Question about Dell Inspiron 1521 Laptop

2 Answers

It will not power up the light will blink and that is all it is fully charged?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 47 Answers

  • Unplug the power adaptor from the laptop.
  • Remove the battery.
  • Wait 1 minute.
  • Plug in just the power (leave the battery disconnected).
  • Power the laptop on.

  • If the laptop powers on witout the battery, replace the battery and try rebooting with just the battery. If it fails, either the battery needs to be charged or may be bad and need replacement.
  • If the Laptop still does not boot, contact the manufacturer for repair options.

Hope this helps,
-Tor

Posted on Dec 12, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

Sounds like a microprocessor dead or the the motherboard...

take out HDD, RAM, Batterie (if it boot up without, on power only) and try to start.

If nothing happen you can try to replace the microprocessor (You can buy a cheap one on ebay), if still dead the motherboard is F#@?cked...

Good luck

Posted on Dec 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Charger seems to have both red and green lites flashing at the same time no sequence and both batteries connected read 4.0 VDC, are these chargers repariable or throw aways


Your manual is here. The section on charging states, that green blinking means your battery is fully charged but blinking red means that your charger is faulty. I would say repairable.

1. Plug the female connector of the AC power cord (supplied) to the AC receptacle on the charger and plug in the male connector on the AC power cord into the wall outlet.

2. The On/Off LED indicator is blinking RED, this is abnormal. Unplug AC power cord from the on-board battery charger and wall outlet. Charger may need to be replaced. Contact an Invacare dealer or qualified technician.

3. When the On/Off LED indicator light is Off, charger is Off.

4. When the Charge LED indicator light is YELLOW, the batteries are charging.

5. When the Charge LED indicator light is solid GREEN, the batteries are fully charged (as their condition will allow).

6. When charging is complete, unplug the male connector of the AC power cord from the wall outlet and then unplug the female connector of the AC power cord from the AC receptacle on the charger.


http://www.invacare.com/doc_files/1125085.pdf

http://www.invacare.com/doc_files/1125085.pdf

Mar 24, 2016 | Invacare Pronto M51 Power Wheelchair

1 Answer

When battery is charging does the light blink


Depending on the brand. Go to the control panel and click on Windows Mobility Center. It will show if it's charging and how much percentage before it's charged. When it's 100 percent charged and the light is still blinking then it's best to find the user manual to see if it says the light should blink when ever the power supply is connected because when its fully charged it should stop blinking unless the battery is faulty.

Oct 18, 2015 | Computers & Internet

2 Answers

Flood Lights. 180 Degree Motion Activated Solar Powered Floodlight -


Sounds like the batteries are not getting charged. Check to see if there was some packing material in place to keep the batteries disconnected for shipping.

Dec 05, 2013 | Cooper Lighting Flood Lights. 180 Degree...

1 Answer

What does a orange power light mean


please see the commentary. God bless you

  • The majority of laptops will display a solid green, blue or purple battery light to indicate that the battery is fully charged. Most manufacturers indicate that a laptop is in the process of charging by displaying a solid or blinking green, orange, blue or purple light. If your battery indicator light is green, blue or purple, the battery is probably functional, regardless of whether the light is blinking. If the light is solid orange, the laptop is probably in the process of charging.

Battery Error Coneventions

  • Many battery manufacturers use rapidly blinking lights to indicate that a battery's charge level is low. In general, a laptop will rapidly blink orange or red when its charge drops below a certain level until the computer is plugged into a power outlet and charged. If your laptop's battery indicator continues to blink rapidly in orange or red or if it remains red even when it is plugged into the charger, it indicates a problem with your battery or the charger.


Read more: http://www.ehow.com/info_12183593_blinking-battery-light-laptop-mean-charger-not-charging.html#ixzz2fu5qhEWg

Sep 25, 2013 | Computers & Internet

1 Answer

Charging light oepration


Absolutely. It blinks orange (or red) while it is charging. It will glow steady orange when the charge reaches 90% and green when fully charged.

May 20, 2012 | Canon Cameras

1 Answer

Syma S032 Transmitter battery lights blinks even when Brand new Alkaine Batteries are fitted


0) Obviously, helicopter will operate best when fully charged... if charging light gets brighter when unplugged from helicopter, then it's not at full charge. Charge fully, then allow battery to cool for 10 minutes. Good batteries in remote also.
1) Power on helicopter.
2) Place on level surface and let gyroscopes sync. There is a red light inside the body (NOT the red/blue flasher in the nose) that will blink when you turn helicopter on, and will keep blinking until craft is level and stable for a few seconds, then will stop blinking.
3) Make sure left joystick is all the way down.
4) Power on remote.
5) Throttle up (left joystick) until blades move and then all the way back down.
This should get you flying. Let me know
r

Jul 30, 2011 | SYMA Toys industrial Syma S032 Ready to...

1 Answer

The helicopter syma s032 not fly, noy function, not syncronize with the remote control. This charging for 90 minutes and the battery of the remote control is new. The helicopter light led is good, to...


0) Obviously, helicopter will operate best when fully charged... if charging light gets brighter when unplugged from helicopter, then it's not at full charge. Charge fully, then allow battery to cool for 10 minutes. Good batteries in remote also.
1) Power on helicopter.
2) Place on level surface and let gyroscopes sync. There is a red light inside the body (NOT the red/blue flasher in the nose) that will blink when you turn helicopter on, and will keep blinking until craft is level and stable for a few seconds, then will stop blinking.
3) Make sure left joystick is all the way down.
4) Power on remote.
5) Throttle up (left joystick) until blades move and then all the way back down.
This should get you flying. Let me know.

hope this helps,
r

Dec 28, 2010 | SYMA Toys industrial Syma S032 Ready to...

1 Answer

Chair fully charged but quit running without for "no reason"


Are there any blinking lights? The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
Check all of your connections to ensure nothing has come loose. Ensure your batteries are not damaged and fully charged and that the fuses are good. If a power chair has been stored for a while the charger may indicate a full charge but the batteries are full of oxidized crud instead of power and need to be replaced.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Aug 05, 2010 | Electric Mobility Invacare Pronto M41...

1 Answer

Jvc gr-dv800u blinking power light when i plug it in


The camera's battery is charging while the light blinks. When the battery gets fully charged, the led will stay on, indicating that the battery is charged. The manual should explain this, in case you still have it. Good luck, and hope this helps.

Jun 05, 2010 | JVC GR-DV800U Camcorder

1 Answer

Blinking Light low power on my Subaru 2000 Forester


I the light is blinking under strain then it sounds to me that the alternator is not producing enough voltage to feed the power to keep the battery fully charged

Jul 11, 2009 | 2000 Subaru Forester

Not finding what you are looking for?
Dell Inspiron 1521 Laptop Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18426 Answers

Alun Cox

Level 3 Expert

2678 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...