Screen goes to power saving mode after

turn off in the settings the power saving mode.

Can you try the screen in another computer? I beleave the screen goes into power saveing mode when there is no input signal, thats what both my screens do.

Is your computer working?

The monitor has failed, it is almost always cheaper to replace it than fix it.

Hi, the Power Saving Mode, turns the screen off to conserve energy. On the remote, press Menu, and scan to Power Saving Mode. You can change the amount of time, when the Screen turn-off, the TV shut-off etc. You can set the time to (5 min) to, (never, turn-off). This should help with your problem. Thanks paul7of9

Hi erin mckinle,
That is probably it's, uh, analog power saving mode. When the screen goes black and the power button flashes, make some mouse gestures or hit some keys that would not affect anything (try spacebar). That should bring up the screen. If you think it goes into power saving mode too fast, go to Control Panel --> Power Options, and change the values. Hope this helps.

exacley what it say it makes it think its in safe mode it will turn on go green then turns in to safe mode then stayes whats wrong

Go to desktop properties>screen saver option>power option & select the turn off monitor never.

if you are using dvi connector, change to vga connector

may be your power saving option have small time .
check in control panel power option check power shemes.set it to 20 minutes.