Question about BenQ DV3080 30 in. LCD Television

3 Answers

Black screen after approx. 1 second.

I have had this unit (which I paid $2200) for 2 years now. I thought the unit was great and always enjoyed watching movies and HD programs without complaint. Until now. The screen is still beautiful... but always black. I turn on the set and after approx. 1 second the screen goes black with only audio to enjoy. I called BenQ support to no avail other than your warranty is up and you'll have to ship it back for $40, with a $60 estimate charged and an approx. repair charge of $200-$300. Needless to say I was appalled by the response I received and have noticed the same complaints throughout the internet. Unfortunately I have been unable to determine (YET) the cause of the problem. If a TV less than $100 has a 5 yr warranty wouldn't it only make sense that one at $2200 would also be taken a little more seriously on the service-end of things. I guess not... another TV sold for BenQ and nothing but regret and disappointment left for me. Well hey, you can't see that on TV... not on mine anyway!

Posted by on

  • 2 more comments 
  • nnd206 Jun 10, 2008

    yes i have the sane problame any solution please advice

  • Anonymous Dec 17, 2008

    my DV3080 is also about 2 years old and same story...any help would be welcome

  • Anonymous Dec 30, 2008

    All I get is a black screen when I turn mine on. JUNK!!

  • Anonymous May 08, 2009

    same problem... audio but no picture, just a black screen....sigh



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I have this tv (benq dv3080) and after 4 years it happened to me too. for those who still have it if i fix it i will post it here.

Posted on Nov 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, one transformer on lcd inverter board was defect, (open). I used one fron another board and work perfefcly.

Posted on Nov 30, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It the inveter that gone bad on it.. if you still have the unit you might find a replace ment online i have 2 of these units .. and i had teh same thing happen .. even thouge i was giveng these unit way back when so it not as bad as you spening 2200 on the one you got..

Posted on Sep 06, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My lg lcd screen has sound but no picture, as soon as i turn the tv on, a picture appears for 1 second then a black screen replaces it. What is the solution please.

Bad Switch mode power supply (SMPS) look for bad capacitor on SMPS board usually the value are 2200 microfarad 35volts they are bowed on top heats kill these caps they tend to dried up.

AFG TV of Las Vegas, NV. 12 years experience fixing HDTV

Feb 17, 2011 | LG 42LC2D 42 in. LCD HDTV

2 Answers

2002 chevy 3500 van temper mental problem has been happening for approx. 4 years. Turns over fires up for approx 1-2 seconds and dies. For past 4 years if I waited for a couple of minutes and tried again...

quick thought may be a coolant temp sensor not reading correctly for the computer it wont throw a code and will make it hard to start usually bout 25 bucks or less but kinda works like the choke for this app.

Jul 31, 2010 | 2000 Chevrolet 3500

1 Answer

Which printer should I use

I don't know anything about screen printing, but is there a reason that you can't use a monochrome laser printer for your Black and white...The cost per page is at least 15-20 times less! Especially if you go with HP and get remanufactured cartridges from a reputable source.

Apr 23, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Our display board was replaced now the y sustainer board needs replaced

Three suggestions:
Contact They have a selection of replacement boards or will repair it Fees are usually $50 to $125 and I have had great success with them.
Another would be to try and lastly do a Google search, if you know the exact part number, to find other sources for the board.

Sep 04, 2008 | Toshiba 50HP66 50 in. Plasma Television

1 Answer

Samsung plasma TV, half screen is blacked out

Well, as per my last posting, I thought I would share. The problem of the bottom half of my 42 inch Samsung Plasma blacked out - meant a trip to the local TV repair shop. I have to say, they were great. I took it in and they were able to fix it after replacing a part - had my TV back in about a week. Cost was approx. $300. This was well worth it, considering how much I had paid for this TV only a few years ago. I had the repair done last month and so far, it's been great. Sorry, but I can't remember the name of the part.

Aug 10, 2008 | Televison & Video

1 Answer

LCD Screen problem

You have a failed inverter circuit. This is a very common fault with BenQ and other LCD monitors. I have seen more FP737 and FP731's and all their cousins in the last 2 years then I care to count.

You will be best to take it to a TV technician and have them do the repair. There are ways to fix it yourself, but the chances of success are not great without a decent amount of electronic knowledge.

Call several places and get approx quotes based on the inverter fault. A lot of TV techs will not work on LCD monitors and is another good reason to call around first.

One final thing, check the manufacture date on the back of the monitor, these normally come with a 3 year warranty and it will be either expired now, or very close to it. If it is still under warranty, then contact BenQ near you to facilitate the repairs.

BenQ support webpage.

Apr 15, 2008 | BenQ FP731 17" LCD Monitor

Not finding what you are looking for?
BenQ DV3080 30 in. LCD Television Logo

Related Topics:

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75032 Answers


Level 3 Expert

78010 Answers

Lawrence Oravetz

Level 3 Expert

10073 Answers

Are you a BenQ Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides