Question about Labtec Microphone Microphone

1 Answer

Labtec verse 504

We have had this mic for a few years now, and i am finally deciding to use it, but now after i hooked it into the computer it doesnt work, i have went to the audio settings and messed with the mic settings, it just seems to not work, is there something im doing wrong

Posted by on

  • 2 more comments 
  • Anonymous Jan 29, 2008

    I have a labtec verse 504 always worked perfectly and isn't that old. My sound system and speakers seem to be working fine, I was going to record something into my sound recorder that comes with windows but the mic wasn't working and the recorder is fine.

    The only thing I did different was that I had upgraded to Millenium 2000 from windows 98 SE and then went' back to windows 98 SE and when I tried my mike it is dead. I tried everything with the sound controls and checked back of computer made sure all was plugged in correctly, cleaned the end of the connector for any dust and nothing. I can only assume the mic is no good what else can it be?

  • Anonymous Oct 29, 2008

    I just bought a used Verse 504 Labtec but I don't know how to see if it works. I've never owned a mic before.

  • Anonymous Dec 18, 2008

    Could find the device driver (if necessary) for the Labtec Verse 504.

  • Kkpossman Mar 07, 2009

    I have this mic the Labtec verse 504- only problem is I don't know how it works, turns on anything. Or if it needs a download to work.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If you are using skype, go to the upper left hand top and click on call. Then click on audio settings and make sure your microphone is listed as the mike to use in the window of the drop down menu. It should say logitech something in the window that says microphone.

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When using Skype I can hear other person fine but she can barely hear me. I have tried to adjust sound on skype but it doesn't seem to make a difference


Hi,
I had the same problem and I replaced and/or used "external mic for Notebook " for this purpose and everything is ok now..
pls use new mic and make a test call to SKYPE to hear your mic voice as well..


Take care and if it succeeds please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!

Jun 20, 2011 | Labtec Verse 504 Consumer Microphone

1 Answer

Does my labtec verse 504 take a driver?


Depening on what operating system you are running, no it will not need a driver. Just plug it in and it will work. Please make sure you rate my answer 4 thumbs if possible, it would help me a great deal. I would be forever grateful!

Thanks
Tim

Oct 11, 2010 | Labtec Verse 504 Consumer Microphone

1 Answer

I hooked up to a different computer and it is not working


The microphone input is probably not on. Go to Start ->Control Panel -> Sound Audio ->. Depending on your OS there is a control for the mic volume

Sep 05, 2010 | Labtec Verse 504 Consumer Microphone

1 Answer

Is there a microphone on a labtec 1200, the box says there is, the webpage doesnt say anything, my windows xp with service pack 3 cannot detect any microphone,


To check
Plug in the webcam

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Aug 02, 2010 | Labtec Logitech 1200 Webcam

1 Answer

Mic hooked up, but doesn't work?


You have to turn on the mic. volume. It always automatically turns off when you turn on the power again. Or, you can press the gain button (white button). Good luck!

Jan 06, 2009 | Audio Players & Recorders

1 Answer

Labtec microphone


try to adjust the line in volume when you double click the volume icon, it may be muted

Jul 24, 2008 | Labtec Microphone Microphone

1 Answer

Labtec verse 504 mic


Normal 0 Double click on this site
http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
to down load Labtec Camera Drivers.
Then
Disconnectthe Camera from the USB port and reinstall the CD or Downloaded softwareprogram. When the program asks you to connect the camera to theUSB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera’s have to besetup on the program they are to be used with. Just installing the cameraon your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order forthe Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Yourfriends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

Jul 08, 2008 | Computers & Internet

1 Answer

Labtec Verse 524 Consumer Microphone


Almost all desktop microphones for the computer are not amplified (which means that they do not have their own power source). Instead the computer's sound card provides the amplification for the microphone. All you need to do is plug it in, and you're all set.

Apr 19, 2008 | Labtec Verse 524 Consumer Microphone

1 Answer

Microphone does not record sound after connected to pc


Did you check the Device Manager to make sure the audio drivers are installed and the audio device is working fine?
Apart from that, the sound recording settings in Vista should be set correctly to select the mic as the audio input device (it might be set to "Line in" instead), and to set the recording levels high enough.

Jules

Oct 01, 2007 | Labtec Verse 524 Consumer Microphone

Not finding what you are looking for?
Labtec Microphone Microphone Logo

Related Topics:

1,555 people viewed this question

Ask a Question

Usually answered in minutes!

Top Labtec Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Labtec Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...