Question about Soltek SL-KT600-RL Motherboard

2 Answers

SATA I have bought myself a new WD 250g SATA drive and connected it to my motherboard. (Soltek SL-kt600-R) For some reason it doesn't show in the bios or while booting up. The most updated bios that I could find was 2004. There is only one SATA option in my bios. (Onboard SATA-IDE) The only options that I have is "disabled" and "RAID". Once I exit the BIOS, the next screen will display Serial_CH0 and Serial_CH1 - "No device" I have also tried to load the drivers while booting the Windows setup using the F6 function. I can load the SATA drivers from the disk that I got from my packaging, but Windows Setup only displays the "Cannot find harddrive etc....." What can I do? Please. I need help ! Much appreciated.

Posted by on

  • Cobus_O Jan 21, 2008

    There is definitely power to the SATA drive. If I connect a SATA "add-on" card to the pc, the drive shows within the RAID setup screen.....but I'm only using one SATA drive - no RAID available.

  • Cobus_O Jan 21, 2008

    It says on the hdd that there is no need to set any jumpers for the master / slave mode. I have both SATA 1 and 2 connectors on the motherboard. In what way do I set the jumpers on the WD harddrive to support SATA 1?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 176 Answers

Is posible that u're motherboard does not support sata II (i presume that the drive is )

if that's the case, u'll have to set the jumpers on the drive to work in sata I mode ....

if u have more sata drives, check if they both are working in the same SATA mode (I or II), some motherboards can't work with both SATA standards at the same time ...

Posted on Jan 21, 2008

  • Cisf Jan 21, 2008

    there is no master / slave relation in SATA drives !!!

    usualy sata I mode is set up by connection the first 2 pins at the drive (the first 2 beeing the ones that are fartherest of the connecting cable\s ). But to be sure check the diagram that is on the top of the drive ...

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 55 Answers

Ok " your computer is telling you it doesn't see the device , I would go back and check the plug on the board and if im getting power to the sat drive.

lot of times it just bad connections.

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Soltek SL-K8AV2-R1L with one 160 gb sata harddisk (with XP on it), a 40 gb IDE harddisk on IDE channel 0, and two DVD/CD-drives on IDE channel 1. Tried to reinstall XP but XP setup did not...


Hi,

Welcome to Fixya. The first thing you need to check is if the SATA Hard Disk is detected in Bios. In the system information you will see there the list of the drives including the DVD and the IDE hard drive. You can also check the Boot Sequence or Priority if it is there. Please let me know if you find the SATA hard disk on the list.


Thanks

Apr 15, 2011 | Soltek SL-K8AV2-R1L Motherboard

1 Answer

Hello.when to install win xp ,not instal and i have problem for sata HDD and i can`t install windos and restart my computer! how solve this problem?? sorry for bad type english language!


You have to go into your bios and make sure your cd drive is the first boot device. If you dont, your motherboard will continue to think it needs to boot from the hard drive.

Mar 20, 2011 | Soltek SL-KT600-RL Motherboard

1 Answer

Locating Driver download - Soltek Motherboard model code SL-65KIV


Hi, "I did some research for you; click on this website, you may find the "Drivers" that you need. "Thanks for using Fix' Ya, let me know how that worked out for you by giving a "helpful rating." Your time is appreciated, I hope mine is too!" http://soltek-sl-kt600-c1l-ar1-7l-bios-driver.downloadaces.com/

Jul 10, 2010 | Microsoft Computers & Internet

2 Answers

SOYO KT600 Dragon Plus mobo not recognize WD Caviar SATA 1TB HDD


Yuck! Soyo filed for bankruptcy in May and their website is gone!
You need to enable the SATA in the rom bios AND install the drivers for it; but, I hope you have the manual and the CD.

Jul 05, 2009 | Soyo Computers & Internet

1 Answer

Soltek sl-k8trpro939, error message BIOS not Loaded,


To clear cmos you'll need to remove the cmos battery from the motherboard for about 5-10 seconds then replace. You need your motherboard disk in order to load the bios. If you do not have this disk then you will need to go to the board manufacturer's website & download the bios. Follow the directions they have at the site to make a bootable disk & then boot from this disk. Hope this helps & please remember to rate my answer. Thanks.

Jan 25, 2009 | Soltek SL-KT600-RL Motherboard

1 Answer

SL-KT600-C1L Motherboard


unfortunately soltek has gone out of business, so you can no longer find the manual.

Oct 21, 2008 | Soltek SL-KT600-C1L Motherboard

1 Answer

Missing driver raid


I have the Soltek SL-865Pro-775 motherboard and the driver CD that came with it when I built my computer. If youneed any of the drivers, let me know. teledrew@yahoo.com

Jun 20, 2008 | Soltek SL-865Pro-77 (SL-865PRO-775)...

2 Answers

Drivers for Soltek Motherboard


Hi there

I was wondering have you tried www.driverguide.com
Its free to register, but abit of a apin with advertisement, but you should beable to find some drivers there.

Thanks

matty_boy

Jan 15, 2008 | Soltek SL-65KV2-T Motherboard

3 Answers

Wd800jd sata hard drive not recognized in bios on boot up


Hi, A couple of ideas: 1. There are 3 versions of this motherboard: Dragon Plus, V1.0 & V2.0, perhaps your BIOS needs an update to be able to recognize the new HD. This of course would require flashing; 2. There are two variations of a WD SATA hard drive: Serial ATA amd Serial ATA II; 3. Re Jumper settings: the eight-pin jumper block is only used to enable power management on the drive. There are no master/slave settings since there is only one drive per cable; 4. If you are fresh installing Windows on it, you need to press F6 when asked by the Windows Installer and follow on-screen instructions. Hope this be of some help/idea. Post back how things turn up or should you need further information.

Sep 17, 2007 | Western Digital Caviar SE WD800JD SATA...

Not finding what you are looking for?
Soltek SL-KT600-RL Motherboard Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Soltek Computers & Internet Experts

clar4444

Level 1 Expert

3 Answers

David
David

Level 3 Expert

781 Answers

Paul Bade

Level 3 Expert

1606 Answers

Are you a Soltek Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...