Question about BenQ H200 20.1 in. HDTV-Ready LCD Television

1 Answer

My BENQ H200 20" flat TV/Monitor flashes the startup LOGO when you turn it on and then immediately goes black. This had been previously working perfectly in a home, was stored for 7 months in temperature controlled storage, and then did this when brought back into the home. Any ideas guys?

Posted by on

  • lukeoverhere Dec 13, 2009

    Awesome, thanks for the quick response!, one question though; what is the turner board?

  • lukeoverhere Dec 17, 2009

    No dice after re-soldering. Any other suggestions?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • BenQ Master
  • 5,138 Answers

Yes , Poor solder connections resolder power supply board and turner board.

Posted on Dec 12, 2009

  • ladywinn
    ladywinn Dec 13, 2009

    They call it the main board it is the board that you would connect your cable/satellite, AV jack hook ups for DVDs ect.

  • ladywinn
    ladywinn Dec 17, 2009

    power supply board.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Benq FP222W The monitor switches on and shows the Benq logo, then screen goes black.Tested on 2 computers and still not working.


A bit late I know, but I have the same monitor with the same problem - see here . Problem with mine was one of the backlight assemblies had died. No mean feat to replace these. If you can do it yourself it'll probably cost around $50, otherwise it's for the scrapheap.

Jul 05, 2010 | BenQ FP222W LCD Monitor

1 Answer

I have a VP201m. display flashes at startup and goes black


That's not monitor problem, it's your CPU, probably the Operating System crash!!!( Windows,etc).
Try reinstall it to solve the problem...

Oct 18, 2009 | Computers & Internet

1 Answer

I bought a Lenovo S10e last week, for my mum, the monitor was to small for her, so today I bought a Benq g2220hd monitor, problem is that I dont get a signal on the Benq monitor, I did get the windows logo...


first i would check the compatibility of the monitor to the laptop and see what they say, and if it should work odds are the monitor will have to be set manually through the laptop itself or on the menu of the monitor itself, may take a while playing cat and mouse but im sure you will get it, more then likley from what im understanding its a resolution issue between the monitor and the laptop, especially if you got the windows logo on the boot


enjoy

Jul 06, 2009 | BenQ Computers & Internet

1 Answer

ACER 22" monitor flashes on at PC startup, then goes black


Your monitor has a bad INVERTER, look on eBay.

Jun 27, 2009 | Computers & Internet

3 Answers

Monitor E172FP only fashes on then turns black.


its a bad solder/heat problem with the power board you need to repalce eaither the board or parts on the board the parts on the board are:

Q743 - FU9024N
Q741 - FU9024N
Q759 - 2SC5707
Q739 - 2SC5707
Q760 - 2SC5707
Q740 - 2SC5707

and part PF751 the black fuse - 3A 125V

i don't promise that this will fix it but its worth a shot

Apr 10, 2009 | Dell E173FPb 17" TFT LCD Monitor

2 Answers

Power but no picture


Try to re-solder the inverter part of the board. You may recognize that part where the 4 connectors from the backlight tubes can be found.... usually the small transformators (sorry, my technical English is not good) have bad soldering eyes after longer use. This may work if backlight turns on for a few seconds, then the power led is still alight but screen goes dark.... the inverter then "thinks" one of the tubes might be defective and turns power off. Hope this helps a little...

Jun 20, 2008 | BenQ FP71E 17" LCD Monitor

3 Answers

Monitor Randomly Turns Black


I have exactly the same problem with my Benq FP71E+ ..

What i found is a temp fix is this :

When monitor dims and goes black i turn it off , hit the bottom left side (near the BENQ logo) turn it on again and it works ..

This works every time for me . But after a while it switches off again , could be 5 minutes could be 5 hours . Its random

May 02, 2008 | BenQ FP71E 17" LCD Monitor

1 Answer

Benq monitor flashes off and on


It has a large capactor inside that is leaky, needs changing. In powersupply.

Sep 14, 2007 | BenQ FP737S-D 17" LCD Monitor

1 Answer

Can not diaplay when connected to external TV tuner Box(fontech)


'The Monitor goes blank when the box is powered' what does that mean exactly? what box? What was the monitor doing before the said box was pwered?

Jun 04, 2007 | BenQ FP91G+ (Black)

Not finding what you are looking for?
BenQ H200 20.1 in. HDTV-Ready LCD Television Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75289 Answers

yadayada
yadayada

Level 3 Expert

78919 Answers

Lawrence Oravetz

Level 3 Expert

10263 Answers

Are you a BenQ Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...