Question about Kitchen Appliances - Others

1 Answer

The post holding the kneading blade came out of bread pan

The post that holds the kneading blade in my bread pan of my Sunbeam Breadmaker madel 5891 has come out. How can I fix it? Or, where can I buy a new a pan?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 433 Answers

Hi,
The sealed bearing on the bottom of your pan is broken. There is no fix for it...sorry. If under warranty sunbeam will replace it. Try looking on eBay for a new pan. ( I have same model as you and the bearing froze after 5 years of heavy use. The pans on eBay were very expensive, so I bought a new Sunbeam iat Walmart in New Hampshire for just under $50.00 and no tax).

Posted on Dec 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get a manual


http://kitchen.manualsonline.com/manuals/mfg/sunbeam/5891_1_2.html

Dec 25, 2015 | Sunbeam 5891 Bread Maker

1 Answer

What is little metal hook for with breadmaker


Hi Bob: I believe the metal hook you are referring to may be the kneading blade. The kneading blade is attached to the spindle at the bottom of the bread pan before begining to add your ingredeints.

A link to your manual is here:

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000063299.pdf

Dec 09, 2012 | Sunbeam 5891 Bread Maker

1 Answer

How do you keep the kneading blade from being baked into the bread?


Hi, You can take the kneading blade out of the machine after the last kneading cycle and before the final rise. Take the pan out of the machine to do this just to be on the safe side, Hank

Dec 06, 2010 | Sunbeam 5891 Bread Maker

1 Answer

The motor will turn on it's own but will not turn the kneading blade in the pan when that is put into the breadmaker. makes a soft "thunk" as it tries to turn it. It's like the gizmo at the...


Hi, First, the take empty pan and paddle out of the machine. Try to spin the paddle by hand. If it spins freely that's great. If it does not spin freely the sealed bearing that allows the paddle to spin has failed and you will need a new bread pan. If everything is okay, keep the pan out of the machine and go to a kneading cycle. Look through the window to see if the motor shaft is turning. If not then the belt is loose or fell off. Hank

Nov 02, 2010 | Sunbeam 5891 Bread Maker

1 Answer

How to get kneading blade from breadmaker sunbeam 5891


These are a pretty common blade. I'm pretty sure you can find one on ebay? If you don't ebay let me know and I will try to find another source.

Sep 18, 2010 | Sunbeam 5891 Bread Maker

1 Answer

Sunbeam Breadmaker Pan


You can call 800-528-7713. I just ordered and pan and blade for $ 31.18, including shipping. They have a website: www.jardenstore.com. I just went to the site, and couldn't find the pan, so I would recommend calling the number.

Jan 09, 2010 | Sunbeam 5891 Bread Maker

2 Answers

Wire piece


The small end of the wire thing works to dig the paddle out of the loaf, where it always sticks. I have no idea what the other end is for. Hope this helps.....a bit.

Feb 10, 2009 | Sunbeam 5891 Bread Maker

1 Answer

Kneading blade stays in the bread


I had that problem with my Zoji breadmaker. I sprayed a little non-stick spray on the blad and it worked. You can also spray the pan.

Jan 06, 2009 | Sunbeam 5890 ExpressBake Bread Maker

1 Answer

Kneading Blade chattering


I had the same problems with another manufactures model. I found that the bread pan needs to slot in the machine only one way. The pan will fit in the machine with the handle both vertical and parallel to the front. However to stop the clacking noise I found that one way in the machine..it makes noise, the other way it doesn't. You'll have to try. If it makes noise, open the lid and turn the bread pan 45 degrees in either direction and secure it back in the breadmaker then close the lid. I hope this helps. If it does, remember how the pan is in the machine for next time to avoid the noise.

Jan 02, 2009 | Sunbeam 5891 Bread Maker

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

684 Answers

Marvin
Marvin

Level 3 Expert

83083 Answers

Irene Tulloch

Level 2 Expert

484 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...