Hi, i have the Denon AVR-2802 reciver. My issue is when i plug my xbox into the dvd compontent inputs, i cant get any audio or video. I was working a few days ago, i had to disconnect the amp, when i hooked it back up, it no longer works. Any help would be much appriecated. Thanks.

If you look at page 16 of the user manual it tells you how to assign the devices to the optical connections. Once this is done it should work.
If you don't have the manual just type "denon avr 2802 manual" into Google and it will show a free PDF file of it. On my search it came up first!

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Denon-AVR-2802-Receivers-manual/id/363bh830/t/2/

Is it silent for ALL inputs including the Test Tones?

Page 33

Function incorrect, Muting, Tape or EXT Input on when it shouldn

Actually, Denon used a thermal fuse in the primary of the power transformer. Have a tech check the primary winding and see if it's open. if so , have it bypassed

After connecting the Wii cables, connect a video cable to the "monitor out" connection to a compatible input on the TV.

The processor that creates the surround is all on 1 chip so sounds like a software issue.

Call Denon to see if they have a firmware update for your unit this usually is free and may fix the problem

hi there, i don't have a solution unfortuantely, but i may have the same problem. I have a denon 2802 av receiver, i bought it second hand and I can't seem to get the component video in / out working. Are you supposed to just plug it in and it works? Because I can't find any buttons or settings to select component in / out as my input / output sources?

Dear Armani,

You cannot put de leads from an MP3 player or your TV into the pre-amplified connection of your Denon,
the phono "stage" is a low input stage, your input from MP3, TV, CD, DVD oscasetteplayer is high output (a 5 to 10 times stronger signal)
Try every other stage like tape 1 or 2, this will work just fine,

succes

You can use an auxiliary input on your Denon. What type of connection is available on the sound card? Some models have toslink while most have the mini-jacks which will require an adapter (mini-jack to RCA) which you can connect to the AUX input on your Denon. On the computer, make sure the LINE-OUT of the sound card is activated.

REPLACE MUTING TRANSISTORS IN DSP PANEL

If DIGITAL sign on the display blink, it mean the DSP board is defective. probably the DSP itself