Question about Computers & Internet

2 Answers

Dsl modem speedstream 5200

Purchased used without manual or instructions. How do I access the modem for resetting or configuration. What is the ip # of the modem?
I cannot find anything on the siemens website for this modem they only show the 4100 and 4200
thanks

Posted by on

  • 1 more comment 
  • north10 Jan 25, 2008

    thanks for your help it worked

  • killopenshot Aug 29, 2008

    My at&t 4100b DSL modem use to work just fine. I stopped using it for about a month and it now sometimes works and sometimes doesnt. Please help!!!

  • Anonymous Oct 02, 2008

    I got a new modem speed stream 5200 . i have a BSNL line



    how do i Configure this modem.?? to BSNL line

×

Ad

2 Answers

I bought a new Motorola DSL modem from AT&T since my old slipstream DSL modem broke. I got my new modem today, but when I connected it only 4 out of the 6 lights were on. The light for "internet" just kept on blinking. How do I resolve this?

Posted on May 16, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Click here

Posted on Jan 22, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my Siemens SpeedStream 4100 to work with my new AT&T DSL service. I used to have DSL through a local company, Humboldt Internet, but they stopped offering DSL and sold off their DSL...


When you are connecting to it, are you using the lan connection straight into the device? When you do that is it showing as at least connected to the device on the computer? You did not post the operating system but can you check the router address by using the command prompt and using tracert commands to see what it is listed as? If you are using windows 10 have you use the powershell command to reset the winsock? Did you use the 30 30 30 reset method on the device?

Feb 27, 2017 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

No activity on my new speedstream 4200


Ethernet and DSL lights are indicating you have ADSL available on your line, and that you have computers connected to the router.

What has probably happened is that Optus did not set up the new router with your username and password. Go to thw following website for details on how to setup the modem.

http://help.optuszoo.com.au/help/dsl/connected/windows/optus_modems/speedstream_4200



Manual Modem Settings The Optus DSL Broadband self-installation CD configures all the necessary settings for your DSL Broadband service. You do not need to manually configure your modem if you have run the self-installation CD. While the following information is provided for your reference, using the self-installation CD is the recommended method for configuring your modem.
The Siemens SpeedStream 4200 ADSL modem can use either USB or Ethernet to connect to your computer.
  • If you are connecting via USB you will need to run the self-installation CD to install the USB driver before you connect your modem. The Siemens SpeedStream 4200 ADSL modem supplied by Optus has been customised for the Optus DSL Broadband service. Only the USB driver supplied on the self-installation CD will work with the Optus service. If you do not have the self-installation CD, you can download the latest drivers from the Siemens website.
  • If you are connecting via Ethernet it is possible to manually configure your modem without the self-installation CD. Only a web browser is required.
After connecting your modem there are two key steps to manually configure your modem for the Optus DSL Broadband service:
  • PC settings - Configure your computer's Ethernet network interface.
  • Configure Your Modem - Set the password in your modem's configuration pages.
top
PC Settings Step by step instructions are provided for each of the supported Windows operating systems:
  • Windows 98/Me
  • Windows 2000
  • Windows XP
  • Windows Vista
top
Configure Your Modem To configure your modem settings you must now access the configuration manager using your web browser. This is done by entering the IP address in the address bar of the browser window as follows:
Note: If you are updating the password in your modem, please complete steps 1 to 3 only.
Step 1 of 5
  • Enter http://10.1.1.1 (Default IP address of the Optus Supplied Siemens SpeedStream 4200) to access the modem Configuration software. You may wish to add this page to your Favorites for easy access later.
  • The following modem System Summary screen will appear.
ss4200_home_disconnected.gif Step 2 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click PPP in the list of options that appeared below the word Setup.
  • The ISP Password page will appear:
ss4200_ppp.gif
  • Replace the default username (john_citizen@optusnet.com.au) with the username provided for you by Optus DSL Broadband.
  • Replace the default password with the password provided by Optus DSL Broadband in the Password field.
  • Note: You will find your Optus DSL Broadband username and password on the letter you received with your self-installation kit.
  • Save these details by clicking the Save Settings button.
Step 3 of 5
  • The next screen will ask you to disconnect and reconnect to the Optus DSL Broadband service.
ss4200_ppp_reconnect.gif
  • Click the link to return to the System Summary page.
ss4200_reboot_3.gif
  • Click the Disconnect button to disconnect the modem from the Optus DSL Broadband service. The text on the button will change to Connect.
ss4200_home_disconnected.gif
  • Click Connect to reconnect the modem to the Optus DSL Broadband service.
Step 4 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click the word Mode in the green menu of options on the left side of the web page.
ss4200_mode.gif
  • Confirm that Optus Bridge is the selected operation mode.
  • If Optus Bridge is not selected click the radio button next to Optus Bridge to select it.
  • Click the Apply button.
Step 5 of 5 ss4200_reboot_1.gif
  • Click the Reboot button to restart the modem using your saved settings.
ss4200_reboot_2.gif
  • After about a minute the modem will return to an operational state and connect to the Optus DSL Broadband service.
ss4200_reboot_3.gif Once the modem has rebooted and the ADSL connection has been successfully established the DSL LED indicator will light steady green.
Your modem is now connected to the Optus DSL Broadband service.

Jul 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Speedstream 4100 does not work with router


you can't.
when the item name as modem/router. it means the main function is modem with added router function.
you can't connect 2 router/modem together. both need access to the internet and IPS for it function correctly.
however, you can connect 1 modem and one router.

Oct 19, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

I am having trouble accessing the ip address for this modem why?


jab follow the step below to access your DSL, the ip given is a default ip from the factory.
pls reset the DSL before you continue(press and hold for 4-6 seconds until the power button blinks red)

Connect a computer to the modem.
Turn on modem
Turn on computer
Use a browser to open http://192.168.0.1
Click on Advanced.
(you then have lots of things to look at)

Apr 23, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

5200 speedstream blocks my peer to peer sites, mystic island game site, all bittorrent downloads and limewire


Hi Shepherd1880,

First thing:
The computer that you're using for these services needs to have a static IP address configured in your private network and not a DHCP address assigned by the router.

Secondly thing:
Depending on your security policies (computer firewall and/or router), you will need to sure that the settings from your router and/or your PC firewall are not blocking the ports that you need to connect for these services.

Once you know that you have this area covered, you can move forward with the necessary procedures to properly configure your Speedstream 5200 using the link below:

http://portforward.com/english/routers/port_forwarding/Efficient-Siemens/Speedstream-5200/BitTorrent.htm

Hope this helps!

Jan 01, 2008 | Efficient Networks SpeedStream 5200 Modem

3 Answers

Wireless network broken, access to WRT54G & Motorola 2210-02 via http.. denied


I have att yahoo dsl which I installed about a year ago. The process required bridging the ADSL Modem (in my case a speedstream 4100) and accepting dynamic IP addresses and configuring PPPoE on the WAN side of my Linksys router. The ATT support person walked me through the entire process over the phone even though I was comfortable with making the Linksys configuration changes as I had to do the same in China without technical support. The modem configuration was no more difficult than the router configuration as it was performed from a web browser too. The biggest warning was that to reverse the modem change (if desired) required use of a reset button because the web interface was disabled as a result of the configuration change. My advice to you especially if you are willing to attach the Linksys router to the telco modem is to contact the ATT highspeed DSL support line and see if they will walk you through it like they walked me through it. Reviewing your Linksys User's Guide and understanding the configuration of that device would probably be appreciated by the ATT Support person as well as assuring you can access the Linksys router to configure it during the call.

Dec 08, 2007 | Linksys Wireless-G WRT54G Router

1 Answer

Speedstream 5200 nat


you should be able to access your modem in your web browser using 10.1.1.1 as the address . if u haven't changed the password and user name they should both be admin. once in the settings change from static IP to dynamic ip this should solve your connection problems

Nov 15, 2007 | Efficient Networks SpeedStream 5200 Modem

2 Answers

Speedstream 4200 setup


I have just set up 4200 with dsl - you may find that you need to reset modem before you can configure. I was told that you need either a grey or yellow cable from your laptop to the modem. I use 10.0.0.138 to access modem. The 4200 I have was from a bigpond a/c - originally configured accordingly.
Regards,
Richard

Nov 12, 2007 | Siemens SpeedStream Modem (4100) (SS4100)

4 Answers

Speedstream 5200


here is the pdf download link for this modem

 

http://www2.windstream.net/downloads/links/SpeedStream211.pdf

 

should be of some use

Oct 10, 2007 | Efficient Networks SpeedStream 5200 Modem

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...