Question about Motorola Mobility DRC800 Universal Remote Control

2 Answers

Need updated codes for RCA RCR860 remote control

I have been unable to program my tv to any universal remote as well as the directv remote control. I have purchased 3 different remotes and nothing works Help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers
Re: Need updated codes for RCA RCR860 remote control

If this is the post about the RCA remote and the Emerson TV, try 189. I have found the Emersons are NOT easy to program using universal remotes. I happened to stumble across the 189 code by accident and it works for the one Emerson (analog, 20" flatscreen) TV, but not an older model nor any of the Emerson VCRs that I used to won.

Posted on Mar 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Need updated codes for RCA RCR860 remote control

I have a Phillips TV and need the code for that. I have the manual but it only lists RCA, Sony, JVC, Panasonic, Toshiba, and Sharp.

Posted on Apr 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

DirecTV remote won't work with my new RCA TV

yes go into kitchen open bin drop in these remotes are not meant for our tv/dvd/sat etc they are for a chinese system save your hair chuck it away sorry to say I got one of these oh dear !!!!!!!! you would be better getting a sky type copy remote from the two pound shop I did works great

May 05, 2010 | Universal Remote Control DIRECTV Universal...


Why Am I Unable To Program The RCA Remote Control To Operate My Components

Why am I unable to program the RCA remote control to operate a component? Why am I unable to program the RCA remote control to operate a component? If you are unable to program the remote control to operate a component, review the following information:

If none of the programming procedures work, the universal remote control may not be compatible with your components, based on the type of infrared technology and the age of the components. Some RCA universal remote controls will only work with components manufactured after 1990.

If you are testing the remote control after you have entered a code, you may be too far away from the component or you may not have the remote control aimed directly at the component. Because the remote control uses infrared (IR) technology to communicate with components, there must be an unobstructed path between the remote control and the IR sensor on the component.

Code Entry Methods
If the Direct Code Entry method was used to enter the codes for your brand and the unit is still not functioning properly, try one of the automatic code search methods instead. During automatic code search, the remote searches for the correct code to program.

For the remote control to know which component you wish to operate, you must put the remote control in the correct mode by pressing the corresponding component button.

Combo Units
To program the remote control to operate combo units, such as TV/VCR’s, TV/DVD’s, or TV/VCR/DVD’s, use the combo codes in the Code List to program the individual corresponding component buttons. Once programmed successfully, the TV button controls the TV functions on your unit, and the DVD or VCR button controls the DVD or VCR functions, respectively. The codes in the combo section should be tried first, using the Direct Code Entry method on the TV and DVD or VCR buttons. If this is unsuccessful, use one of the Code Search methods to program your combo unit.

Make sure the batteries are new and properly installed.

on Jun 19, 2009 | RCA DIRECTV Satellite Remote Control

1 Answer

Hello there I have just one more favor to ask. I need the 4 diget codes for the RCA RCR860 universal remote.

Hi, I don't see what you are trying to program but I'll give a link to get the manual for the remote.

Good luck, pls rate it :)

Dec 16, 2009 | RCA Universal Remote Control

1 Answer

How to program a magnavox tv to a rca rcr860 universal remote

I found that these websites should have all the codes and instructions for most remotes

Jul 08, 2009 | RCA RCR860 Remote Control

1 Answer

Unable to program Directv universal remote for tv

The RC64RB has more codes in it. Unfortunately, it is an extra $25. BUT, it is backlit, which is very cool at night. With my RC64RB, I get 16 codes to enter for your TV (Emerson HDTV).

Dec 29, 2008 | Universal Remote Control DIRECTV Universal...

5 Answers

Finding codes

how program my control sanyo for tv curtis mathes

Sep 12, 2008 | RCA DIRECTV Satellite Remote Control

6 Answers


rca d770 universal remote how do i program

Sep 03, 2008 | RCA Universal Remote Control

Not finding what you are looking for?
Remote Controls Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66587 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you a Motorola Mobility Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides