Question about ASUS P4P800 SE (890552603657) Motherboard

1 Answer

Installing mother board without a manual

I have a P4C800/P4P800 series motherboard i cannot work out were the wiring goes without a manual

Posted by on

  • jimjam1 Jan 21, 2008

    HI!, We are a group of senior citizens,(average age 72 )that are going to bulid 10 computers to send to a school in East Timor.The cases ( Ultrix/Atrix High End) were donated to us along with a number of Motherboards etc etc.The Boards are not new and in this case we have more connection wires than we know what to do with.I`m hoping the user guide can help solve the problem.We don`t mind paying for help,but expense must go before a committee and that takes time.More time than some of us may have, thank you once again for your help . jim mcneilly

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 29 Answers

Here is a link to the ASUS download website:

http://support.asus.com/download/download.aspx?SLanguage=en-us


In the upper left corner, you will need to enter either p4c800 or p4p800 and in "select category" highlight "Manual".

Hit search and it will bring you to all of the versions of that motherboard. Select yours and it will bring you to the manual download page. There are lots of options, just make sure you get the right language and you are set to go!

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Download ethernet controller drivers for p4p800 se asus mainboard


Go to the follwong site and follow these steps: -
http://support.asus.com/download/download.aspx?SLanguage=en-us

1. Select Product - Mother board
2. Select Series - Socket478
3. Select Model -
P4P800 SE and click search, it would ask you for operating system
4. Select operating system and download drivers


Hope it helps!
CreativeTECH

Nov 22, 2010 | ASUS P4P800 SE (890552603657) Motherboard

1 Answer

MAX AMOUNT OF MEMORY FOR THE FOLLOWING MOTHER BOARD - ASUS P4P800 AI SERIES MOTHERBOARD, ALSO WHERE CAN I GET A PRINTED COPY OF MANUAL?


max amout is 4GB,,,depend of your bios system configuration,maybe u should update ur cmos,and you can plug ur RAM until 8GB...

Jan 15, 2010 | ASUS Computers & Internet

1 Answer

Does ASUS P4P800 deluxe support high density memories


Here is a link to Asus' Qualified Vendor List of RAM modules for your motherboard. I do not see it mention high density RAM. You would need to search the specs on the modules recommended to be sure.

ASUS QVL

In case you don't have the manual, here is a link for it too:

ASUS P4P800 Deluxe Manual

Memory info begins on Page 2-10. Again, there is no mantion of HD modules.


Mar 01, 2009 | ASUS P4P800 SE (890552603657) Motherboard

1 Answer

P4p800s-x


for P4C800 series

http://www.asus.com/products.aspx?l1=3&l2=12&l3=30

for P4P800 series

http://www.asus.com/products.aspx?l1=3&l2=12&l3=31

Jan 09, 2009 | Computers & Internet

1 Answer

Wiring off the tower


The 2 grey wires with the 4 pin connectors would be for the USB ports at the front of the tower. They need to be connected to the motherboard usb pin outs. Usually marked on motherboard as "USB1", "USB2" etc. Generally the red wire should be the "power" and goes to pin1 or 2 on the connector. Pin 1 is normally marked by a thick line on the board at that end of the connector, but it's easier to say Pin1 is the opposite end to the single pin on it's own (which isnt used). You really should check the manual for the board to confirm the connections though.

Jan 03, 2009 | ASUS P4P800 SE (890552603657) Motherboard

2 Answers

I want to upgrade cpu on mother board p4p800


*********** board supports upto 3.2 GHz+ P4 CPU

Dec 03, 2008 | ASUS P4P800-E Deluxe Motherboard

1 Answer

Ram capacity


This motherboard supports RAM upto 8 GB but 32 bit Operatin system give support 4 GB. To know more about the mobo follow the link below

http://www.asus.com/products.aspx?l1=3&l2=12&l3=30&model=175&modelmenu=1

Jul 04, 2008 | Intel ASUS P4C800-E Deluxe 875P Socket 478...

1 Answer

Pluging in extra usb ports/Mic and headphone jacks from the tower


Answer me this. You're case is an Antec tower? The motherboard is the Asus P4P800 SE ? Is this correct?
If you have you're manual you can see what goes where on the board for front panel connector page. 2-31. (This diagram shows you how to connect the front mic & speaker).
To connect the Antec's front USB ports plug the case USB front connectors onto USB56 & USB78 shown on page. 2-30. Most case wires are already set within their USB connectors & the Antec's front USB connector should fit right on the mother board's pin's. If you need you're user manual, download from Asus by clicking on this link. http://support.asus.com/download/download.aspx?modelname=P4P800%20SE&SLanguage=en-us

Good Luck!
Mike

May 19, 2008 | ASUS P4P800SE Motherboard

2 Answers

Mother Board connection


Go to the site below. Its a manual for the 800/i65GV group. Go to page 67 and zoom in. You'll get a nice look where everything goes. Two rows of pins. Upper row and bottom row. Real close to each other. Do not place connectors up to down. Connect only left to right.
The reset connector has two pins. One will be white or black. These are - grounds. So connect it to the bottom row onto the most right two pins. Moving to your left. Skip one pin. Take the Power Switch a two pin connector. Remember Black & White is ground & ground goes to your right for both rows of Mb pins.
http://dlsvr03.asus.com/pub/ASUS/mb/sock478/p4p800/e1324_p4p800.pdf
Go to IDE_LED next. Its the last two pins towards your most left of the bottom row of pins. Move to the upper row & the power LED. Same as the bottom row keping the grounds to your right. Lastly is the speaker. Its connector holds four pins but you only use two. One in each end.

Good luck & please vote....

Dec 22, 2007 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

Not finding what you are looking for?
ASUS P4P800 SE (890552603657) Motherboard Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...