Question about Ulead Videostudio 8 for PC

2 Answers

I'm trying to install the EasyCap device that I just purchased. I'm being asked for the serial number, which is supposedly on the "bag," but there is no bag and no serial number. Also, I get a message stating there is no device to capture images from. Please help.

Posted by on

  • Vanessa S Dec 13, 2009

    I still need help. A VCR is not considered a video capture device? I bought the EasyCap to transfer video footage from a tape to a DVD. Can't I do that with the EasyCap? Also, is there any way to get the serial number without having to return to the shop where I purchased the EasyCap? It's a 7-hour trip by bus that I would rather not make if I don't have to. Thank you.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Easycap serial number
You will find this on your installation CD
Go to Browse on the CD and click on it
"Files on this CD" will come up click on the Icon that has SN underneath it and your serial number is revealed
Maxann

Posted on Apr 06, 2010

Testimonial: "Thank you very much! I'll try this right away!"

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 729 Answers

Hi there and welcome here,

I need some additional info please :

Is the name of the software Ulead Videostudio 8 for PC
OR
EasyCap

Normally you get the serial form the shop you have purchased from, if you do not have it in the bag, please ask there where you have purchase from.

A device to capture images is normally a Web Cam, if you do not have one, you have to buy one

Have a nice Christmas

Let me know

Please rate my answer



Posted on Dec 12, 2009

Testimonial: "thank you."

  • Peter Dragonetti Dec 13, 2009

    Hi there again,

    you have to phone the shop where you buy the software, normally you find the phone number on receipt , you can find more information about serial and manaul here>
    http://www.ulead.com/learning/learning.h...

    If you not find it on the site, please e mail them

    let me know


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How To Install EasyCap On Windows 7


easycap was not meant to used on windows 7 (i think). but i have uploaded all my easycap drivers for you,.... as always right click exe's and in compatibility mode for windows xp service pack 2. if it still not working after driver install go device manager try update drivers from there.
easycap reccomend - ulead video studio for video editing.
the rar file has no passwords. easycap driver and stuff

Apr 22, 2016 | DekCell EasyCap USB 20 Video Capture...

2 Answers

Looking for serial number in order to load Easycap. Lost evelope


Contact the MFG. they will have your info if you "bought" the hardware from them and registered it as the information in box asked you to. They will issue you a new key. I had to do this just over a week ago, I need the key for the same device. I had no problem getting a new serial from the MFG. :)

Sep 21, 2010 | DekCell EasyCap USB 20 Video Capture...

1 Answer

I have an easycap and i want to install the video studio but i have lost my serial number what can i do.


783A2-8A000-05520256

it works dont worry if it dont just ask ppl for theirs

Jul 02, 2010 | Cameras

2 Answers

I have easycap capture device DC60 but the cd supplied will not load on to my computer.I have disabled the firewalls etc to no avail. I have vista on Ei systems acpx86 32 bit have you any suggestions....


Have you tried finding the right drivers for the device?
Once the drivers are installed, the device should work fine with all software that supports video capture, including movie maker.

May 14, 2010 | Computers & Internet

1 Answer

I have the intel create and share camera pack. the problem i am having is after inserting the disk. I am being asked to type in serial number, which is supposed to be on the jacket of cd rom disk. I cant...


1st You download Webcam Driver. Intel Cam Driver Free After this install the Webcam driver in the system.
Installation of Webcam Driver
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Unknown Device or printer device where yellow Question Marks sign on it.
  • Right click on it and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be install.

Apr 07, 2010 | Intel Create And Share Camera Pack Webcam

1 Answer

Purchased EasyCap video capture device to transfer DV from Digital Video Camera to Computer, have installed Driver receive with devise and shows as Smart Video Capture on desktop. when I attach device and...


it seems that you havent followed the installation procedure correctly. most of the devices comes with written installation directions.
now uninstall the drivers form your computer, disconnect the device from the computer and reboot the computer. then install the driver of the device first(at this point dont attach the device to the computer) after installing the driver than attach the device to the computer. the operation system will automatically detects the device and install it, or if you've asked for the driver click the automatic dectect and install button.

Mar 24, 2010 | Computers & Internet

1 Answer

Can't find serial number for installation of easycap capture device


Have you installed the CD software that came with the EasyCap capture device, and are now trying to retrieve the serial number for some reason?

Something you may try, not advertising this as a direct solution.
I would advise trying MAGIC JELLY BEAN.
Funny name, but this software will find product key codes, and perhaps the serial number of your EasyCap capture device, IF you have installed it already.

http://www.magicaljellybean.com/keyfinder/

"It also has a community-updated configuration file that retrieves product keys for many other applications. "

Oct 12, 2009 | Computers & Internet

Not finding what you are looking for?
Ulead Videostudio 8 for PC Logo

2,296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ulead Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Karan Sethi

Level 2 Expert

157 Answers

 Grubhead
Grubhead

Level 3 Expert

5547 Answers

Are you an Ulead Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...