Question about Kitchen Ranges

1 Answer

Was cooking dinner, and in the middle of dinner, I walked away and heard a popping sound. I checked the oven and it stopped working. My husband turned the breaker off and back on and the stove top works but the oven doesn't. I am now on hold with sears, 15 minutes later, nothing!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

It sounds like the bake or broil element went bad and they will make a popping sound. Usually it is visible on the element that it is bad. You may have to measure the element. It should measure 8-30 ohms if good. If there is no visual sign and you are unable to measure elements keep oven off until a repairman comes. Please rate me after reading this.

Posted on Dec 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's wrong and how do I fix it?


The circuit breaker outside in the power panel for the stove has a bad breaker. It will be two breakers with their handles joined together by a pin so if one tripe it takes the other so 220 V is no longer present. When one, but not the other trips you only have 110 V. That's why the lights and clock still work but no heating elements.

Nov 16, 2015 | Frigidaire Kitchen Ranges

1 Answer

I was cooking dinner. Was using Kenmore oven on Broil and heard a loud pop. Everything went dead. Is my oven dead? Can it be fixed and how much would it cost? Would it be better to buy a new oven?


they dont make em like they used to anymore.. be looking under the top for a burnt wire somewhere..if the burners still work its ok if they dont. check your fusebox.. see if a fuse blew..

Mar 15, 2014 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

I'm in the middle of cooking dinner and I got a f3 e2 error and the oven locked...how do I get my dinner out? My husband is an elevator mechanic so he's handy...we turned off the breaker to quit...


That code refers to the oven temperature sensor sensing a too hot oven. I suspect what you did to quite the cleaning cycle should help once the temperature cools down the door should open. I am a little confused, did you set the oven to clean while your cooking, or did it do this on its own, or was it preset and yopu forgot it was set to clean? Your temp sensor may be going bad if it just detected a too hot oven while your cooking. If it started cleaning then it may have gotten too hot and this is the safety device to prevent it from overheating. it sounds like it is trying to self clean, its essential that you find the error code sheet, stuck in the stove or oven cabinet somewhere, also check your range settings so that it is not set to auto clean.

Jun 28, 2011 | Ovens

1 Answer

Whirlpool Super Capacity 465 oven won't turn on


My Whirlpool Super Capacity 465 oven

Mar 15, 2010 | Ovens

1 Answer

Stove control panel not working


You do not have a fuse or overload button on a Maytag cook-top. If you heard a pop, it was the touch pad on your control board blowing out.

Oct 22, 2009 | Kitchen Ranges

1 Answer

Sharp R-405k microwave stopped cooking


Well, it sounds like a bad relay. Easily fixed by a repair shop.

May 05, 2009 | Sharp R-405KS Stainless Steel Microwave...

1 Answer

Microwave Oven Panasonic NN-5560A


Chances are your Start key on your keypad has failed.

If you might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved. It's at
http://www.microwavedisplay.com/keypad_replacement.pdf

We have critical safety, disassembly, and troubleshooting info at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

It is part # A64795790AP "MEMBRANE SWITCH", it runs $46.88 and you can find it here:

If you would like to have us do this for you, we do that for $39.95 plus part costs.

We're happy to help and we appreciate your thoughtful rating of our answer.

Jun 03, 2008 | Microwave Ovens

2 Answers

Burners Blew


if you will send me your model number off your serial plate on your range will be on front open oven door or lower drawer some where and when you bought it i need to check the service bulletins before i reply but dont rate me till were done

Jan 02, 2008 | KitchenAid KESC300 Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Paul Carew

Level 3 Expert

3280 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...