Question about Vulcan GCO2D Gas Single Oven

2 Answers


We are building out a food trailer for our churches rescue/mission services and I have a problem. i CAN'T GET THE ELECTRONIC IGNITER TO CREATE A SPARK(oops caps lock button). I have pulled the electrode from the housing to see if it is making spark and there is nothing. I hear a click in the Ignition/Spark control unit but there is no spark. Any ideas would be greatly appreciated.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

Thaddeus,leave the ignitor in its place and try to bend/adjusted close to the burner.if you dont hear a click--click noise its not sparking and the problem may be the ignition board.if you do hear it check the orange/black wire to the could be damaged and the spark is being grounded onto the frame of the oven.the easy way to tell is if you hear the spark but no gas try to light it manually,if sucessful clean out the pilot--if this doesnt work replace the ignition cable.i service these ovens alot.if you need a part let me know and i can give you a part #.

Posted on Jan 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Like an electronic igniter for a gas grill? I believe you can pick up a replacement. Call Lowes or Homedepot. I know i have saw individual igniter's before my friends bought some for my friend and I when we were little to make potato cannons.

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Amana Convection Oven - Not heating in normal bake mode, but works otherwise

I will say that is the control board that is not working properly. Have you try to unplugged for phew minutes?, this will reset the current settings. If not, I will star replacing the control board. Good Luck!.

Jan 13, 2014 | Amana Ovens

1 Answer

F5 error code

F5 = EOC electronic control failure replace electronic control is stated in the service manual. If you have any further questions message me them back. Thank you

Nov 28, 2011 | Thermador SC302T Electric Double Oven

1 Answer

Vulcan convection oven model SG4d-1 will not ignite burners

Gas does not ignite. No spark. No Ignition light is not ON.
1. Shorted electrode on igniter/flame sense.
2. Igniter cable (high voltage) OPEN.
3. Heat relay malfunction.
4. Centrifugal switch in blower motor inoperative.
5. Transformer inoperative.
6. High limit thermostat open.
7. Interconnecting wiring malfunction.
8. Ignition module malfunction.

Sparks but gas does not ignite.

1. Gas solenoid valve off or inoperative.
2. Manual gas valve closed.
3. Gas supply OFF or insufficient gas pressure.
4. Inerconnecting wiring malfunction.
5. Igniton module malfunction.

Feb 23, 2010 | Vulcan Convection Oven - VC44EC-208-1

1 Answer

Convection works but Microwave does not heat

Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips



May 26, 2009 | GE Monogram® ZMC1095BFBB /...

1 Answer

Convection works but Microwave does not heat

try using a voltage stabiliser .it may just solve ur problem..

May 17, 2009 | GE Monogram® ZMC1095BFBB /...

1 Answer

Oven/Broiler Igniters for KitchenAid range KGST307

Oven bake ignites usually have lifetime 5-7 years. If igniter glows but gas not came in - replace igniter. Same with broil igniter.

Dec 09, 2008 | Ovens

1 Answer

Why won't my oven ignite? Vulcan model GC04c

i can get you the error code but dont have my manual at the time.a couple things to you here the clicking sound of the ignitor that ignites the gas?when you installed the regulator are you sure its on right?you should see an arrow on the regulator body and it should be pointing to the oven.also you need 10 inches of water colum (gas pressure)with a propane system where as natural you need less,regardless ill be in touch.

Jan 16, 2008 | Vulcan Convection Oven - VC44EC-208-1

1 Answer

Gaggenau oven won't heat on convection setting

this could be due to more than one cause selector switch faulty elements faulty. however this would mean both elements gone - there is one at the top and one at the bottom also worth while looking at the wiring to the convection elements. does the thermostat neon come on when convection is selected?

May 18, 2007 | Gaggenau EB294/295 Electric Double Oven

Not finding what you are looking for?
Vulcan GCO2D Gas Single Oven Logo

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vulcan Ovens Experts

John Tripp
John Tripp

Level 3 Expert

4625 Answers


Level 3 Expert

56861 Answers


Level 2 Expert

126 Answers

Are you a Vulcan Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides