephone.

1. With your handset on-hook, press TRSF and then dial 200. Your display then shows ENABLE CUS. PROG. PASSCODE:
2. Dial your 4-digit pass code 1234 (which is the default pass code). The display then shows ENABLE CUS. PROG. DISABLE. If the pass code 1234 does not work as stated, please see Samsung DCS Notes below.
3. Dial 1 to enable. The display now shows ENABLE CUS. PROG. ENABLE.
4. Press TRSF and the keyset will return to its idle condition. Once you have entered administrative level programming, you must begin programming within 30 seconds. Any delay of more than 30 seconds between keystrokes will cause the system to automatically exit the programming mode.
5. Next enter the new date and time as follows:
   Press TRSF and then dial 505. The display then shows the current date and time setting on your system. The example below shows Monday, April 7, 2003, 9:30 AM.
6. OLD: 0 04 07 03 : 09 30
   NEW:WMMDDYY:HHMM.
7. Enter the correct date using the dial pad as follows:
   W= Day of the week (0-6; Week begins on Monday and ends on Sunday)
   MM= Month (01-12)
   DD= Day of the month (01-31)
   YY= Last two digits of the year (01)
   HH= Hour (Use 24 hour clock and enter the range of 00-23)
   MM= Minutes (00-59)
   Press TRSF to store and exit programming. If you have entered invalid data, you will receive an INVALID ENTRY message for three seconds. Reenter the date and time.

change time of day

Have a comdial 5 phone system and no instructions in the manual on how to change the time in the display?

Remove the batteries, and the power cord, wait for the LCD screen to go blank. Re-insert the batteries, as soon as you put in the last battery, look at the LCD screen. You will see a display massage. Hit the up/dn arrow on the round key which say Del. -- Dial/Opt until you see set time. Use this same key to set the time and date. Hope this help you.

http://www.also.com/panasonictimechange.htm

This has step by step instructions. Good luck!