Question about RCA F36649 36" TV

2 Answers

No picture, sound ok

A few weeks ago I noticed that it was taking awhile for the picture to come on. Remote was changing stations, sound level, but no picture, black screen. Then it came on. This was happening more and more, then this morning, the picture never did come on. I turned it off and on a few times. Then decided to just give it a break. So whenever I go by the tv set, I turn it on to see if the picture comes in. But it hasn't. Any suggestion would be greatly appreciated.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: no picture, sound ok

My tv was working fine last night. but this morning when i truned it on it had sound but no picture tryed everything noting will work.please help?

Posted on Oct 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • RCA Master
  • 8,617 Answers
Re: no picture, sound ok

Rca has been known to have bad solder joints in the deflection circuits. Usually around the flyback and transformers.. check it over real good. Just be careful as you can still get shocked after the powers removed the capacitors and picture tube will hold a charge in them.

Posted on Jan 21, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

We have a Samsung DLP about 5 years old. We noticed that the fan or some sort of hummning sound was coming from the back louder than normal while TV is on. Then suddenly the picture would start to freeze...

This tv have a colors wheel,hear loud motor noises,humming noises,squiling or grinding noises,have pictures black and white.All these causes are by the colors wheel is worn out, warp rubbing against it motor or fiber plastic glass briddle about to brake aparts.Don't turn this tv on anymore until,u change the colors wheel or u will damage the projection engine.The colors wheel are hard to change for amatur and hobiest.Because involved taking out many machanical parts,before even can come to the colors wheel to take out and change it.The best course to to hire a Tv do this job.The price colors wheel part and labors.Awhile back was about $500-550,now??

Sep 10, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Panasonic TV-Sound but no picture.

    According to the symptoms, There is a problem in vertical out section.Just check it there must be a capacitor that has been burst or leak.And second one reason could be the malfunctioning of vertical IC.Which is also in the vertical section.

Thanks for using fixya.

Dec 01, 2008 | Panasonic CT-27D12D 27" TV

2 Answers

Concierge Hotel TV - Volume Control

If there are no chasis numbers on the outside you may want to open the cast and check for numbers there. Then you might be able to google the number and find a manual. some TV's willl enter the menu or rest by pushing two buttons at once on the set. This could change your channel selection however.

Nov 14, 2008 | Standard (CRT) Televisions

1 Answer

Delay to see the picture

Your power supply is going south, I have an old sony with the same problem. The voltage level drops and does not have enough 'kick' to start. It will work better when it is warm. The module will need to be replaced.

Nov 29, 2007 | Sony KV-27XBR45 27" TV

1 Answer

Picture and Sound disappear after a few minutes

Practice visual acuity technique! Look for bad solder connects==none found?? suspect flyback xformer.

Sep 26, 2007 | RCA F36674ET 36" TV

2 Answers

Sound, but no picture. Standby light blinking 5 times

A few weeks ago my set started flashing to a black screen. Now a couple of weeks later, i have no picture, but the set turns on and i have sound. The standby light is flashing. I purchased the set in 2000 so it is seven years old. This is the first problem. Could it be all three of the bulbs? Could it be all three of the bulbs? no as you say that sound is ok that means your power supply &high voltage section is ok. please check chroma ic luminance section or system control section stand by ckt ihanks

Sep 11, 2007 | Sony KP-53HS10 TV

1 Answer

Re: Sony KV-24FS120

your problem in system control ic section related to stand by pin check ckt related to stand by section in remote ic check power to system ic loose coniact in remote or system ic thanks

Sep 09, 2007 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Philips wide screen 32in Digital TV

You probably have a component breaking down on one of the circuit boards. It would have to be checked out to find out which one. Stargazer

Feb 13, 2007 | Philips Magnavox 20MT133S 20" TV

Not finding what you are looking for?
RCA F36649 36" TV Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides