Question about Sharp AR-5320 Black and White Copier

2 Answers

Error code hi i have a problem with sharp AR-5320 copier. H and 4 are blinking can you help me please

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Hi, H4 is a heater error. Try resetting it by the following; Enter #, interupt, Clear, interupt, display goes dead, enter 14 then print. That will clear the error code, however if you have a problem with the heater it will return. It is probably the thermal fuse has tripped, which is resetable by removing the fuser unit

Regards

Andy

Posted on Jan 22, 2008

  • Mohammed Ali Khan Dec 26, 2011

    Error gone..................... Thank you very much.....

  • Anonymous Apr 04, 2017

    Thank you so much.. I tried it too and it worked. I was so scared I had broken the office copier.

×

Ad

Thanks it is working now

Posted on Jan 22, 2008

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

babaprithi
  • 372 Answers

SOURCE: My AR-5320 Sharp Copier is

Push the 'clear' button and then the 'auto' button then the 'clear' button and then the 'auto' button again.This should be done as quickly as you can and the console will go blank.Next,select 14,which is the low temp clearing code, and then push 'start' and then turn the machine off and back on again.

Posted on Sep 19, 2011

  • 44 Answers

SOURCE: my sharp ar-5320 copier has an error code blinking

The H4 stands for a problem in the heater circuit for the fusing unit, It could be a thermo fuse, thermostat, thermistor, bad heat lamp or worn fuser rollers. The H4 will not reset until either of these components is repaired or replaced. Hope this helps.

Posted on Sep 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SHARP AR 5320 PHPTO COPIER ERROR H-4


fuser error which could be a number of issues , press green copy button for sub-code

Aug 19, 2014 | Sharp AR-5320 Black and White Copier

2 Answers

HOW TO FIX ERROR CODE 444 BLINKING FOR SHARP AR-5516?


http://www.sharpmea.com/cps/rde/xbcr/documents/documents/om/34_ppc/AR5516-D-5520-D_OM_GB.pdf

May 20, 2014 | Sharp AR-5320 Black and White Copier

1 Answer

My sharp ar-5320 copier has an error code blinking it flashes h and 4.


The H4 stands for a problem in the heater circuit for the fusing unit, It could be a thermo fuse, thermostat, thermistor, bad heat lamp or worn fuser rollers. The H4 will not reset until either of these components is repaired or replaced. Hope this helps.

Sep 29, 2011 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

My AR-5320 Sharp Copier is Blinking h-4 please send me the code to repair it.


Push the 'clear' button and then the 'auto' button then the 'clear' button and then the 'auto' button again.This should be done as quickly as you can and the console will go blank.Next,select 14,which is the low temp clearing code, and then push 'start' and then turn the machine off and back on again.

Sep 14, 2011 | Sharp AR-5320 Black and White Copier

1 Answer

Sharp ar 5320 displayed error code h4 and it is blinking


Hello :

It's a bad component in the fuse. It could be a bad thermofuse or thermistor . Better to take it to a Sharp dealer . They should be able to repair it right and quickly .

good luck .

please don't forget to rate !

Apr 04, 2010 | Sharp AR-5320 Black and White Copier

1 Answer

Sharp AR-5320 B & W Copier giving L 4 error msg alternatly


L4 is main motor drive overload. It could be a power problem going on with the copier. Are these copiers plugged into surge protectors?

If you can have a Sharp technician look at it, it would be a good idea to determine if the motor, power supply, or main board is the culprit.

Sep 21, 2008 | Sharp AR-5320 Black and White Copier

1 Answer

Sharp AR-5320 Copier giving L 4 error alternately


The only way to corret the problem is to replase the fixing unit... That is what the L4 is refering to. It is not reading the correct tempurture..

Sep 20, 2008 | Sharp AR-5320 Black and White Copier

1 Answer

Sharp AR-5320 giving me L 4 error some time


Usually the error is caused by a main drive over load. The machine needs to be looked to determine if its the motor, power supply, or a board.

Sep 19, 2008 | Sharp AR-5320 Black and White Copier

1 Answer

Sharp AR 5320 error h200


Hi,

H4 indicates there is a fuser error.

Try resetting it by the pressing the following buttons on the display in sequence,

#, interrupt, Clear, interrupt,

display should go dead,

enter 14,

then press print, This will clear the error code
press CA to get out and return to normal.
However if there is still a problem with the fuser, the code will return. Then you may need to have a tech look at what is the problem.
Hope that helps...

Lbcoaster

Aug 05, 2008 | Sharp AR-5320 Black and White Copier

Not finding what you are looking for?
Sharp AR-5320 Black and White Copier Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

267 Answers

k24674

Level 3 Expert

8081 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...