Question about Hotpoint TDL14 Electric Dryer

1 Answer

Hot point tumble dryer TL61

Which termanals do the wires on the timer go onto just clean it out cannot remember what way they go back

Posted by on

  • MINWISE2002 Feb 15, 2009

    HOW TO FIT DRIVE BELT

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Need the whole model number to get you the wiring diagram

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm trying to replace the timer on my hotpoint tumble dryer an I can't remember were all 10 wires go please help


It's always best to leave the old timer connected, then get the new one and move the wires one at a time from the old timer to the new. If you didn't do that.....

I don't have your model number - if you look for that - on the door or the back - maybe we can point you to the diagram. Let us know.

Sep 17, 2016 | Hotpoint Dryers

1 Answer

The wiring to my hotpoint tumble dryer


You would have had to disassemble the dryer to replace the belt, so the video was correct. The door switch assembly wiring at the front of the dryer mates with a matching connector which you would have separated for cabinet removal. Don't know why you messed with control panel wiring for belt replacement but you can go to www.repairclinic.com and enter tcym 750c to see a list of common replacement parts and maybe a video showing disassembly of a generic Hotpoint dryer. You might be able to get an answer to your wiring question.

Aug 10, 2016 | Hotpoint Dryers

1 Answer

Hotpoint tcym 750c tumble dryer serial number tcym750c6p. The wires attached to the timer control and start button have disconnected does anyone know how they go back on?


images for Hotpoint tcym 750c tumble dryer wiring

Hotpoint TCYM 750C Style - YouTube

? 3:07
https://www.youtube.com/watch?v=RjQMN6U4PdE
Oct 8, 2012 - Uploaded by Missing Sleep
Hotpoint TCYM 750C Style. Missing Sleep ... How to replacetumble dryer belt Hotpoint, Indesit, Ariston, Creda, Proline etc - Duration: 9:36. by ...

Hotpoint tcym 750c tumble dryer serial number tcym750c6p ...

www.fixya.com/.../t25992053-hotpoint_tcym_750c_tumble_dryer_seria...
48 mins ago - SOURCE: Reconnect wiring on a Hotpoint VTD00 tumble dryer. most electric dryers have a wiring schematic on the back or inside on the back ...

Dec 03, 2015 | Hotpoint Dryers

1 Answer

How do i replce belt on hot point tvm572


Hotpoint tumble dryer not turning? How to replace a Hotpoint tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Dec 27, 2013 | Dryers

2 Answers

My dryer is not getting hot. The clothes tumble, but do not get dry because the dryer is not getting hot. Could it be the thermostat or something else?


First, check the venting to make sure it isn't stopped up with lint. This is the most typical case. Also, which you probably already have done, make sure the lint screen is clean. You may have to disconnect the flexible hose on the back of the dryer to clean your vent.

Apr 12, 2011 | Maytag Dryers

2 Answers

Kenmore HE Dryer not blowing hot air


I have a gas kenmore dryer... the drum runs- it blows air and for just a few minutes warm air but after a few minutes the air is cold. I have cleaned the vent checked it good. I didn't see the fuse on the back I have the bottom latch open and see several wires that can be disconnected; snap together.

Mar 10, 2010 | Kenmore 63942 Dryer

1 Answer

Is not getting hot.have cleaned the lint basket and pulled the basket holder and cleaned behind it. still not getting hot. could it be the heating element?


Deffinitely the next thing I would test. If it is tumbling and the timer is working, save having a wiring issue, which is highly unlikely, it probably does need a heating element.

Dec 07, 2009 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

No heat in tumble dryer


The heating element have got old and brittle over time and finally gave up the ghost. But it is not always the element. It could be one of the safety Hi-limits have blown. All parts of the dryer will have continuity if its working properly. Test for continuity by using a meter set on Ohms,or use a poor man's meter. You can make your own poor man's meter by using an ordinary flashlight . Break the circuit in the flashlight and add a couple of wires to it so that you can make the light come on in the flashlight, that's right hot wire that flashlight. When the bulb lights up you have a circuit! You now have a poor man's meter. The next step is to check each little gizmo on the dryer that the wires attach to. All the limits attached to the side of the heat element, the door switch (when door is closed) etc.should have continuity (closed circuit)(the light should come on in the poor man's meter) If you come across an thing near the blower housing with 2 wires attached to it, that is a thermal limit, a safety or a control thermostat (So as not to get a false circuit you need to remove one of the wires to each thing you check) Look for lint buildup or blocked vent going out the house. If everything is good and you have paid the electric bill, then the timer could be bad.

Oct 06, 2009 | Dryers

1 Answer

Dryer won't shut off at end of cycle


First of all if you want heat it's probably a burnt up thermal fuse due to lack of air to the dryer. But if the timer is getting stuck you'll just have to replace the timer. Theres no way of fixing the timer just replace it and then replace the thermal fuse (it's located on the back of the dryer) and you should be up and running also have the ducting cleaned out.

Please remember to unplug the dryer before working on it.

Hope this helps
Jason

Mar 31, 2009 | Whirlpool LER5636P Electric Dryer

1 Answer

Keeps on cutting out on Hot drying cycle


this will be a problem with your thermostats 1 of them will have a thermal cut-out switch built onto it this thermostat needs replacing it is faulty

Dec 07, 2006 | Zanussi TC7114W Electric Dryer

Not finding what you are looking for?
Hotpoint TDL14 Electric Dryer Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dryers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Hotpoint Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...