Question about Philips Magnavox 51MP392H Rear Projection Television

1 Answer

Philips 51MP392H/17 - Red lines on the screen. When I block the red projector the lines go away and the picture is fine (aside from the color)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

You have a red drive problem or possibly a bad red tube. There are a lot of parts between the signal processor and the red tube so it is hard to say what exactly is the problem. Have a shop check it out for you. Thanks for using fixya.

Posted on Dec 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Magnavox 51mp392h/17,that now has double vision (text is double,all images) there is also green, off red colors on the picture. Please help me the tv is 6 years old. should i throw it away or get...


No.Should cost u like $300-350 for parts and labors.Get it fixed any local tv shops can fixed this problems,very common problems for DLP CRTS tubs design projection tvs Tv have a problems known as a convergence problems,it is dead.The tv convergence board it is dead,that why ur tv picture colors lines R,G,B mis alignments,have pictures colors shadow or 3D pictures look alike.The tv convergence board must have it parts replace like 2 STK convergence ICS and some or all of it resistors to fixed the convergence board to solved convergence pictures problems.

Jul 22, 2011 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Magnavox 51" 51MP392H seems not to have any reds in picture.


his is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
Also - Dull video problems...
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 12, 2009 | Philips 46PP9302 46" Rear Projection...

1 Answer

I replaced my convergence IC's and know my RED CRT is too bright.


Can you find the screen and focus block? There are six controls on it; three for focus and three for screen adjust ( brightness ).

Apr 15, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

The screen is starting to have red and green blurring


sounds like the coolant if it appears as halos. If it appears like a 3D picture its the convergence ICs.

Jan 30, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

51mp392H/17...bowing and color alignment off


Take the TV to a repair shop. It sounds like the convergence chips are bad. Be sure they change them as a pair or you'll wind up with the same problem again.

Dec 09, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Distorted picture


tv has red & blue converge problem,tried to fix it with remote by multipoint lining the t,s up didn,t help

Jan 12, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

51 magnavox projection tv-color mixing wrong


The are controls on the inside of the tv above the circuit boards for focus and to turn up intensity of the projector lamps (red, green, and blu). If you turn it up too far all three projector lamps kick off. If this happens, power off the set and turn down the lamp that you turned up. Power it back on and slowly turn the projector lamp up until the picture looks OK. You have to take off the panel on back of set to get to the controls.

Nov 19, 2007 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Red Lines On Screen of Hitachi 43FDX01B


can we see a picture of that?? I dont understand whatyour saying about the lines.. Are they differant colors or all red and do they make the pic bow?? does the pic look or have a reddish tinge to it?? is ther too much red in the picture??? Please let us know or let us see??

Apr 11, 2006 | Hitachi THE SOLUTION 3511 Projector, Mount...

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75452 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...