Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer 80 series purchased at sears 4 years ago

Waher stoped spinning and agatating my husband took it apart and the coupling was broke we went to sears and bought a new coupling replaced that he put it back togather fills drains it started spinning and agataing again but with a loud noise if you take out the inside of the washer it dose not make the noise but when you put it back in noise again and it seems to be trying to spin snd agatate at the same time can u please help

Posted by on

  • Anonymous Jan 26, 2008

    I replaced the drive coupling to correct no spinn no agitate.

    Now it agitates but will not spin and will not drain. Is there some indexing done when motor is reinstalled?

  • Anonymous Sep 28, 2008

    i have the same issue..im just trying to figure out how to first get to the coupler so i can replace it...where do i start to take the washer apart?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Check my other post on this problem

Posted on Jan 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer wont spin in the spin cycle.Washer was full of water and making a buzzing noise.If you have any suggestions what it might be that would be great. Kenmore 80 series washer about 11 years old.


sounds like the lower bearing on the trans mission shaft is seizing up on you. had a frigedair that did the same thing. i took it apart to replace, but could not buy separate. it only came with a purchase of a new transmission,which ran $175- 275. so i junked it out. washer was only 5 years old.

May 29, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 90 series washer, wont spin, coupler?


my washer wouldn't spin or drain and it was a baby sock stuck in the pump! unplug everything and then take the hoses off and look in the pump! hope this helps!

Mar 10, 2009 | Washing Machines

1 Answer

Kenmore 80 series washer won't spin out clothes


What you have is a broken drive coupling
93a2ebd.jpg In order save redundancy I have loaded a page with pics and proceedures on this subject. CLICK HERE


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Dec 28, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer 80 series


you need to check the lid switch, does it click. you can unplug and then remove the 2 screws to see it, if it looks like it is coming apart then the lid switch is bad. you can buy one for about $40 or so dollars. i am assuming it doesn't spin either.

Dec 19, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 Series won't spin out


if the unit washes ,,and dont spins check your lid switch first...

Oct 25, 2008 | Kenmore 24902 Top Load Washer

3 Answers

Kenmore 80 series washer 4yrs old


suspect gearcase problem or broken brake release on bottom side of basket drive

May 20, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore washer 80 series 4 years old


my washing machine is not rinsing and spinning

Jan 20, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer 80 series 4 years old has prob


You may not have the coupling seated properly. However, if the unit is agitating and spinning at the same time, you may have a more serious transmission problem.

Jan 20, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series


I'm having the same exact problem, you posted this issue in Oct, have you found a fix?

Oct 18, 2006 | Kenmore 24902 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

fordexpert

Level 3 Expert

5690 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...