Question about Belkin (F5D5231-4) Router

1 Answer

Router Settings I can't access some internet pages so if anyone knows their router settings please post here or contact me on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers
Re: Router Settings

Please check the IP address of your DNS on your ISP

Posted on Jan 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I am using 3g wireless router buyed from wifi digisol company. can anyone please help me to tell is this product is right for internet communication. for more details related to this product visit htt


Using 3g wireless Linksys Routers is best router you use for inter net connection,

For customers using the AT&T 3G MicroCell and a Linksys / Cisco router model WRT54G2 or equivalent, the following settings should be made to the router.

NOTE: Changing the broadband router / modem / gateway settings may cause other applications to stop working, and / or change the broadband router security settings for outbound data transmissions. Please see the router / modem / gateway instruction manual for more detailed information.

1.Open Internet Explorer and navigate to the router setup page at

2.Enter the User name and Password, click OK

3.Verify the following settings:

Automatic Configuration - DHCP
MTU: Auto
Size: 1492
Select the Security tab, verify IPSec Pass through is set to Enable


5.Click Save Settings


I Hope Your Router Linksys Routers Problem Is resolved By now:

In case you need online Linksys Routers help then follow us on for:

Linksys Router Support

Apr 02, 2014 | Linksys Routers

1 Answer

I want to connect my Xbox 1 to the Internet so it can work but don't know how!? My only source of Internet is my sprint router net gear air card! Does anyone know how to connect an Xbox 1 to a sprint...

Yes, it should be easy to connect your Xbox One to the internet.

Assuming your Netgear router is wi-fi capable, go to Network settings on the Xbox One. This will display Network status - wireless settings - etc. Follow the setup procedure here:
Network settings on Xbox One

Feb 26, 2014 | Routers

2 Answers

How do I set up passwords


Welcome to Fixya. If you need the secure the router you need to access the Wireless Settings Page.

To access the router page just open a browser then type, the Default username is blank and the password is admin. Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Wep Key. The Network Key or Wep Key serves as a password or security code on your network to make it secure.

If you have questions please let me know. Thanks for using Fixya

Mar 08, 2011 | Linksys Wireless-G WRT54G Router

2 Answers

We live in France. Use live box for Internet. Can we change to net gear router?

Yes you can change it with netgear router. For that configure your router with below method. You need to configure your router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. or or or If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then set WAN settings as internet service provider settings enable DHCP. .Click on wireless and enabled it. Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 17, 2011 | Routers

3 Answers

Need to change my password how do i do that?


Welcome to Fixya. If you want Password on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access your router you need to use a computer that is connected to it. Open a Browser then type or The Default username is admin and the password is password. Password is case sensitive.

Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure.

Thanks for using Fixya.

Feb 14, 2011 | NetGear WGT624 Wireless Router

2 Answers

How to set my wireless into private ?


You can make the network secure putting a password with it. You need to access the Wireless Settings Page of the router. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type, the Default username is admin and the password is password. Go to the Wireless Settings Page, Under Wireless Security Mode you can select either WEP,WPA or WPA2. Then Personalize your Network Key. The Network Key serves as a password on your network to make it secure.

If this works dont forget to say thanks. Thanks for using Fixya.

Feb 03, 2011 | NetGear WGR614 Wireless Router

1 Answer

Do not know know password for wireless internet

Go here and download the manual
You will need to reset the router or change the password in the router 1. To change the password, goto Internet Explorer 2. In the address bar type 3. Press enter key 4. YOu should see a box with username and password fields. 5. username is admin 6.password is password 7. These are not the wireless passwords but the access password to get in the router. 8. Once in the router interface on Internet Explorer; goto the wireless sections and change the password there.
To reset the router WARNING: This will reset all the settings to what it was like when it came fresh out of the box. You may need to know some other settings. Restoring the Default Password and Configuration Settings You can restore the factory default configuration settings that reset the router's user name to admin, the password to password, and the IP address to To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 5 seconds, until the Power light begins to blink (see "Back Panel" on page 5). 2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.
Failing this, please refer to the manual, page 29 onwards
All the best now

Dec 17, 2010 | NetGear WNR2000 Wireless Router

1 Answer

Lost vpi and vci settings, do i need to contact isp for this or not?

Well normally, you need not contact ISP as the router will pick it up automatically. If it does not then you need to contact your ISP to get the values. Perform the below steps to configure the router:
1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).  2. Connect the computer to the router using any one of the 4 available ports.  3. Open the browser(Internet Explorer or Mozilla Firefox).  4. Access the router (usually  5. Login to the router (Username = admin Password = password unless you have changed it).  6. Click 'setup wizard'(at the top of list) from left menu.  7. Select yes and click next.  8. It should give you a "PPPoA Detected" and then click next.  9. Enter the login and Password of ISP click apply.  10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).  11. Click on connect button.  12. Connecting to server should show 'connected'.  13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.  14. Open up another browser window and try to access internet. 
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards Anand

Feb 16, 2010 | NetGear DG834G Router

1 Answer

Belkin N1 Vision - unable to see networked printers

Go on the main PC and Press Start, Control Panel, Printers and Faxes, Right-Click On The Printer You Want To Share, Properties, Sharing...

... If it comes up ( If it doesn't skip to the next part )...
49a8fc3.jpg ... Click on "If you understand the security risks but..."
Click On...
Click Share this Printer, Apply, Ok. Now look on your laptop for network places and you will see the printer on the network.

If you need to contact me email

Jan 21, 2008 | Belkin (F5D5231-4) Router

1 Answer

Wireless not working with the router

k once u log in to router u need to click on w/l settings and

Wireless Settings   Wireless Network Name (SSID): Region: --- Select Region --- Africa Asia Australia Canada Europe France Israel Japan Mexico South America United States Channel: 01 02 03 04 05 06 07 08 09 10 11   Wireless Access Point Enable Wireless Access Point Allow Broadcast of Name (SSID)   Wireless Card Access List   Security Encryption (WEP) Authentication Type: Automatic Open System Shared Key Encryption Strength: Disable 64bit 128bit   Security Encryption (WEP) Key Passphrase:   Key 1: Key 2: Key 3: Key 4:  

and if u want security password type any 10 digit no which u can easily remember one>and click apply do not hit generate>rate me solved if its helps

Oct 16, 2007 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Belkin (F5D5231-4) Router Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts


Level 3 Expert

18259 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides