Question about Bestec (ATX100-5) (ATX1005B) Power Supply
My HP Pavillion wit win 98 restarts after every shut down. I did some experimenting and found that if I remove the network card the system operates normally. It does the same thing if I install a new different network card.
Could this be an indication of a failing power supply???
Indication of a failing power supply??? I dont think so.
more like a driver is corrupt or better yet have the on board nic card set to turn on, is there a plug that has wire attached to the nic card, unplug those and see what happens.
Posted on Jan 21, 2008
Tips for a great answer:
Test all leads that attach to your hard drive IDE,SATA and power leads
the leads from your (motherboard to your hard drive) make sure they have secure dust free connections and are not faulty or just replace them they might be faulty
if its a 40 pin flat ribbon type it will be the first to fail
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty
even something as small as an electrical fan and its lead can cause you problems
computers need all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error
make sure your graphics card is securely seated with no dust built up or in the socket
if you remove your graphics check the socket to make sure its dust free
restart your computer then reinstall it this should activate found new hardware wizard
hope this helps
Jun 26, 2012 | HP ATX-300-12Z (ATX30012ZBD) 300-Watt...
Mar 23, 2011 | HP Bestec ATX-250-12ZD 250w HP Pavillion...
Oct 07, 2010 | HP Bestec ATX-250-12ZD 250w HP Pavillion...
May 25, 2010 | Dell POWER SUPPLY Power Supply
Apr 29, 2009 | HP Bestec ATX-250-12ZD 250w HP Pavillion...
Apr 01, 2009 | HP System Power Supplies
Dec 21, 2008 | Packard Bell (190169) Power Supply
Jan 17, 2012 | Bestec (ATX100-5) (ATX1005B) Power Supply
175 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: