Question about GPX TVB544 5 in. Portable Television

1 Answer

The radio works but the CD does not

When I switch the button to CD player...nothing works. It does not spin.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers
Re: The radio works but the CD does not

Hi Could be a bad selector switch, try jiggling it back and forth to see in it works in an in between position. Possible loose power connector to the cd player or cd is faulty. Jay

Posted on Jan 21, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

NAXA NPB 241 CD player has a spring just laying in there, trying to find out where it's supposed to go.

back right corner once you pop the top. there should be a little plastic hanger there, if there is not, it may have broken off. the spring attaches there and then there should be a small opening that it feeds down into and attaches to another hanger

Jul 24, 2014 | Naxa NPB-241 Portable CD Player, AM/FM...

1 Answer

What do I need to connect an old TV with only one output on back to a TWC cable box, DVD Player, VCR and a Play Station?

Just connect the PS3 it also works as a DVD player. Do you really need a VCR player? You can get a converter box to stream the VCR footage through the DVD player/ PS3

Aug 06, 2012 | Portable Televisions

1 Answer

Hi i have an alba tv , im trying to connect a dvd player. I have connected the scart leads etc.I can not get onto the av channel so i can watch a dvd. Please help


Firstly, please make sure you have connected the SCART cable correctly. This should be connected to a SCART OUT socket on the DVD player to one of the SCART IN or EXT sockets on the rear of the TV.

If you have correctly connected the SCART cable the TV should automatically switch to the AV channel when you switch the DVD player power on or insert a disc.

Switch your TV on, then switch the DVD player off and then on again. If the TV does not change to the AV channel you may have the SCART cable connected incorrectly.

Not all TVs automatically switch to the AV channel when the AV device is switched on. On some TVs the AV input is on channel 0 or 99. On other TVs the AV input is not assigned to a specific channel. On these TVs you need to look for a button marked "AV", "INPUT" or "SOURCE" - either on the TV remote or on the buttons on the front of the TV. The easiest way to do this is to insert a disk into the DVD player and start it playing. Then press the "AV" "INPUT" or "SOURCE" button (whichever one you have) repeatedly until you find the signal from the DVD player.

Please check your connections and try using the "AV" "INPUT" or "SOURCE" buttons. If you are still unable to watch your DVD player, please post back with the following information:

1. Model number of the Bush TV
2. Brand and model number of the DVD player
3. If you are using any remote other than the ones supplied with the TV or DVD player, the brand and model number of the remote.

I will then be able to tell you exactly how it should be connected and which buttons (if any) you need to press to access the AV channel.

Hope this helps. Happy New Year!


Jan 01, 2011 | Portable Televisions

2 Answers

I have a Zenith H2511BT CRT television and was trying to configure DVD player but not able to find the AV option in the TV. Was looking how to switch to the AV option in the TV.

Sorry the tv is to old for us to help with the av change. I would recommend a RF modulator to hook your DVD to the Tv. If you use one of the modulators you will not need to change the input of the tv to the AV. You just turn on the DVD player and it will override the Tv signal coming from the antenna or cable. On the link below is what it looks like.

Here is a link on how they get hooked up to your TV.

You do not need to get the one from Radio Shack. You can find them anywhere even wall-mart. And you can get them as low as 10.00 at some stores

Good Luck

Dec 31, 2010 | Zenith Portable Televisions

2 Answers

Sony radio/cd/clock under the cabinet. Lost

On the right side there is a push button switch labeled "Clock". It is springloaded so you have to push it in and hold it for a couple of seconds until the unit beeps and the hour position starts to blink. The volumn up and down buttons will control the changing of the numbers up and down and PM/AM. Pushing the clock button again will change the clock to the minutes position and you cann adjust the numbers up or down just like the hours. Push it one more time will lock-in the new time. Your done.


1 Answer

Cannot get picture on my Sony Watchman TV/Radio-just standby flas

May have something to do with the switch to digital tv that occurred back in Feb.

Apr 20, 2009 | Sony Watchman FDL-250T 2.5 in. Handheld...

1 Answer

The cd player won't read any of the discs

Your cable problem I can't help with. The antenna is fairly easy... you just need to replace it with a second-hand one preferably from an old radio that is no good. Just make sure that it is the same size where it screws into the unit. The CD is the easiest part of the lot to fix, contrary to what Repair shops tell you. I don't think these people are dumb, and I don't think they intentionally try to rip us off by selling a new item instead, but I have found that cleaning the lens in the CD player fixes the problem. I buy old CD players that don't work, and within two minutes they are playing again. First try to use one of the commercial lens cleaners. I'll be really surprised if this works , though. It usually takes a LITTLE more effort than that... but that is the quick and easy way, and it's best to try that first. If it works OK, please let me know. I'd be interested to find out. If it doesn't, it means you will have to open the case, and clean the lens by hand, using a soft cloth, and what is known in Australia as Methylated Spirits, and then wipe it again with a soft dry cloth.I don't know the Yankee version of "Metho", but you should find it if you google it. If you need any more help, please don't hesitate to ask........ Please remember to rate this answer.

Dec 15, 2008 | GPX C1600 5 in. Portable Television

1 Answer

Under counter audiovox tv

You can try to unplug it then plug it in and try eject. If that don't work the it will have to be disasembled to remove the disk. it could be that the disk is not spinning up and in that case it will have to be repaired

Feb 11, 2008 | Audiovox VE920 9" ULTRA-SLIM DROP-DOWN LCD...

2 Answers

Bad Disc Error


Mar 25, 2007 | Audiovox VE700 7 in. Portable Television

Not finding what you are looking for?
GPX TVB544 5 in. Portable Television Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPX Portable Televisions Experts


Level 2 Expert

136 Answers

Cindy Wells

Level 3 Expert

4718 Answers

John Trigg

Level 2 Expert

250 Answers

Are you a GPX Portable Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides