- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depends on how the battery has been cycled. If you charge it for 8hrs or until its full and you stay on it until it's discharged all the time. It will burn it up fast. Also if you charge it and then use it while its on the charger and hardly ever take it off, that battery will eventually learn that cycle and it wont last 4 hours. It's best to fully charge it and have an extra as you can switch between the two around 25% battery left. I would replace it and start fresh. You can also turn off all applications that are running in the background as they will eat alot of power.
I could not find a application support disk, but I assume you are looking for the drivers. Your laptop is made by Medion. I have the same model . I found the sound card drivers here. http://www1.medion.de/downloads/download.pl?id=5561&type=treiber&filename=skwim2140_2170vst.exe&lang=uk
For the rest I used software called “Everest Home Addition” to get the model numbers of each device and googled the drivers for each one.
You can fix it by doing this. but first you need to make sure you leave your house for at least 4 hours so you don't have to be hearing that frigging noise, IT CAN BE DONE! i fixed it.
my unit would start beeping as soon as I plug it in wall, and red light come on, the software is telling me the battery is unplugged
this is what i did in order.
1. unplug all cords, connected to the unit, and power cord to the wall.
2. hold the power button
3. still holding the power button, Connect it to wall. (red light would be on but no beep)
4. I watched TV for 6 hours, red light still flashing
5. disconnect from wall
6 connect back to wall
I heard the unit click one time and green light came on, is charging now....
you see doesn's the password you created. it needs a passphrase created by the router.
it looks like this
when you set-up your router on your pc try to save the
"wireless security information"
by copying it and paste it to a notepad or where you could put it.
ok? hope I helped you ^.^
hit and hold these keys in order CTRL-ALT-Delete. Chose the Task Manager in the new window that pops open. There are four tabs - Applications, Processes, Performance, Networking. Make sure process is chosen. Click on where it says "Image Name" so everything is in alphabetical order. Seach for a process that aludes to your keyboard (magickeyboard.exe or such). Right click then "End Process". Now uninstall.
Unfortuneately I don't know the name of the specific process it is runningso take your best guess.
Don't fret if you think you messed up anything, when you reboot, everything comes back!!
Other ways to try things including the Windows boot file, this is just the easiest and usually works...
Not sure how this issue is related to UPS devices... How strange.
At any rate, it sounds like your system does not have the appropriate sound compression/decoding codecs installed at the moment.
What software are you using for the chat? That is vital information to solving your particular issue.
Otherwise, I would install a codec package that will most likely
contain any and all compression formats you would need to run most
My recommendation would be to download K-Lite Mega Codec Pack and
install it. Reboot if necessary and see how it works then. Also make
sure that the correct sound device is selected as your primary or
secondary sound device as needed.
Here is the codec pack:
I almost suspect that you're using Ventrilo or TeamSpeak. It sounds
like an error I once received. If that is the case, you are able to
change the audio compression formats in the menus if I remember
correctly. Perhaps the sound compression format was changed by
accident at one point? Change it back to the default one if you can
figure out which one that is. I don't recall at the moment what it
was, nor do I have it installed. (I'm used to running the SERVER side
of it. Not the client side.)
Please try this first. Do not rate me until we arrive at a solution.
Please remember that you did not provide enough information for me to
base a solid solution on.