Question about Magic Chef CYE4000AWW Electric Dryer

2 Answers

Kenmore dryer stopped working, start button does nothing

The dryer was working fine then in the middle of a load it stopped working. I pressed the start button and it worked for about 10 seconds. Now when you push the start button there is nothing. Power is fine. I replaced the start button but still the same. Timer is counting down fine. The drum moves fine. The starter must trip a relay. Where is the relay? The orange wires run down the back and the schematic diagram doesn't have colors on the wires.

Posted by on

  • 3 more comments 
  • wetwrinkled Jan 21, 2008

    note sure how the CYE4000 ended up in my post. Mine IS a Kenmore - model #C1108564290.

  • wetwrinkled Jan 21, 2008

    model # is correct off the tag inside the door. Dryer is Sears Canada Inc. About 12 years old.

  • wetwrinkled Jan 22, 2008

    Found the problem. It was the thermal fuse. See "My dryer is not doing anything" and the solution posted by Catriver.

  • sky34 Jan 29, 2008

    i have a magic chef dryer. in the middle of a load it quit...nothing, no power. I bypassed the switch on the door and still nothing. I checked the outlet and it had power. What is wrong?

  • stressedddd Mar 07, 2008

    model#c110-8470290 kenmore stopped . power is fine .but nothing is getting to the dryer

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Kenmore 400 series dryer did this recently. Stopped running in the middle of a timed dry. Would not re start. I looked at this web site and got the idea it might be the thermal fuse. Had my husband take the thermal fuse out (VERY EASY) and had it tested. IT WAS BAD. Replaced the thermal fuse for $20.00 and ta da it is working again.

Posted on Oct 18, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Need the model # from the unit should be where the door closes to the CYE4000AWW is not a Kenmore Model

Posted on Jan 21, 2008

  • 1 more comment 
  • Gary Davd
    Gary Davd Jan 21, 2008

    please dlb check the model # from the dryer tag not off a book that number is not coming up either

  • Gary Davd
    Gary Davd Jan 21, 2008

    Sorry cant help you with Canda Kenmore stuff might want to call Sears service in your area and ask them for the wiring diagram

    Sorry

  • Gary Davd
    Gary Davd Jan 22, 2008

    OK Glad you got it working

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

docjohn174
  • 943 Answers

SOURCE: Kenmore dryer stopped working, start button does nothing

hi thanks for the question i would check the thermal fuse at the back remove back panel . by the air duct theres a small thermal fuse with 2 smaller blue wires to it check that it does cause this thanks appliance doc

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore Elite HE4 smartheat quiet pak 9 that has power but will not start.


Sounds like the belt that turns the drum could be broken. I'd check that first.

Oct 12, 2017 | Kenmore Elite HE4 Electric Dryer

1 Answer

I have a Kenmore 400 series top loading electric dryer that just stopped working right in the middle of a load of clothes. It was working just fine and then it just stopped. Now it will not turn on at...


Hi there....this sounds to be like you blew the breaker. Go to your breaker panel in your house and search out the fuse for the dryer. This will be a double 110 volt breaker. You need to reset both sides to be sure. It is easily locatable as they almost always have the items listed on the inside of the door of the panel. If this works for you great. Please try to remember to click on the yes box on your way out ...thank you and good luck.

Oct 10, 2010 | Kenmore 73952 Gas Dryer

1 Answer

Our dryer stopped working in the middle of a load. Now when I press the start button the timer does nothing but click. I am not sure but I thought it might be the push start button was faulty. Any ideas?


Hi,
  • Check to see whether there's power getting to the dryer. Is it plugged in? If you plug something else into the outlet, does it work? If not, check for a blown fuse or tripped circuit breaker.

  • If the door switch or the door-switch actuator is defective, the dryer won't work and you need to replace the failed component. The switch is inside the dryer main housing near the door frame. Sometimes you need to raise or open the top or front of the dryer to reach the switch.

  • Often the main wiring connection from the house, at the dryer, burns and the connection breaks. In this has happened to your dryer, you need to replace the power cord and the terminal block inside the dryer to which the wire is attached.
Hope this will fix your problem for sure.

May 08, 2010 | Kenmore 64892 Electric Dryer

1 Answer

My Dryer just stopped working in the missle of a


with your door open have some one try and turn the dryer on while you hold the button in and turn the drum by hand to get it started.
if it starts the your motor may just have lint build up around it causing the contacts to be dirty.
there is a couple of other things that might have gone wrong the main control board has gone bad or the door switch, motor has gone out

Jan 30, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Push start button but nothing happens but buzzing noise


Is Kenmore a Whirlpool?

  • Here is what happened.
  • Stopped running mid-cycle.
  • Dryer set idle for about two hours Then I pushed start butten again.
  • It ran fine to finish load.
  • Next load it was totall dead and silent and remains that way.
  • The vent hose was unobstructed.

May 04, 2009 | Whirlpool Dryers

1 Answer

Kenmore 90 plus series dryer won't work


Sounds like the belt has broken. You could probably also use new drum support rollers. Check out this site which shows how to change a dryer belt:

http://repair2000.com/wpoolbelt.htm

It's not a difficult job if you're comfortable working with hand tools.

Oct 17, 2008 | Kenmore 62872 Electric Dryer

1 Answer

Kenmore dryer stopped working, start button does nothing


hi thanks for the question i would check the thermal fuse at the back remove back panel . by the air duct theres a small thermal fuse with 2 smaller blue wires to it check that it does cause this thanks appliance doc

Sep 13, 2008 | Maytag PYE2300AY Electric Dryer

3 Answers

Dryer won't Start


the problem might be the start switch itself. if the switch is going bad it could have either a carbon buildup on the contacs preventing it from starting (unlikely) or the contacs are wearing out and it is more hit or miss if it will start. as time goes on the problem will get wose

Oct 31, 2007 | Kenmore 84152 Electric Dryer

1 Answer

Electric dryer


Disconnect the power cable, remove dryer's cover and look for a loose wire.

Mar 26, 2007 | Magic Chef CYE4000AWW Electric Dryer

Not finding what you are looking for?
Magic Chef CYE4000AWW Electric Dryer Logo

2,547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Wayne Fellows
Wayne Fellows

Level 2 Expert

262 Answers

Are you a Magic Chef Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...