Question about Kyocera Mita FS 3800 Laser Printer

1 Answer

Download for Mac

I've tried many times to download my KYOCERA FS-2800 to my Mac but I haven't been succesfull. The problem is that everytime I have to print anything, I must save the print out as a document, then I have to unplug the internet, then I have to plug in the printer so I can print the previous saved document. The printer was a gift and it didn't come with the instructions manual for Mac. What can I do?? Thanks so much for your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: download for Mac

Are you sure its an FS-2800. All of the 2800 were DP2800. Had to print with LPR ports no USB etc. Let me know if it is a FS-xxxx and what interface you are using. Cat-5 or other. Russ

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kyocera fs-3900dn 0150:0000007 error

Sounds like a Engine firmware failure. The clue is the low page count (the 00007).
You will need to upgrade your firmware and contact your local Kyocera sales comany to get a patch to correct the missing serial number and MAC address.

Aug 25, 2011 | Kyocera FS-3900DN Laser Printer

3 Answers

Where can I find driver for KYOCERA FS1030D for MAC OS X LION ?

here;s the download center for kyocera you can download here the driver for your printer.just follow this link good luck!

Aug 11, 2011 | Kyocera FS-1030D Laser Printer

1 Answer

How do I install driver for Kyocera CS 5035 on MAC

Kyocera and Copystar models are the same just replace KM with CS.

The following instructions should help you. TO download the current driver use this link to th emanufacture website;

Kyocera Printer Drivers and Mac OS® X 10.5 Leopard FAQ:
Is the installation for Mac OS X 10.5 the same as for Mac OS X 10.4 and earlier? Mac OS X 10.5 introduced a new printing architecture that requires changes to the installer and installation process. For this reason, Mac OS X 10.5 requires a new printer driver installer.

I cannot see my Kyocera AppleTalk® printer. How can I make it visible to OS X 10.5? AppleTalk is disabled by default in Mac OS X 10.5. Enable AppleTalk to discover your Kyocera printer.If you use the Kyocera installer, a message will appear, asking you to enable AppleTalk. Click Yes to continue the installation.

I cannot find Printer Setup Utility on Mac OS X 10.5. Is it still supported? Apple has removed Printer Setup Utility from Mac OS X 10.5. To install a printer, open System Preferences and click Print & Fax.

When I manually install a printer, multiple PPD files are listed for the same Kyocera model. Which should I choose? When manually installing a printer or changing a PPD for a installed printer, both Linux and Mac OS X PPDs are listed for some older Kyocera models due to a change in PPD handling in Mac OS X 10.5. Linux PPDs can be identified by the word Gutenprint in the PPD filenames.

Supported Multifunction Printers: KM-1650, KM-1815, KM-1820, KM-2050 ,KM-2530 ,KM-2550, KM-3035, KM-3050, KM-3530, KM-4030, KM-4035, KM-4050, KM-4530, KM-5035, KM-5050, KM-5530, KM-6030, KM-6330, KM-7530, KM-8030, KM-C830, KM-C830D, KM-C850, KM-C850D, KM-C2520, KMC2525E, KM-C2630, KM-C3225, KM-C3225E, KM-C3232, KM-C3232E, KM-C4008, KM-C4035E, CS-1650, CS-1815, CS-1820, CS-2050,CS-C2525E, CS-2550, CS-6030, or newer. Supported Printers: FS-820, FS-920, FS-1018MFP, FS-1020D, FS-1030, FS-1100, FS-1118MFP, FS-1300D, FS-1800, FS-1800+, FS-1900, FS-1920, FS-3800, FS-3820N, FS-3830N, FS-6020, FS-6026, FS-9100DN, FS-9120DN, FS-9500DN, FS-9520DN, FS-C5016N, FS-C5020N, FS-C5030N, FS-C8008N, FS-C8026N, FS-C8100DN, or newer.

I hope this is helpful,

Mar 08, 2011 | Kyocera Copystar CS-5035 Copier

1 Answer

Need a printer driver for a Kyocera FS-720 mono laser printer. Running Mac OS X 10.5

There is no MAC driver for this printer.....try a HP driver for a basic HP driver, that may work.

Jan 09, 2011 | Kyocera FS-720 Laser Printer

1 Answer

Mac OS10 print driver for Kyocera FS 3830N

Go to kyocera's website to download, ckick this link and it will take you to the driver you need.

OS 9

OS 10.2 and 10.3

OS 10.4 and 10.5

List of other drivers for this model printer.

Jan 08, 2011 | Kyocera Mita FS-3830N Laser Printer

1 Answer

Kyocera FS 920 won't talk to Mac OS 10.4

try this tutorial or this one and keep one thing in mind there is a generic print driver that mac can install this often works just as good as the one from the manufacturer

Sep 14, 2009 | Kyocera FS-920 Laser Printer

1 Answer

Kyocera mita fs 1000+ error pages

install the generic postscript driver and go here to tune it http://localhost:631

Jun 09, 2009 | Kyocera Mita FS 1000 Laser Printer

2 Answers

New MacBook with Mac OS 10.5.6 doesn´t print with Kyocera FS-2000

the print driver ... look for the latest print driver. Also you may want to ask a technician to do a firmware update of your printer.

Jan 09, 2009 | Kyocera FS-2000D Laser Printer

3 Answers

Looking for Kyocera Mita Ecosy FS-1010 Instruction Manual


A downloadable copy of the Kyocera Mita FS-1010 user manual is available here.

Good luck and kind regards.

Thank you for using FIXYA.

Feb 12, 2008 | Kyocera Mita FS 1010 Laser Printer

Not finding what you are looking for?
Kyocera Mita FS 3800 Laser Printer Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Printers & Copiers Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Henry Gertcher

Level 2 Expert

46 Answers

Kevin Cole

Level 1 Expert

45 Answers

Are you a Kyocera Mita Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides