I have a sony color rear projectors and no image comes out and the audio sounds like really slow notion

there are 3 LCD panels in the projector.
red panel,green panel and blue panel
I seems that the red panel is failing
We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

Its most likely an issue with the audio out IC . Most parts have been discontinued for that model but if you send a email request for assistance to [email protected] they will help and they should have the audio IC available for that model.

Not much help if do not know the model number and only a small chance it is minor issue.

Sounds like the Blue CRT has an issue which is very common problem for that model. I wouls try replacing the Blue CRT assembly.

Hi,that is come from your convergence module,theres some ic in there call stk wheres they controls the picture linearity but
you will need a technician to fix it...
hope that will help you
regards Alan

i am having same problem did you fix it ?

These sets have several common problems which are listed below.

Problem #1) Convergence

Yours may have one or more of the following symptoms

• Screen Looks 3-D
• Colors wont align
• Screen may look distorted or warped
• No Audio/Video - makes a chirping sound.

Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....

• Dull looking picture
• White looking picture
• Halos around objects
• Red/Orange looking picture

You can see some more examples and find the fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html



Go to this Blog. It "should " solve the problem.
Really, Really simple, do it your self solution !!
Instructions and pictures included :D

This blog covers many makes and models with many issues solved, just with that one solution
Give it a try, it's free and simple :D


Hope the blog helps you.

Jean

convergence amplifier ICS !!! replace them and associated pico fuses ICS # start with STK

What color does it flash? Also it may be blinking a code so we need you to count the # of blinks it should blink a certain # of times, then pause, and blink that same # of times again. Let me know and I will be able to help you furthur.

Tim