Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer 80 series 4 years old

Stop spinning and agatateing we replaced the coupling it started working but with a loud noise only while spinning and agatating if you take inside out it spins fine but when u put it back in the noise again and it seems to be spinning and agatating at the same time can u please help thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: kenmore washer 80 series 4 years old

My washing machine is not rinsing and spinning

Posted on Jan 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kenmore series 80 top loader washing machine 11029852991. When turned on spin cycle, makes a loud grinding kind of noise. I believe unit may have been overloaded with three kingsized bedsheets &...

unless some thing inside the washer is broken i would say the drum bearings have started to wear out badly,,,my washer will easly take 3 king size bed sheets and covers,,,that not a lot realy,,,how old is your unit? and how many washes has it done,,,years old and 1000's of washes?

Jul 16, 2010 | Kenmore Washing Machines

1 Answer

Washer wont spin in the spin cycle.Washer was full of water and making a buzzing noise.If you have any suggestions what it might be that would be great. Kenmore 80 series washer about 11 years old.

sounds like the lower bearing on the trans mission shaft is seizing up on you. had a frigedair that did the same thing. i took it apart to replace, but could not buy separate. it only came with a purchase of a new transmission,which ran $175- 275. so i junked it out. washer was only 5 years old.

May 29, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 90 series washer, wont spin, coupler?

my washer wouldn't spin or drain and it was a baby sock stuck in the pump! unplug everything and then take the hoses off and look in the pump! hope this helps!

Mar 10, 2009 | Washing Machines

1 Answer

Kenmore makes whining noise as it tries to spin

The drive coupling has probably broken. Usually happens when you overload the machine. Easy fix. READ MORE

Jan 21, 2009 | Kenmore 24902 Top Load Washer

1 Answer

Kenmore 80 series 110 washer making loud noise during final spin

Make sure all springs are still in their place tilt the machine back and look under it and you can see them. 2nd all legs must be level as well as the floor.

Dec 21, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Loud noise in slow down spin mode.

when it is in high spin then you stop the washer it makes a thumping noise until the basket stops sort of like a flat tire sounds to me like you need a drive block

Dec 18, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series agitator problem

time to look for a new washer, this is a gearcase problem, or cluth. Not easy to fix , unless know how.

Nov 08, 2008 | Washing Machines

1 Answer

Broken Washer

it could be the direct drive coupling that connects the motor to the transmission. fill it up with water and see if it will agitate, if it will NOT agitate then it is a good chance that this is the problem. 0404472.jpg

worse case scenario is the transmission is bad, but this is unlikely.

Aug 04, 2008 | Kenmore 25862 Top Load Washer

1 Answer

Kenmore washer 80 series 4 years old has prob

You may not have the coupling seated properly. However, if the unit is agitating and spinning at the same time, you may have a more serious transmission problem.

Jan 20, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides