Question about Sony PlayStation 2 (PS2) Console

2 Answers

Power Button does not push in and out

On/Off ButtonThe red light is on when  connected to power, but the button no longer detents when pushing it.  We cannot get it to go green because of this situation.  Is this fixable?  is it possible to open up the unit without further damage?  If so, how?

Posted by on

Ad

2 Answers

I opened up the console by removing the rubber foot covers and plastic tab covers over 6 screws.  Once opened I blew out the dust with canned air.    I then noticed a white square detentable button the size of an eraser head on a pencil that was loose.  It fell off of the small circuit board that controls the on off button for the unit.  I took a small dab of silicone sealant and placed it on the bottom of the button and carefully placed it onto the board.  There were four aligning solder points on the button and the board.  Be sure not to cover these with sealant.  Turn the power on and test the button to make sure it turns on and off before letting the button dry.  There were no concerns/issues with holding the board with the power on.  It now works.

Posted on Jan 22, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,003 Answers

Http://www.richspsxparts.com tells you how to disassemble the game console and replace the old switch this also sells new switches

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I turn on my ps3 and the green light comes on for a short time and the it beeps three times shuts off and the green light turns red and starts to flash. If I push the power button again the red Light


you need to change your power box there is a bad connection with the wires. its over heating you might whant to buy another at game stop or take it in to get fixed. the more you messed with it it might mess up your whole system.

Aug 18, 2012 | Sony Playstation 3 (PS3) Console

1 Answer

How do i reset the service light on a bhm (voyager) v4 ceiling hoist?


To turn off the service light that is flashing red on your V4 BHM ceiling lift, you have to proceed this way:
1- Power off the lift with the red cord
2- On the hand controller, push on the PROG + RETURN button at the same time and maintaint it
3- Power on the lift
4- Keep pushing on both buttons, and push in order: UP, DOWN, LEFT, RIGHT.
5-The green light will flash and the buzzer will beep 5 times
6- Release all buttons on the hand controller.
7-Push on the UP button many times, till your hear 4 beeps
8-Push the PROG button once.
9-Push on the LEFT button many times, till your hear 3 beeps
10- Push the PROG button once.
11-Power off the lift with the red cord, then back on.
The service light should be off.

May 25, 2011 | Health & Beauty

1 Answer

The wii fit game is telling me to push the power button on the balance board with my foot. It blinks blue and that's it. The batteries are fine. So what do I do?


You need to sync the balance board with the Wii. It's easy to do and takes 10 seconds.

1) Start Wii Fit.
2) When it asks you to push the power button as you're describing, open the SD card slot on the front of the Wii and observe the red button.
tkahill.gif

3) Now, flip over the balance board. Remove the battery cover on the bottom of it, and press the red button beside the batteries, and the blue light should start to blink.
tkahill_0.gif

4) While the blue light on the balance board is still blinking, quickly press the red button on the Wii. If they are both blinking at the same time, they should be syncing to each other.

5) Your Wii Fit Balance Board should now be synced with your Wii! If it has been synced successfully, you will no longer need to sync it, and should now automatically connect when the button is pressed with your foot.

Apr 09, 2011 | Nintendo Wii Fit for Wii

1 Answer

ERROR 5B00, no me deja imprimir


1. Turn off the printer ( "Power" button).
2. Hold the button "Resume" (red circle in the triangle) and push "Power" button.
3. When printer become ready hold the button "Power" and release button "Resume".
4. Push button "Resume" 2 times and then hold "Resume" and release "Power" button.
5. When I hold button "Resume" I push and hold "Power" button and release "Resume".
6. When I hold "Power" button, push button "Resume" 2 times and release both buttons.
7. When printer become ready on the display write "CANON Idle".
8. Push button "Resume" 4 times.
9. Then push "Power" button 3 times to turn off printer.
All done. The printer is ready to print.

Nov 22, 2010 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

Wii fit board - blue power light flashes then goes off and wont work. This is also happening to my parents one and we are both on our 2nd wii fit board each. Have reset red button but no joy - help please


Unplug the AC adapter from power cord then wait 10 min and plug it again.Open the SD Card slot cover on the front of the Wii console, just below the disc drive, and press and hold the red SYNC button for 15 seconds. This will clear all synced Wii Remotes from the console.Then push the red button again, then open the batteries cover on your
Wii Remote and push the red button there.After that push the red button on console one more time, then open the batteries cover on your Wii Fit and push red button there.If this not help may your wii fit need service.


Nov 02, 2009 | Nintendo Wii Fit for Wii

1 Answer

Power lead


The Switch is non-powered except by the board.
Black should go to power or + side

It's like a wall switch for the light (power comes in on one side and out on the other) If it were a push in to a detent (like the Old 386's and 486's with AT power supply) to connect and a push in to release the detent it would make a difference. With these power buttons on the cases now, it doesn't.

Apr 19, 2008 | MSI K9VGM-V Motherboard

1 Answer

Compaq Presario 4400us


Either the new power supply you purchased is not functioning correctly. But, assuming it is now that you are getting some form of power to your PC, it is very likely the motherboard. Whatever fried your old power supply (or it could have just been the power supply itself) most likely fried your motherboard in the process. Probably not the CPU since the MB can't even post.

Jun 21, 2007 | Compaq (388746-001)...

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

shaun taylor

Level 3 Expert

1527 Answers

juanmireles1

Level 2 Expert

219 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...