Question about Sony KV-32S35 32" TV

1 Answer

No Picture, has Sound

The stand by light keeps flashing, but I have sound. Unplugged it for 5 minutes and plugged it back in. Problem continued. Menu options will not come up either as per manual trouble shooting option.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers
Re: No Picture, has Sound

The problem is internal,theres what is called the ''lines transformer'' inside thats what is faulty,call your tv technician for services

Posted on Feb 24, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

I have a sony tv model kv-27v42 i have sound but no pictture and stand by light blinks what is the problem

How many times do this standby light blinks at a time of switch on? These blinks are fault indications. From the number of these blinks, you can get an idea about the faulty circuit section inside it. Count it. If you wish to get more details about the blinking codes to Sony TVs, check this link.

Feb 24, 2013 | Standard (CRT) Televisions

1 Answer

No picture or sound


Looks like a power supply issue the only solution to fix this up is to get it repaired.


May 03, 2008 | Toshiba 32HFX72 32" TV

1 Answer

Sony FD Trinitron WEGA

Here's my suggestion , unhook all the external components to the TV and leave the TV unplugged for more than a few minutes (a day/overnight). The next day plug the TV into the wall outlet (not the powerstrip) without anything hooked up to it, and turn it on. See if it comes on. Sometimes unplugging for a few minutes/hours is not long enough for it to reset itself.

Dec 28, 2007 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Standby light continuously flashes with no picture or sound

count the number of blinks; you may have to unplug the set and try to turn on again--if it does not blink in a sequence(3 blinks, a pause etc) the set is in shutdown and many things can cause this.

Aug 06, 2009 | Sony KP-53HS10 TV

1 Answer

My sony kv32hs500 just stoped working and standby light flashing

sir you need to un plug your t.v set and plug it again to reset the memory setting...

Aug 06, 2009 | Sony FD Trinitron WEGA KV-32HS500 32" TV

2 Answers

Tv won't power on, stand-by light blinks 6 times continously

just unplug tv 5 minutes. and plug it again. power on again. if not reset tv.

May 25, 2009 | Sony FD Trinitron WEGA KV-32HS510 32" TV

1 Answer

Model KV-27S40; no picture/no sound

Most likely IC 541 is faulty on the A board. The IC number is TDA8172

May 29, 2008 | Standard (CRT) Televisions

4 Answers

Sony kv32fs16 problem

The STANDBY light is flashing on the television and there is no picture or sound. Solution
sp.gif sp.gif The STANDBY light will flash if an issue is detected within the television. This can sometimes be resolved by simply following the steps below to reset the television.
  1. Turn off the television. IMPORTANT: For a projection television that uses an internal lamp, wait 5 minutes after turning off the television to allow the lamp to cool before continuing with the following steps.
  2. Unplug the television power cord from the electrical outlet.
  3. Let the television remain without power for 60 seconds.
  4. Plug the power cord back into the electrical outlet. NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
  5. Turn on the television.
If the issue is still unresolved after following all of the troubleshooting steps, service may be required. Please note the number of times the STANDBY light flashes and relay that information to the service center.

Nov 02, 2007 | Sony FD Trinitron WEGA KV-29LS35 29" TV

1 Answer

Takes about 5 minutes for picture to appear... Then every one to two minutes the picture disappears. It comes back on for 1 - 2 minutes then repeats. When set if first turned on, the stereo/stand-by...

Takes about 5 minutes for picture to appear... Then every one to two minutes the picture disappears. It comes back on for 1 - 2 minutes then repeats. When set if first turned on, the stereo/stand-by light (red) flashes on/off until just before picture first appears .if your tv is very old than it might be due to crt getting weak crt base loose loose contact in power supply thanks

Sep 09, 2007 | Sony KV-32S12 32" TV

1 Answer

Crakling, snapping sound from back edge of circuit board. No burning smell. Sound continues after power is shut off and unplugged. Any suggestions?

If your flyback transformer has a pinhole in it, there will be snaps and flashes of light, but only when the set is on. If one of the parts in the primary circuits of the main power supply is arcing, it will stop once the plug is pulled from the wall. If you dim the lights in the room and take the back off, or look through the ventilation slots in the back, do you see any flashes of light, sparks or any type of arcing? You said the noise continues when the set if off and unplugged. Do you mean it keeps on going and going, or does it only continue for a second or two?

Sep 02, 2007 | GE 31GT740 31" TV

Not finding what you are looking for?
Sony KV-32S35 32" TV Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides