Question about Pioneer DEH-1600 CD Player

1 Answer

Wiring diagram aftermarket installation into 1991 buick regal

Posted by on

1 Answer

Re: wiring diagram - Pioneer DEH-1600 CD Player Car Audio Receivers

Wirng diagram

Posted on Jul 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I hard wire jvc kd sr60 to a 2000 Buick regal the factory harness was cut off

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Wiring diagram to many popular car audio devices are given.

May 11, 2015 | JVC Car Audio Receivers


Vehicle Installation Wire Charts For Remote Starter, Radio and Special Finance...

Hi there, I am the owner and operator of Value Perforemance Shop. Our website isn't all about selling products. We also specialize in wire installation charts and diagrams for installing Remote Starters, Aftermarket Radios, and Special Finance GPS Unit Such as PassTime and iMetrik GPS Units. All diagrams and charts are free. Myself and my techs have installed thousands of units and devices in all types of vehicles. Database is charted for Smartphones as well so you can take the diagrams with you. Database includes charts with wire locations, if vehicle is equipped with special features and so on. Diagrams are supplied to give a general idea of Relay operations. Website is new and we are here to help not only other installers but the general public. Our database is updated weekly with vehicles that aren't already listed. We have already added plenty of charts and more are coming. Visit link below for charts and diagrams for your vehicle.
Value Performance Shop

on Jul 05, 2010 | Car Audio Receivers

1 Answer


If you are referring to installation and have the aftermarket wiring harness, The wires should be color coded. RED, YELLOW, & BLACK are power, ignition and ground. These should correspond to matching wires on the back of the head unit (CD player). Match the colored wires from the back of the unit to the same colored wires on the aftermarket harness and then connect them using wire connectors/wire nuts. Once you have them into the correct order the aftermarket harness should connect into the harness in your vehicle. I hope this answers your question =)


1 Answer

How do I install a volfenhag cd player into a ford taurus

you need a deck.
a plug for the factory wiring harness(unless you just want to snip wires)
an install kit for the dash
i just did the same thing in my buick regal and it was pretty simple
you should be able to find the install kit and plug at walmart. the plug cost me $8 and the kit was $12. so for $20 you can buy whats needed to install the deck. now you just need to buy the deck.
good luck

Apr 12, 2012 | Car Audio Receivers

1 Answer

I have a 1991 ford festiva i changed my radio and now my shifter and my dash lits dont work are they wired in with the factery radio

Hi, the factory radio uses the illumination wire, but the aftermarket radio does not. You have to make sure that wire is taped off so it doesn't short the illumination circuit. Check your tail lights fuse. If it's blown, pull the head unit and disconnect/tape off the illumination wire (blue with a white stripe) from the factory harness. Then put in a fresh fuse. If you have more questions, please specify the model of the head unit.

1991 Ford Festiva Car Radio Wire Diagram
Car Radio Battery Constant 12v+ Wire: Blue/Red
Car Radio Accessory Switched 12v+ Wire: Red/Black
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Blue/White
Left Front Speaker Positive Wire (+): Blue/Red
Left Front Speaker Negative Wire (-): Blue/Yellow
Right Front Speaker Positive Wire (+): Blue
Right Front Speaker Negative Wire (-): Blue/White
Left Rear Speaker Positive Wire (+): Blue/Red
Left Rear Speaker Negative Wire (-): Blue/Green
Right Rear Speaker Positive Wire (+): Blue/White
Right Rear Speaker Negative Wire (-): Blue/Green

Nov 21, 2011 | Car Audio Receivers

2 Answers

I have a 1991 buick regal limited. took out the stock radio and cassette player and put a jvc kd-r610 in its place. hooked all the wires up,grounded it,and it doesnt turn on

Double check that the wires are connected properly. Also verify that all of the leads are operating as they should with a multimeter. If you used a harness adapter verify both before and after the adapter.


1 Answer

How to install an aftermarket radio in a 2004 Chevy C2500

You will need a wiring harness for the model truck you have, plus a filler kit. The filler kit is what the radio will actually attach to and fill the space left by the factory radio. Follow the diagrams for wiring from the harness and the aftermarket radio. Generally, there are 8 wires to be connected for a four speaker system. In addition, you will connect a ground wire (black), a yellow wire (constant power), a red wire (this is to turn the radio on and off with the ignition), and a solid orange wire (illumination). Because you have a GM product you will also need an antenna adapter. All these things can be purchased at Best Buy, or WalMart.

Apr 22, 2010 | Kenwood Car Audio Receivers

1 Answer

I need the cd player wire diagram for a 1994 4runner

constant is blue/yellow or blue/black
switched is gray
ground is brown on my 4 runner thats all i i know!!

Jul 30, 2009 | Kenwood KDC-1011S

1 Answer

Need wirin diagram for sony cdx-gt310

Here is the schematic you need.

I would advise buying the aftermarket wiring harness female/male so you can just plug it in.

Feb 08, 2009 | Sony CDX-GT310 CD Player

Not finding what you are looking for?
Pioneer DEH-1600 CD Player Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4679 Answers


Level 3 Expert

56797 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides