Question about New Bright 384 Holiday Express Animated Electric Train Set

1 Answer

Will not run or make sounds, control panel lights are on but no response when we push buttons.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Check some of the other solutins I have posted regarding this issue, but you can check to make sure your track is getting power by using a volt meter set to DC. You should measure 10.5VDC between the tracks.

When you set the Treetop tender on the tracks and turn on the power, the tender car should light up if you have power. When you add the loco and plug in the large black cord from the Tender to the Loco, the train should light up as well. If you are getting power you should then be able to press the forward button and the train should start.

Make sure the clips on the track control box are making contact with the rails on both sides. If your getting power to the track and the tender lights up, you should be good to roll.

Posted on Dec 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE washer front loader, Adora model. Won't start, lights on but no response.


There are two options: either a problem in the board, or in the engine, but most likely a board. You need to carry it for testing.

Sep 12, 2018 | GE Washing Machines

2 Answers

Control Panel turns off


HI,
The PCB unit ie the control panel circuit board has gone bad. The probable cause of the same is moisture on the board.

Thanks
proton

Oct 21, 2008 | GE DCVH515EFWW Electric Dryer

1 Answer

Programme selector button, half load button, timer button do not light up. Only the on/off switch lights up. No response when I push the buttons as if it I'd dead?


Sounds like you either have a blown fuse on the controller card, or a bad control card itself. Its advisable to find a licensed product service technician in your area, especially if the unit is still under warranty!

Jan 03, 2016 | Dishwashers

1 Answer

RT50 control panel not responding


It still sounds like the child lock is on since that prevents accidental setting changes on the refrigerator's control panel.The following will NOT work if the child lock function is activated: Freezer Temp Button Fridge Temp Button Power Freeze Button Power Cool Button Ice Type Button Water Button Ice maker Water OR it may be in Cooling Off/Demo Mode. Cooling Off/Demo Mode is a feature used by retailers to display the refrigerator without running the compressor. If your unit is not cooling, and the bars are constantly scrolling up and down the temperature, check your manual for reset advice

Mar 31, 2014 | Samsung Refrigerators

1 Answer

My Kenmore Elite washer model 110.27062600 stopped working. All the front panel lights are flashing on and off for 7 times then pauses and starts blinking again. The machine will not do anything. No...


if this is an oasis model. Try pushing other buttons you should get a touch tone (beep) as a good response. if no sound you seem to have a interface problem. not a main ctrl.

Sep 19, 2017 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Blinking standby light


Have you fixed this yet?Please let me know.Thank You very much!
Tyler

Jul 09, 2009 | TruTech PLV1615T 15 in. LCD Television

1 Answer

''clean'' light flashing (whirlpool Dishwasher GU2300XTLS1 model)


I had the same problem recently and a repair person came to my home to fix the dishwasher. He said he had to reset the control panel. He did this simply by making sure the soap dispenser door inside the washer was closed, then making sure the main dishwasher door was closed and locked. Then he quickly pushed the Heated Dry button and the Hight Temp wash button alternately. He said each button needed to be pushed twice within five seconds. After he did this all the lights on the control panel came on, then turned themselves off before the washer went in to a test cycle. This simple reset fixed the whole problem. Works great so far.

Mar 26, 2009 | Dishwashers

1 Answer

Passanger window problem


this is a new vehicle there is a lock button thats below the controls or above the control make sure its off and not on that can cause this to happen if it is not that then the push button for that window is bad you should be still under warranty take it to dealer if it is that/ Please rate my response thank you very much

Jan 30, 2009 | 2007 Mazda CX-7 Grand Touring

2 Answers

Dryer will not run


dryer starts sometimes if you hold in button. frigidaire gallery series model # GLEQ942CSO. serial # XD350164472. flat panel control board.

Mar 31, 2008 | Frigidaire GLEQ2152ES Electric Dryer

Not finding what you are looking for?
New Bright 384 Holiday Express Animated Electric Train Set Logo

Related Topics:

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top New Bright Toys Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

gerry bissi

Level 3 Expert

4387 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Are you a New Bright Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...