Question about Panasonic KX-FPG376 Plain Paper Thermal transfer Fax

1 Answer

Answering message I can't figure out how to erase an old answering message and record a new one!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Panasonic Master
  • 1,346 Answers
Re: answering message

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

HP1020 fax answer phone etc

Digital answer phones record the message on a memory chipset in the same way old tape machines did using a magnetic support. Quality can only be improved by the technology itself, problem is with your specific machine.
If you have a broadband filter try replacing it.
Test the machine on a different phone socket and see if it makes any difference.
Check on your answering machine settings, you should find an option to control volume.

Aug 21, 2008 | HP 1040 Plain Paper Inkjet Fax

1 Answer

How do I delete a recording on my JNC Digital Recorder?

I'm not sure about that particular model, but usually you can press ERASE as the message is playing.
On some other models you have to press ERASE at the end of the message you wish to erase.

In either case, right after you press ERASE it will ask ERASE? (or FILE ERASE? ) then you press ERASE again.

Just make sure to experiment a bit so you don't erase a wrong and important recording by mistake.
I don't believe it can be recovered.

May 25, 2011 | Fax Machines

1 Answer

I have a Uniden cordless answer machine,Can my meesages be retived?

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message.
  1. Call your telephone number.
  2. During the greeting message, press 0 and enter your PIN code. By default, the pin code is "80" without the quotes.
  3. The answering system announces the current time and the number of messages stored in memory. Then you hear "To play incoming messages, press zero two. For help, press one zero".
Available commands are:

  • 0 then 1 Repeat a Message
  • 0 then 2 Playing Incoming Messages
  • 0 then 3 Skipping a Message
  • 0 then 4 Deleting a Message
  • 0 then 5 Stop Operation
  • 0 then 6 Answering System On
  • 0 then 7 Memo Record/Stop*
  • 0 then 8 Greeting Message Record/Stop*
  • 0 then 9 Answer System Off
  • 1 then 0 Help Guidance

Jan 23, 2011 | Fax Machines

1 Answer


MEMORY IS FULL / SEE MANUAL (alternating messages)
The memory is full. You may have too many messages recorded in the answering machine. To erase messages, see below. This may occur during fax reception if too much data is received before the pages can be printed out. If faxes have been received to memory because printing is not possible (an additional message will indicate the problem), resolve the problem so that printing can continue (see Substitute Reception to Memory on page 66). If you are attempting to transmit from memory, see If the memory becomes full on page 57. If you are copying, see If MEMORY IS FULL appears on page 67.

Erasing received messages:
It is important to erase received messages after you listen to them to ensure
that the memory does not become full.
? Erasing all messages: To erase all messages, press FUNCTION, DELETE, and then START/MEMORY.
? Erasing a single message: To erase a single message, press DELETE while the message is being played.

If the memory becomes full while the document is being scanned, MEMORY
IS FULL and SEE MANUAL will alternately appear in the display.
? Press START / MEMORY if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up.
? Press STOP if you want to cancel the entire transmission.

Nov 25, 2010 | Sharp Fax Machines

1 Answer

Recording a greeting


You need to be in Tam fax mode firstly.

1, {#} {0} {0} {1}:= “TAM/FAX” (default)

Press {RECORD} repeatedly to display “TAM GREETING”.

Press {SET}. A long beep will sound.

Speak clearly about 20 cm ( 8 inches ) away from the microphone.

The display will show the remaining
recording time.

5 When finished recording, press {STOP}.
The unit will repeat your message.

To erase and start again

Tam/fax mode again.

2 Press {ERASE} repeatedly to display “TAM GREETING”.

3 Press {SET}.

To cancel erasing, press {STOP}.
4 Press {SET}.

should be good now.


Apr 24, 2009 | Panasonic KX-FPG376 Plain Paper Thermal...

2 Answers

Cannot go back to default greeting message

According to the Operating Instructions for this machine, chapter 7.1.1. says that by erasing your recorded message, the machine should be set to play the pre-recorded greeting message again. And I guess you can then go on and try to record a new message, hopefully it will be more successful this time. I don't have this machine myself, but I wish you good luck!

Jan 03, 2009 | Panasonic KX-FPG376 Plain Paper Thermal...

1 Answer

KX-FT67 new settings

just errase all msgs or off it from settings .just off answering mian jee

Dec 15, 2008 | Fax Machines

1 Answer

TAD erase and record greeting message

Just record a new one, it will overwrite the previous message

Sep 27, 2007 | Fax Machines

Not finding what you are looking for?
Panasonic KX-FPG376 Plain Paper Thermal transfer Fax Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Fax Machines Experts


Level 2 Expert

166 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Panasonic Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides