Question about GE WBVH6240F Front Load Washer

3 Answers



Posted by on

  • 2 more comments 
  • Anonymous Mar 20, 2008

    I hate this washer.

  • Scott Tankersley May 26, 2008

    Have a ge washer that leaks out the front. It acts like the seal is not sealing with the door. Model no. wbvh6240fww

  • Anonymous Jun 01, 2008

    the rubber sealant has tear in it

  • Coach Andy Jun 13, 2008

    Our 5 yr old whirlpool washer had water filled in the drip pan, over flowed and seep through floor board. We have a dry wall mess now on the second floor. QUESTION: Obviously the drip pan is there for a reason, ours had separated from the drain pipe it was connected to. Would normal "drippage" cause that much over flow???



3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Hey guys and girls. I found the problem the soap dispenser tube popped out of the gasket and was leaking behind the gasket and running down the front. It was pretty easy to take apart the unit. I can also offer this tip. Cut the hose off of the soap dispenser piece.
Pull the tube through the hole in the gasket and reinstall the soap dispenser and carefully pull the hose back to re-seat the soap dispenser.

Posted on May 29, 2008


Check your door boot, ours is doing the same thing. Found out there's a huge hole in the door boot seal.

Posted on May 29, 2008


Try onscrewing top panel on machine...when machine agitaes strongly a hose my pop lose up from top.

Posted on Feb 18, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Kenmore Washer only leaking from one area

Ive never worked on a Kenmore but it may just be the overflow outlet. All washing machines have an overflow which will dump water out from the top of the tub if it overfills but sometimes on high fill water level, clothes can splash around and cause a "wave" of water to splash out over the overflow outlet. Check to see if the leak only occurs when you have selected high level fill.

Nov 23, 2017 | Kenmore Energy Star 44092 Front Load...

2 Answers

Hoover Dishwasher HD95M leaks on start up from bottom right front corner. Leaks when initially being fed from water feed.

Water leaking can be poor plumbing or fault in the inlet hose connection. You are the first observer and so your view on the leak area is important as the leak can be from the hose, from the inlet, the hose or the washer unit.
Based on this the water leak can be plugged, tighten the hose clips, check the inlet filter or check the washer's feed line.

Feb 09, 2011 | Hoover HD95M Free-standing Dishwasher

1 Answer

I have a leak at the front bottom of my lg front load washer

this most likely is coming from the pump assembly which is located on the front... make sure the clean out filter lid is tight and nothing is leaking from there... make sure you have no tears in the door liner /rubber boot... your going to have to gain access to inside of unit to inspect and see where exactly the water is coming from could even be comning from one of the hoses that go to your dispenser area as water does go through there during operation..... good luck to you....

Jan 03, 2011 | LG WM-2277HW Front Load Washer

1 Answer

Water leaking from front right corner - not hoses

The leak is coming from the area of the drain pump, but you will need to remove the lower toe panel directly below the door to sufficiently inspect where the leak may be coming from. The access screws are located under the bottom front edge of the panel. With the screws removed, the panel will drop down, then come off. The following link explains what to look for:

Make sure you check all hose connections on the drain pump and make sure the drain pump reservior cap (if equipped) is on tight. If you have any questions, please post back with your MODEL NUMBER and let me know. I hope this helps you.

Apr 05, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Haier Washer/Dryer HWD1000 water leak from the bottom. When I turn the machine on, it starts taking water in, and then I see water leaking from the bottom..I checked the connection hoses, the door(front...

Check the button trap. Little door at front bottom right corner. There is a big screw in plug that has to be closed very tightly. Also check the plug gasket is clean.

Apr 01, 2010 | Haier HWD1000

2 Answers

Maytag atlantis washer got water leaking from

I have an Atlantis myself. There can be several problems. Did you check that the fill hoses in the back are not leaking? Are they tight? There are hoses inside the washer and a pump near the front. I replaced my pump last year and I,m getting ready to replace the thrust bearing assembly (spin issues). Does the washer leak with every load? make sure water is not splashing over the tub when filling. The front panel comes off if you can and leave off and watch to see where water is coming from.

Feb 17, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Kitchenaid topload washer about 3 yrs old, started leaking from bottom, front. Checked hoses at faucet and washer, all tight no leaks there. Seem to be coming from under the front lower lip of washer.

it's the pump. release the control panel and flip back on hinges. pop the retainer clips and unplug the lid switch harness on top. pull entire white part of cabinet back and up..pump is front center.

Jun 14, 2009 | KitchenAid KAWS750L Top Load Washer

1 Answer

Leaking water

Your pump is leaking. it is attached to the front of the motor. Very common. Pump retails around $60.

Part number is 3363394

May 19, 2009 | Kenmore Washing Machines

Not finding what you are looking for?
GE WBVH6240F Front Load Washer Logo

952 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides