Question about FAIP Garden

2 Answers

Where can I get seal rings and o rings for my pressure washer pump without buying an entire seal kit? Faip 193490.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 106 Answers

Hello,

Alot of people have tried doing this as the genuine o-ring and seal kits are so expensive and sometimes hard to source, but many companies make orings and seals that are unique and cannot be found aftermarket,
If you are lucky you may find some but the only way of doing so would be to take the actual seal and orings down to your local bearing and seal supplier and they will measure it up and do their best to find some for you...

Regards
Brad

Posted on Jan 02, 2010

  •  Bob Oppenheimer
    Bob Oppenheimer Oct 12, 2013

    MSC industrial www.mscdirect.com sells metric O-rings by the bag. If you measure what you've got, you can make an educated guess what to replace with

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 13 Answers

MSC industrial www.mscdirect.com sells metric O-rings by the bag. If you measure what you've got, you can make an educated guess what to replace with.

Posted on Oct 12, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced water seals and now i have an oil leak. however i have good pressure


I don,t nothing by the brand of this pressure washe but i think there is also a large round oil seal is maybe broken or is not good or ring is not in his seat. but a cuff-kit has most times has not the 3 oil seals on the pump cover under the brass pumphouse this are the first rings simmer rings but before you have no problems with oil leak , are they not forget ? look carefully on the image of the cuff-kit or on the site of the brands models spares . if the brass pumphouse was released then you have replace the 3 simmer rings oil seals yet.

Oct 03, 2015 | Annovi Reverberi AR SJV2.5G27D-F7 Pressure...

1 Answer

What kind of pump oil


What you have is a generic pump from china more than likely. Its built along the line of a FAIP pump. They arent supposed to have the oil changed in them at all. Most are sealed pumps but may have a plastic plug in it. If you must replace the oil then I would suggest Pressure washer parts catalog quick links Pressure Washers High Pressure... and get this item 4.5 OZ. AR64545 OIL FOR AXIAL PUMPS. It is recommended for pumps built similarly but not for your specific pump. But it should work. Good luck. W

Feb 21, 2015 | Simpson MSV3025-S Megashot 3000 PSI Honda...

1 Answer

Ball valve spring pressure washer detergent line


Not sure what type pump you have but you can buy a chem. injector rebuild kit at Pressure washer parts catalog quick links Pressure Washers High Pressure...
If you need to replace the spring then replace the entire kit. Ball, spring and oring. Most pumps that come on the newer TRoy bilts are AR RMW pumps. the parts diagram can be found here at http://www.arnorthamerica.com/manuals/rmw-om%201006.pdf
The parts for a AR chem. injector are
480480 O-Ring
1250280 Ball
1560520 Spring
Good luck

Jul 22, 2014 | Troy-Bilt 020528 Gas Pressure Washer

2 Answers

Power washer not spraying hard


Hi Mike
You could have one are two problems with the pressure washer.
1...pump for pressure washer worn and needs washer/seal replacement.
2...Need to adjust the pressure discharge relief valve to the needed pressure.
Please take time to rate me
Bud

Mar 28, 2013 | FAIP Powerwasher Universal Pressure Washer...

1 Answer

020209 pressure washer has no pressure


Your water inlet may be stopped up. Whether this model only has a screened hose washer or a better filter, pay special attention to that. Be sure the pathway is free and clear.

Take each of poppet valves and while pushing (with a pencil or something) on the part that moves up and the spring pushes it back down - with magnification and lots of light, be sure there isn't a small piece of debris affecting one of those valves. Its easy to miss, so look very closely.

Next, remove the hose from the pump. We are by-passing the entire unit that includes pressure hose, trigger gun, lance, spray nozzle. If it seems to pump a lot of water out of the pump--then the problem is most likely the trigger gun is clogged or the pressure nozzle is clogged. Some trigger guns can be taken apart -- some, not so much. Same with nozzles.

I hope this helps you, Randell. If yes, please take a sec to rate me. Thanks!
Don

Mar 23, 2012 | FAIP Garden

1 Answer

Good evning. the problem with my washer is. the pump pulsates when trigger is released. I have a good pressure supply to the unit . help please.


it sounds like the seals in the pump are worn out.if you can purchase a replacement seal & o'ring kit you can do it yourself.get the model number and buy the kit to suit.dis asssemble the pump and replace the o'rings & seals.assemble pump and test.

Jan 19, 2011 | Karcher Garden

1 Answer

What type of oil is used to fill the a FAIP PV93501 pump and what quanity.


I don't know about that brand of power washer.
We used several types of power washers over the years, and they each called for 20 or 30 weight non-detergent oil in the pump. SAE 20 or SAE 30

The pump oil comes about half way up inside the pump.

The engine oil is 10W30

48f7ea8.jpg

Do not turn a power washer on its side or upside down or oil will run into carburetor.

Oct 14, 2010 | FAIP 2100psi 2gpm Faip Power Pressure...

1 Answer

No pressure in power washer.


usually you can get a seal kit for your pump. I would need the model number to direct you to the parts you need.

Sep 03, 2009 | Garden

1 Answer

Where can i find pump rebuild kit for simpson pressure washer? i need o rings and seals


Hi,

There are so many sites like ebay etc..

The best one is :-

http://www.pressurewashersupplies.com/

Check and let me know, if doesn't find the kit.

Thanks for using "Fixya".

Jun 23, 2009 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

876 people viewed this question

Ask a Question

Usually answered in minutes!

Top FAIP Garden Experts

roeb

Level 3 Expert

813 Answers

john h

Level 3 Expert

21811 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Are you a FAIP Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...