My Turtle Beach X1 headset got chewed by my dog, wire is in two seperate pieces

Contact Turtle Beach directly...don't waste your time here.

Check if the buzz stops when you remove the talkback cable. If so, then try a wireless controller if you're using a wired one. Also, don't use a play and charge kit because it causes a lot of buzz on the headset.

Have you tried using your X1 on your PC? Try connecting your X1 to a PC and speak into the X1 mic. Can you hear yourself in the headset? If yes, then the X1 mic and headset are OK but you need a new chat-controller cable. If not, then you should contact Turtle Beach about it --- [email protected].

The green light (or red if it's muted) should glow on when you plug in the USB. If it doesn't, it means there's a problem with the power feed to your X1 and you should contact Turtle Beach tech support to get it fixed.

The red & white RCA audio cables.

Remove the four screws on the bottom of the amplifier unit. Separate the top and bottom plastics. Put a drop of alcohol into the mic switch then move it back and forth a bunch of times. This should remove the residue from the dog **** that accumulated on the switch contacts.

i suggest you hit the product with some force

Your best long term fix will be to solder the wires together then tape them individually and finally tape the whole thing. Second choice will be to use crimp (**** splice) connections and then tape. Last choice will be just twisting stripped wires together and tape everything.

Do you have your play n' charge kit plugged in? if so, then thats what is causing the buzzing sound

You need to purchase a new talkback cable or contact Turtle Beach support about getting one under warranty if your headset is new.