Question about Bakers Pride BAK-DS805 Gas Single Oven

2 Answers

Door on my bakers pride y600 pizza oven

The bushing on the door has all but disappered. Can these be replace easily? Also if so can you advise.


Thank you

Posted by on

  • Anonymous Sep 19, 2008

    the flame came out from the burner is so yellow, is that normal?

  • Gary Davd
    Gary Davd May 11, 2010

    is that unit made by Blogett?? do oy uhave a model3??

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Theses are called 3/4 door busings and should be changed when you replace the left side door rod (complete)and are available from any parts depot that sells bakers pride parts

Posted on Nov 25, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same ovens and you only get the bushings ac far as i know when you buy the door spring assembly .make sure you get the right one because there are 2 sizes ,the older ovens have a thicker bushing.and its not that hard to replace if you can take it apart.that door is very heavy so be careful

Posted on May 08, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bakers pride problems


I am betting that a lift assist spring has come unattached. You will have to take it apart to find where it did and how to reattach.

Aug 31, 2014 | Ovens

1 Answer

I have a Bakers pride y-600 oven . What is the best way for top door to be taken off ??


On the left side, remove the knobs and cover. The spring holding the door closed needs to be removed. Have someone hold the door closed while removing the door spring. Now let the door open and you will see two screws holding the door to the door rod assembly on the left side. These screws are usually 9/16. After removing the two screws, the door will pull off the door pin that is located on the right side.

Oct 24, 2013 | Bakers Pride Y-600 Gas Oven

1 Answer

I need to get 2 slates for y600 pizza ovens do you sale them.


When your looking for this part it is called the "Stone Deck"

36" X 60" for most Y600 Models. FixYa is a "help you" site not a full blown retail outlet.

This is the Y-600-(old style) manual:
http://www.bakerspride.com/pdfs/Y-600%20Parts%20List%20OLD%20STYLE%207-05.pdf

This is the Y-600 manual: http://www.bakerspride.com/pdfs/PartList/Y-600%20Parts%20List%20U6050A%208-08.pdf

This is the Y-600-DSP manual:
http://www.bakerspride.com/pdfs/Y-600%20DSP%20%20Parts%20List%20U6051A%202-07.pdf

Their website went down for maintenance as I was doing this. But their phone number is on the website. http://www.bakerspride.com/

Thier manuals list is here. Note the price list for parts is at the very bottom block top of 3rd row.
http://www.bakerspride.com/manuals.asp

Thanks for choosing FixYa.

Kelly

Sep 14, 2010 | Bakers Pride Y-600 Gas Single Oven

1 Answer

Need a wiring schematic for a Bakers Pride p44 double pizza oven.


hi..there is color coding on the wires..BLACK WIRE is the live wire(wire #1) which should be connected on top of the terminal supply of your oven (if vertically positioned) and sometimes to the leftmost right(horizontally positioned),then the RED WIRE to the bottom (vertically positioned),or rightmost part (horizontally positioned) and the WHITE WIRE is at the center(both horizontally/vertically positioned0 and the GREEN wire must be connected to the grounding of the unit just below/beside the terminal supply of your oven..hope this helps

Apr 15, 2010 | Bakers Pride P-44S Oven

1 Answer

Bottom oven pilot light goes out intermitantly.


adjust the flame so that it stays on the thremal couple and keeps it hot if it is off by 1/4 inch it will not work.

Jul 22, 2009 | Bakers Pride FC-616 Gas Single Oven

1 Answer

Thermo coupler on all the time, push in button, shuts off gas


Bad Safety valve. (valve w/red button). Thermocouple keeps the magnet open to keep pilot and so gas can flow to burner. Make sure pilot is clean and strong and hitting thermocouple. If it doesnt stay lit replace Safety Valve.

Dec 17, 2008 | Bakers Pride FC-616 Gas Single Oven

1 Answer

Pizza oven bricks need to be changed


You must use a long crowe bar lift the brick and pull it out need the size of the brick to let you know how much and where to get it if it a 2inch thick they are no longer sold most lilkely it 1 1/2 inch

Oct 16, 2008 | Bakers Pride BAK-DS805 Gas Single Oven

1 Answer

Thermostat setting for bakers pride y600 oven.


Hi, those screws are for the calibration of the knob to the thermostat, so your calibration is correct. Most likely you will have to contact a servicer to check the calibration, and set you knob and plate where they will align with the actual temp again.
Hope that helps, and thank you.

May 19, 2008 | Bakers Pride Y-600 Gas Single Oven

1 Answer

Too hot


Hi, not sure if you ever received a reply, but there is a setting known as "bypass" on commercial thermostats, if you took the cover off to replace it, you can access this screw, it is part of the body of the thermostat, either to the left or the right of the knob shaft, usually has a "B" stamped, or molded into the body. What this setting does is when the thermostat reaches temperature, it would normally close, shutting off the supply to the burner, thus the temp would begin to fall, by the time it opened back up, the temp would have fallen too much, causing a large temp swing. The bypass setting opens or shuts a passage that "bypasses" the thermostat main valve, keeping just a little burner, making the swing, or fluctuation smaller. So, you probably have a setting too big, causing your bypass flame to be too big, raising, or keeping the temp too high, try turning it in (cw) to lower it slightly, a small turn makes a huge difference, so go easy. Hope that helps, and thank you.

May 08, 2008 | Bakers Pride Y-600 Gas Single Oven

Not finding what you are looking for?
Bakers Pride BAK-DS805 Gas Single Oven Logo

Related Topics:

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bakers Pride Ovens Experts

ashburton

Level 3 Expert

417 Answers

Paul Carew

Level 3 Expert

3238 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bakers Pride Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...