Question about E-Machines T2682 (000002965) PC Desktop

1 Answer

E-machine t2682 desktop

My pc wont turn on at all i bought a new power supply and put it in but it still wont work i also made sure my power button was connecting to the power supply and it is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,067 Answers
Re: e-machine t2682 desktop

Cpu setting in good jumper on mobo set on 1 2 pin not 2 3 for reset ? could be bad mobo what socket mobo do uuusse

Posted on Jan 21, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The power light is on at half light, pushing the power switch has no effect. after removing the power cord and reinstalling it the power supply fan starts but stops. removal of the internal battery and...

I alway regret taking my sister in laws broken E machine.
She had something similar that prevented it to turn on. I was alway wondering it that 3 stem chip at the center of the board was a power on electronic switch When you turn on the machine this little thing would electronically close to complete the circuit.
But I never tooke it and never experimented...

Jul 28, 2009 | E-Machines eMachines Desktop PC

1 Answer

EMachine 2862 Desktop Dead On Power-Up

check all the leads to the hard drive and check that the fan starts spinning when you switch it on if it dont start then the problem is the switch these do often go and can be easily replaced and they are not expensive i had the same problem and found that it was just the switch hope this solves your problem for you you can bypass the swith so that the computer comes on when you turn the plug on but when you shut down the computer this shuts everything down but the switches are cheap enough to buy if you have changed the power pack then the only thing it can be is switch .................................

Oct 31, 2007 | E-Machines T2682 (000002965) PC Desktop

1 Answer

Nothing hooked up to usb ports but computer tells me power surge

umm, usually you can't. your board is probably feeding too much current/voltage to the usb ports or someone shoved a paperclip into the port and shorted it out (frying the power supply to the usb ports) in any case, you will probably need a new motherboard or power supply.

May 26, 2009 | E-Machines T2682 PC Desktop

1 Answer

My external cabinet fan is not working ;it revolves only in the starting after that it doesn't revolve i changed it's power supply wire also but no use  i think it is having problem with the conducting...

Sorry. I see you provided the information, eMachines T2682. Their website does not provide service manuals, but you can ask eMachines if the fan is thermally-controlled by sending them eMail at

It appears that eMachines withholds a lot of information, hoping to sell you additional support services, so this information might not be provided unless and until you pay them for it.

Apr 09, 2009 | E-Machines T2682 (000002965) PC Desktop

1 Answer

T2682 power up, just get fast blink on front panle lights.

prb a bad mother board ... look on ebay for a used or new motherboard

Mar 28, 2009 | PC Desktops

2 Answers

T2893 e machines wont turn on

Since you are looking inside, try this. Trace the wires that come from the power switch back to the Motherboard. The wires from the switch will connect to two pins on the motherboard. Carefully jump those two pins with a screwdriver and the machine should turn on. I would suggest doing this with all drives and cards unplugged first.

Jan 15, 2009 | E-Machines (T2824) PC Desktop

1 Answer

Emachine T2682 boots then dies

Nope, if the fan on any of the equipment stops, then its a power problem. Hightly suspect the motherboard is at fault loading down the power supply and even possibly burning out the power supply. I've seen it happen to many times.

Feb 23, 2008 | E-Machines T2682 (000002965) PC Desktop

2 Answers

E-Machines 2862 Dead On Power-Up

I believe that the front button is not connecting to the switch for the power supply. Also make sure all internal connections are secure. Sometimes the button breaks from behind so that it cannot contact the switch. Let me know if it helps. There are other solutions if you tried this one first. 

Nov 01, 2007 | E-Machines T2682 (000002965) PC Desktop

Not finding what you are looking for?
E-Machines T2682 (000002965) PC Desktop Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides