Question about Sunbeam 4816-9 Food Processor

3 Answers

Sunbeam Food Processor/Le Chef 14-11, 14-1A

This is great food processor that my mother-in-law pass on to me. I have all the attachments but no instruction manual. Is there an instruction manual online or please guide me as to where I can purchase one?

I also need a replacement for the main bowl which holds the food but I manage a way to make it work until I can find a replacement.

Posted by on

  • 3 more comments 
  • Anonymous May 02, 2008

    the safety defeat rod is broken. you can make it work by moving the container off center and using a pen to depress the rod, but it is akward and less safe. a better answer is out there. anybody?

  • trippie Sep 01, 2008

    I have lost my users manual and don't know how to put the food processor together.

  • Anonymous Nov 01, 2008

    I have just been given the 14-11 Le Chef food processor and need the book as well as 2 shafts for the shredder plates as they have stress cracks in them. The bowl could be replaced also. Where can I find these parts.

    Sue

  • Anonymous Mar 13, 2014

    I cannot unlock/remove the bowl from the food processor. There is no "Unlock" arrow and nothing about it in the instructions booklet.

  • Anonymous Mar 24, 2014

    i have a hand-me-down binatone FP 701 food processor and the instruction manual has been lost.

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,336 Answers

Check this website: //http://www.householdappliance.com/food_processor_parts.html

Posted on Jan 21, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Looking for the slicer part for the Sun Beam LeChef food processor. H E L P .................. this is an older model.

Posted on Oct 05, 2010

  • rmadera Nov 11, 2010

    I have a Sun Beam LeChef food processor and accessories. The bowl is cracked, but I've been unable to find a replacement, so willing to donate parts to a fellow foodie. E-mail rhmadera@yahoo.com if interested.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

There is a Sunbeam LeChef food processor book on Ebay see item 270266137694

Posted on Jan 01, 2009

  • Turtlewalker Jan 01, 2009

    There are Sunbeam Le Chef food processor parts and book on Ebay see item 270266137694 in Ebay Store tablescraps01

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Sunbeam Food Processor/Le Chef 14-11, 14-1A

My mom gave me her Le Chef that had several cracks in the handel and also the place where the handel attaches to the bowel with a screw was broken. I Used Loctite super glue for the crackes in the handel and a loctite epoxy putty that can be molded into the shape needed to fix the place where the screw attaches the handel to the bowel. After the putty set I sanded it to refine its shape and matched the screw hole in the bowel with the handel then drilled a small polit hole in the handel. I slipped the handel into the slot in the bowl and attached it with the screw and now I have a good as new Le Chef.

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parts sunbeam 14021


Found several Sunbeam parts on eBay.

Dec 26, 2013 | Sunbeam Food Processors

1 Answer

I have a new Sunbeam food processor LC6950 and the blender goes well but can't get the food processor to go. It is correctly together. How to switch from one to the other, please


To use the Food Processor just remove the blender and replace it with the Upper safety cover. This will deactivate the blender switch and allow the food processor to function.

Oct 17, 2013 | Sunbeam Food Processors

1 Answer

How to disassemble the Sunbeam Oskar processor to wash.


Ours is hard to remove, too. I just hold the base with both hands, then put my left thumb and right index fingers on the parts of the bowl where it attaches to the base. Then push it, if I remember correctly, clockwise. This works far better than gripping the entire bowl.

Jun 30, 2010 | Sunbeam 4817 Oskar Food Processor

1 Answer

Looking for a manual and replacement parts for a Sunbeam Le Chef model # 14021 Food Processor .


you can post this item usually on Ebay or search engine on the internet of a pdf file might be a small charge , if you need it mailed instead...>^.^<

Mar 19, 2010 | Sunbeam Food Processors

1 Answer

I acquired an old Sunbeam Food Processor Le Chef without a users manual. How could I acquire one.


I was not aware that they came with manuals.. you might try talking to chefs or restaurant owners,i.e. other people in the field of food processing.

Sep 12, 2009 | Food Processors

3 Answers

Sunbeam Food Processor/Le Chef 14-11, 14-1A


My mom gave me her Le Chef that had several cracks in the handel and also the place where the handel attaches to the bowel with a screw was broken. I Used Loctite super glue for the crackes in the handel and a loctite epoxy putty that can be molded into the shape needed to fix the place where the screw attaches the handel to the bowel. After the putty set I sanded it to refine its shape and matched the screw hole in the bowel with the handel then drilled a small polit hole in the handel. I slipped the handel into the slot in the bowl and attached it with the screw and now I have a good as new Le Chef.

Jun 23, 2008 | Food Processors

1 Answer

Stuck sunbeam blade on spindle


Put some water in it and run it for a minute or so. That helped me with the same problem on the same processor.

Aug 12, 2007 | Sunbeam 4816-9 Food Processor

Not finding what you are looking for?
Sunbeam 4816-9 Food Processor Logo

4,724 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Food Processors Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

eyecam

Level 2 Expert

95 Answers

dwood429

Level 1 Expert

12 Answers

Are you a Sunbeam Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...